Droidplanner v1/v2 connection failed using minimosd extra?

Hi arth
great project from your teams
prevoiusly i have no problem to connect droidplanner in my galaxy TAB7 via telemetry usb.

recently i upload minimosd extra with new parameters change into APM2.6 (quad) and after that droidplaner failed to connect both i try v1 or v2.

but conection usb telemtry to PC is ok.

anything wrong with minimosdextra setting conflict with droidplanner on my tab?

this setting i change according to minimosd extra.

SERIAL3_BAUD, 57 (telemetry output at 57600)
SR3_EXT_STAT, 2 ( 2hz for waypoints, GPS raw, fence data, current waypoint, etc)
SR3_EXTRA1, 5 ( 5hz for attitude and simulation state)
SR3_EXTRA2, 2 ( 2hz for VFR_Hud data )
SR3_EXTRA3, 3 ( 3hz for AHRS, Hardware Status, Wind )
SR3_POSITION, 2 ( 2hz for location data )
SR3_RAW_SENS, 2 ( 2hz for raw imu sensor data )
SR3_RC_CHAN, 5 ( 5hz for radio input or radio output data )

SR0_EXT_STAT, 2
SR0_EXTRA1, 5
SR0_EXTRA2, 2
SR0_EXTRA3, 3
SR0_POSITION, 2
SR0_RAW_SENS, 2
SR0_RC_CHAN, 5

thanks

problem solved
my mistake actually.

the radio telemetry is high input power.
but i forgot to disabled “Power Saving” in my galaxy tab 7.
after disabled it, and restart my tab. my galaxy tab give proper power to radio telemetry usb.

problem solved.

@ultrojo? Great catch, and thanks for sharing the info.