DO_CHANGE_SPEED on a Tali H500 not supported in MP 1.3.10?

Ground Control Software Mission Planner
1

Here the same thing happens with DO_CHANGE_SPEED. The Lat and Long datas are lost when downloading back to the H500.

The line with “178” ID has lost the Lat and Long parameters.

File before upload:

4 0 3 178 5.000000 20.000000 0.000000 0.000000 40.248047 5.371558 30.000000 1
5 0 3 16 0.000000 0.000000 0.000000 0.000000 40.248144 5.371883 30.000000 1

File after reading the data from H500:

4 0 3 178 5.000000 20.000000 0.000000 0.000000 0.000000 0.000000 0.000000 1
5 0 3 16 0.000000 0.000000 0.000000 0.000000 40.248146 5.371882 30.000000 1

2

do change speed does not accept a lat and long.