1.Hello, makeflyeasy! I build different designs of airplanes and gliders, I have my own youtube channel, which is viewed by my colleagues and subscribers. My interest now is related to a flight controller that can operate in vibration conditions, for example, in aircraft with an internal combustion engine. I would like to receive your flight controller PixPilot C3 for testing on an aircraft with an internal combustion engine .
I have a radio-controlled aircraft with a LASER 200 internal combustion engine, which has been tested and can fly on radio control. I’d like to put your flight controller on this plane.
This is a photo of my plane and a link to the test https://www.youtube.com/watch?v=XGRi1nDLpAk
Hi there! I am a longtime Arducopter user, and have made many unusual flying machines using Arducopter. My next project is a more traditional 700 size helicopter which requires a more fully featured flight controller, such as the PixPilot C3. I am also willing to do some vibration performance testing on the flight controller, such as I’ve done previously here: Testing internal IMU damping solutions of popular flight controllers
Two of my previous flying machines have been bicopters:
I look forward to testing the new flight controller!
Jason
I am impressed with the number and variety of your planes, and look forward to the test flights of the (ICE) planes you have mounted on them.
I’ll private message you the receipt link later.
I am looking for upgrade my old Pixraptor controller (with old buggy CPU, that have only, half of Flash usable) , for this 5 inch drone with PX4FLOW Optical Flow Camera and GPS.
Mu drone photo:
PixPilot C3 flight control installation, testing, and flight video on a fixed wing Fighter.PixPilot C3 flight control installation, testing, and flight video on a fixed wing Fighter.