I think, I found some inaccuracies in the Wiki. How can I help?
Two examples:
# 1
https://ardupilot.org/plane/docs/common-speedybeef405wing.html
RC Input
CRSF also requires a TX2 connection, in addition to RX2, and automatically provides telemetry.
and this is a screenshots from SpeedyBee Wing
manual
# 2
https://ardupilot.org/plane/docs/common-holybro-kakutef7mini.html
UART Mapping
SERIAL6 → UART6 (TX only unless BRD_ALT_CONFIG = 1, then RX available also)
but in the AP Plane 4.4.4 parameter list l have here, there is no ‘BRD_ALT_CONFIG’
Only two examples, but there seem to be more than those two inaccuracies which catch my eye in the documentation. Could possibly confuse some users.
br KH