Dev Call Jul 24, 2023

CraigElder · July 24, 2023, 10:57pm

Issues & Pull Requests

github.com/ArduPilot/ardupilot

AP_AHRS: give clearer prearm messages

ArduPilot:master ← Hwurzburg:messages

opened 03:32PM - 07 Jul 23 UTC

Hwurzburg

+13 -6

this comes up over and over.... two alternatives for improvement....the latter …commit being suggested by Tim T. and I think I agree....at least it gives the user directions on how to resolve it... but this is about as clear as you can make it unfortunately since the inconsistency can be from many sources whichever the group decides on I will remove the other/squash @peterbarker we need to discuss TIm's idea of automating this page also : https://ardupilot.org/plane/docs/common-prearm-safety-checks.html....I sent you a metadata format proposal edit: Peter and I have talked at length....there are 3 options: 1. I try to improve the wiki page on prearms....which I have done 2. we try to add metadata to selected cryptic prearms like this and parse to auto update the wiki docs in some manner...currently there are over ~400 potential messages although many don't need explanation 3. we add a mechanism to provide the GCS with json base information on selected prearms that allow clicking in the messages screen to provide detailed resolution data #3 is a very large effort #2 is many days of python work and testing plus the C++ effort (which Peter is unable to do with his current load) #1 is done, but any other nagging messages can be added and expanded... inflight error messages are another topic and beyond scope here

Filter Tool
https://firmware.ardupilot.org/Tools/FilterReview/

Plane

github.com/ArduPilot/ardupilot

Plane: stable 4.4.x issues list

opened 03:33AM - 01 Dec 20 UTC

tridge

Plane VTOL-Plane DevCallTopic ReleaseAdmin

This is an issue to gather key issues for the plane 4.2 release - [ ] display …message on pilot override active in VTOL pos controller (can prevent descent stage) - [ ] add check for RC3_MAX at least 100 above RC3_MIN - [ ] scripting bug: https://github.com/ArduPilot/ardupilot/pull/24106#pullrequestreview-1499782284 - [ ] calculate USB strings at compile time for flash savings - [x] https://github.com/ArduPilot/ardupilot/pull/13760 - [ ] pre-gen lua mavlink on firmware server - [ ] we should scale baro height process noise with pressure altitude - [ ] CANFD incorrect timing, giving bus off errors - [ ] add tcp option for support.ardupilot.org - [ ] lane switch add delay till all lanes have fused, or ensure consistent for some time period (eg. 50ms) - [ ] EK3 gate mod: https://github.com/priseborough/ardupilot/commits/pr-ekf3-gps-velpos-igate-mod - [ ] make stabilize mode use proper rate control - [ ] AUTOTUNE needs to reset SMAX to 0 during twitch - [ ] possible problem with disconnected RC on H16 - [ ] resting voltage can be very bad - [ ] quadplane precland - [ ] fix i2c probing of LEDs - [ ] add CAN pkt logging to DroneCAN gui tool and ardupilot, and log loading in gui tool - [x] possible bug in ICE restart - [ ] mavcan to multiple clients at once - [ ] can gui tool panel for secure commands - [ ] add rate limited filter to airspeed to prevent large spike from corrupting airspeed - [x] default TECS_LAND_ARSPD to mid-point of cruise and min airspeed - [ ] propogate Dmod up to angle loop - [x] look at using -g -O2 for stable builds for better crash dump analysis - [ ] ATT.DesPitch and ATT.Pitch need to use the same pitch reference (ie. TRIM_PITCH_CD) - [ ] motor_lost_index never reset and not exposed in lua - [x] work out why 2048 byte reads in #23455 failed - [x] allow clear mission when disarmed in AUTO ? - [ ] add waf docs target? - [x] possible bug in RTSCTS? - [ ] Q_M_PWM_TYPE set in defaults.parm in ROMFS doesn't work for DS150 - [ ] GSF yaw errors: https://github.com/ArduPilot/ardupilot/issues/23224 - [x] mission on sdcard - [ ] more flexible M10 config: https://www.rcgroups.com/forums/showpost.php?p=50442153&postcount=8212 - [x] fix pitch limit in FBWA for transition: https://github.com/ArduPilot/ardupilot/pull/22730 - [ ] after a bounce off the ground, PIQA.I can peg high (seen in Alia model) - [ ] switching to RTL when in landing sequence to cope with VTOL motor start fail doesn't change to fw mode - [ ] ARSPD_TUBE_ORDER=3 to auto-detect order - [ ] MS4525 probe all buses not working in 4.3 after update from 4.2 - [ ] rudder arming causes yaw in AUTO takeoff #22665 - [ ] VTOL approach can turn overshoot if WP_LOITER_RAD is small - [ ] COMPASS_DIA_X of zero not treated as 1.0 #22666 - [x] level cal not clearing 3d accel cal needed msg? - [ ] CubeOrangePlus param diff BAT*PIN doesn't show changes - [ ] not using full throttle in non-airspeed takeoff: https://github.com/ArduPilot/ardupilot/issues/22572 - [ ] random voltages with voltage pin -1 - [ ] large over-tune can cause VTOL controller to climb-away, possibly lower default SMAX? - [x] with RTL autoland: Mode change to AUTO denied, in fence recovery - [x] MS5607 sub for MS5611 for Pixhawk1 Marco - [ ] annoying msg Cannot calibrate with Q_TRIM_PITCH set - [ ] not fully resetting tdrag takeoff state on new takeoff - [ ] ICE idle governor in Q modes while disarmed - [ ] Camera gimbal settings seem to be gone from QGC with Plane 4.3. ? (from fredrikfalkman) - [x] receive DO_AUX_FUNCTION in lua scripts - [ ] need better BVLOS advice and testing: https://github.com/ArduPilot/ardupilot/issues/21876 - [ ] throttle slew limit when re-starting engine on RPM outage - [ ] reduce XY gains when rate gains activate Dmod? - [ ] incorrect CRSFv2 detection: 2022-10-02 14:07:47.120 CRSFv2: requesting RX device info - [ ] remove loop rate dependency on power limit for fixed wing - [ ] limit integetrator buildup longer for catapult launch - [ ] allow idle governor to control ICE idle in Q modes when disarmed - [x] scale down rate PIDs during back-transiton based on airspeed? - [ ] auto-lower pos controller gains when have attitude error? - [ ] should use EKF height and vertical velocity estimate not DCM on loss of GPS when in quadplane mode - [ ] add package drop support - [ ] always allow at least 10 deg roll limit for fixed wing - [ ] add arming check for VTOL I gain <= P gain on roll/pitch - [ ] motors spin sometimes on soft reboot of HWing - [ ] test ublox fw update with passthru - [ ] before triggering Q_ASSIST_SPEED, check EKF fusion of airspeed, if not fusing, delay assist speed - [ ] add mission and fence extraction to MAVExplorer - [ ] add tailsitter tune param for P, I, D sequence - [ ] option for median filter between synthetic airspeed and dual-airspeed - [ ] re-load mission on arming in AUTO? See https://discuss.ardupilot.org/t/striver-mini-vtol-4-1-quadplane/71805/185?u=tridge - [ ] rapid switching between EKF and DCM on baro error: https://discuss.ardupilot.org/t/excessive-ekf3-dcm-switching-in-plane-4-1-6/82966/5 - [ ] look at methods of handling flash parity errors on H7, possibly using HW CRC - [ ] obey primary sensors with EK3_AFFINITY - [ ] motors spinning when they shouldn't? https://github.com/ArduPilot/ardupilot/issues/16630 - [ ] force arm bypass of logging start and fence auto-enable - [ ] need force_descend change for quadplane: #17824 - [ ] surface control while booting not working: #17966 Features for later 4.2.x releases: - [ ] sort out CAN baro ordering for plane, maybe option bit in BARO_OPTIONS, on plane default to can baro last - [ ] support rangefinder correction of AP_Terrain data, with configurable time constant

Copter

github.com/ArduPilot/ardupilot

Copter/Rover-4.4.0 issues list

opened 03:45AM - 13 Mar 23 UTC

rmackay9

DevCallTopic ReleaseAdmin

This is a list of issues discovered during Copter and Rover 4.4 testing. The ol…der [4.3 issues list can be found here](https://github.com/ArduPilot/ardupilot/issues/21711). Reports requiring investigation: - [ ] Lane switching warning (reported by Partner, [issue](https://github.com/ArduPilot/ardupilot/issues/24181)) - [ ] MSP on Matek board ([discussion](https://discuss.ardupilot.org/t/msp-problem-no-gps-comp-and-baro-data/103043)) - [ ] CSRF and Mount Siyi boot loop ([see bottom of this issue](https://github.com/ArduPilot/ardupilot/issues/23815)) - [ ] very short ELRS failsafes ([issue](https://github.com/ArduPilot/ardupilot/issues/23853), [PR](https://github.com/ArduPilot/ardupilot/pull/24170)) - [ ] endless climb with vertical bendy ruler? ([discussion](https://discuss.ardupilot.org/t/rtl-and-auto-mode-working-in-strange-mode/100132/4)) - [ ] Baro TCal not working? ([issue](https://github.com/ArduPilot/ardupilot/issues/21438)) - [ ] EKF error on small quad ([reported by MichelleR](https://github.com/ArduPilot/ardupilot/issues/23594)) Confirmed issues: - [ ] RockBlock only works with MAVProxy ([discussion](https://discuss.ardupilot.org/t/rockblock-iridium-sbd-and-mission-planner/102728), [wiki PR](https://github.com/ArduPilot/ardupilot_wiki/pull/5263)) -- Stephen Dade will raise wiki and MP/QGC issues - [ ] Gremsy ZIO zoom and focus not working? ([discussion](https://discuss.ardupilot.org/t/gremsy-zio-mavlink-commands-not-working/103080)) -- needs backport from 4.5 - [ ] GSF on Rover not working below 5m/s ([discussion](https://discuss.ardupilot.org/t/yaw-not-aligning-to-gsf-anymore-after-updating-from-4-2-3-to-4-4-0-beta1/101844/2), [related PR](https://github.com/ArduPilot/ardupilot/pull/23515), [issue](https://github.com/ArduPilot/ardupilot/issues/24183), [PR](https://github.com/ArduPilot/ardupilot/pull/24206)) - [ ] KDECAN not working ([discussion](https://discuss.ardupilot.org/t/copter-4-4-0-beta2-available-for-beta-testing/102158/11)) -- needs backport from 4.5. - [ ] users keep forgetting to set CAM1_TYPE (or CAM_TRIGG_TYPE) ([discussion](https://discuss.ardupilot.org/t/mav-cmd-set-camera-zoom-command-doesnt-work/100613/4)) - [ ] Yaapu reports battery 2 error but only one battery is installed ([discussion](https://discuss.ardupilot.org/t/copter-4-4-0-beta1-available-for-beta-testing/99941/7)) Enhancements or Issues that may not be resolved before the stable release: - [ ] Terrain alt clamping can lead to failed takeoff and flip on takeoff in Auto (reported by rmackay9) - [ ] Enable 10hz PID logging - [ ] RPLidarA2M12 not working ([discussion](https://discuss.ardupilot.org/t/rp-lidar-a3-integration-with-ardupilot/101792/11)) - [ ] Auto mode yaw changes slightly even if WP_YAW_BEHAVE = 0 ([issue](https://github.com/ArduPilot/ardupilot/issues/23782)) Resolved issues: - [x] yaw reset from low flying copter passing over bridge (Randy has logs) -- older version of AP, new versions should be a little better - [x] Request to add Custom Build Server support for beta builds ([discussion](https://discuss.ardupilot.org/t/copter-4-4-0-beta2-available-for-beta-testing/102158/7), [issue](https://github.com/ArduPilot/CustomBuild/issues/54, [PR](https://github.com/ArduPilot/CustomBuild/pull/55))) -- resolved for -beta3 - [x] Gremsy WE not working ([4.4 discussion](https://discuss.ardupilot.org/t/copter-4-4-0-beta1-available-for-beta-testing/99941/15), [4.3.7 discussion](https://discuss.ardupilot.org/t/gremsy-pixy-we-not-working-with-4-3-5/99163)) -- Gremsy software issue. Fix from Gremsy coming soon - [x] Siyi A8 ROI not working (reported by Kelly Schrock on facebook, [discussion](https://discuss.ardupilot.org/t/siyi-a8-roi-issue/102091), [PR](https://github.com/ArduPilot/ardupilot/pull/24011)) -- resolved for -beta3 - [x] MatekF405-TE-bdshot only 2 channels working (see Painless360's channel) -- user error - [x] FPV406 watchdog due to cracked SD card ([discussion](https://discuss.ardupilot.org/t/copter-4-4-0-beta1-available-for-beta-testing/99941/48)) -- no logs - [x] Mount serial gimbal param description confusion ([discussion](https://discuss.ardupilot.org/t/ip-cameras-rtsp-mavlink-support/99893/20)) -- fixed for beta3 - [x] serial pass through (for GPS) broken ([issue](https://github.com/ArduPilot/ardupilot/issues/21114), [PR](https://github.com/ArduPilot/ardupilot/pull/23888)) -- fixed in -beta2 - [x] RC loss+regain issue ([PR](https://github.com/ArduPilot/ardupilot/pull/23844)) -- fixed in -beta2 - [x] MP scales set-ekf-origin-here altitude incorrectly ([MP issue](https://github.com/ArduPilot/MissionPlanner/issues/3083)) -- fixed in MP 1.3.80 build 1.3.8522.19145 - [x] Custom build server broken for Matek405 builds ([discussion](https://discuss.ardupilot.org/t/copter-4-4-0-beta1-available-for-beta-testing/99941/13)) - [x] CubeOrangePlus not booting due to early memory corruption (reported by rmackay9, investigated by Tridge, PeterB, Sid) - [x] RTL_SPEED does not work if WPNAV_SPEED adjusted (reported by lthall, [PR](https://github.com/ArduPilot/ardupilot/pull/23553)) - [x] Watchdog using CSRF ([discussion](https://discuss.ardupilot.org/t/copter-4-4-0-beta1-available-for-beta-testing/99941/18), [PR](https://github.com/ArduPilot/ardupilot/pull/23648)) -- resolved for beta2

CraigElder · July 25, 2023, 3:02am

Attendee count (max): 10

UTC1102 AP_AHRS: give clearer prearm messages by Hwurzburg · Pull Request #24243 · ArduPilot/ardupilot · GitHub

Waiting on Tridge

UTC1105 Plane:expand log metadata for QTUN by Hwurzburg · Pull Request #24308 · ArduPilot/ardupilot · GitHub

Merged

UTC 1106 AC_Fence: clarify bit 2 in FENCE_ENABLE parameter by peterbarker · Pull Request #24376 · ArduPilot/ardupilot · GitHub

Waiting on Randy

UTC 1107 Tools: add transitional firmware for HEEWING-F405 by Hwurzburg · Pull Request #24382 · ArduPilot/ardupilot · GitHub

Now on the Firmware.ArduPilot.org