Attendee count (max): 21
UTC2302 - https://github.com/ArduPilot/ardupilot_wiki/pull/3702/files
- Adding documentation on parameter conversion removal
- Want the created date, not the expiration date
- Number of versions + date?
- Don’t have the information at time of writing to determine when it should be removed
- Number of versions + date?
- Dump to a file instead of stdio
- Dump just after system initialisation
- Still based on the #ifdef
UTC2312 - https://github.com/ArduPilot/ardupilot/pull/18044
- RPM some TLC
- MergeOnCIPass
UTC2319 - https://github.com/ArduPilot/mavlink/pull/224
- Log MCU information
- min/max/avg voltage
- Need to make temperature signed
UTC2325 - https://github.com/ArduPilot/mavlink/pull/223
- More messages for us to pass through
- No evaluation of the actual content of the messages
- But we need to route them
- Merged!
UTC2327 - https://github.com/ArduPilot/ardupilot/pull/18390
- Move mavlink master forward
- Out-of-date
UTC2329 - https://github.com/ArduPilot/ardupilot/pull/18416
- Fixes 65ms pauses
- Problem in ChibiOS
- Could notionally cause a 4200s delay
- Extremely rare, you’d need to be incredibly unlucky
- Will be in next round of betas/rcs
- Minimal fix / better fix will come later
- Leonard’s paranoia internal_error found this one for us
- Not the problem he was actually trying to find
- How does this happen?
- 16 bit timers wrap every 65ms
- If you sleep on that wrap for a very short period of time the free-running timer might get out-of-sync with internal data structures in ChibiOS.
- The 10us is time for linked lists to be updated
- 2us is not enough
- Change our min-delta back to 2 once the other fix comes in
UTC2336 - https://github.com/ArduPilot/ardupilot/pull/10966
- Copter-tailsitter
- Needs to fly before being merged
- Work on better transition support is welcomed
UTC2337 - https://github.com/ArduPilot/ardupilot/pull/18258
- Add enable flags to some parameters
- Merged
UTC2339 - https://github.com/ArduPilot/ardupilot/pull/18333
- Check all GPSs for health in arming checks
- Tells you which GPSs are bad
- Do health check first
- Checking home should be done separately or we say bad fix
UTC2347 - https://github.com/ArduPilot/ardupilot/pull/18338
- Remove Compass calibration start/stop on sticks
- Radevs don’t use these
- But they’re not all users
- Don’t need to calibrate compasses every time you fly!
- Only when you change the vehicle
- Does Solex do compasscal?
- Yes
UTC2351 - https://github.com/ArduPilot/ardupilot/pull/18349
- Baro temperature adjustment update
- SITL fixes
UTC2355 - https://github.com/ArduPilot/ardupilot/pull/18363
- MS5525 fix result based on temperature
- Float vs int64_t?
- Tridge made a change like that
- Signed vs unsigned?
- Losing the negative case somehow
- Might be overflowing…
- Need to test this on an actual ms5525 when it is cold
UTC0003 - https://github.com/ArduPilot/ardupilot/pull/18369
- Product names in code not good
- Should already find PERIPH in the hwdef.dat
- H757 change is just because a bad pdf extraction
UTC0009 - https://github.com/ArduPilot/ardupilot/pull/18371
- New LUA script to aid switching between GPS and OF
- Code changes to provide more innovations
- MergeOnCIPass
UTC0014 - https://github.com/ArduPilot/ardupilot/pull/18375
- H-wing quad-x pop-up issues fixed
- Should we split out the tailsitter commit separately?
- For 4.1?
- Probably not
- Min fix for 4.1.0
- Another for 4.1.1
- PH will test all of this properly
UTC0017 - https://github.com/ArduPilot/ardupilot/pull/18389/files
- Fails compass calibration start if no compasses
UTC0019 - https://github.com/ArduPilot/ardupilot/pull/18400/files
- Move parameters up and down
- Should calculate everything once/loop
- Merged
UTC0023 - https://github.com/ArduPilot/ardupilot/pull/18401
- Reserve serial ID for codevESC
- Merged
UTC0024 - https://github.com/ArduPilot/ardupilot/pull/18404/files
- Unit testing for SITL
- Having SITL die on a NaN?
- It is settable?
- Not for the internal_error
- It is settable?
- Peter will have a closer lookg this-afternoon
UTC2337 - https://github.com/ArduPilot/ardupilot/pull/18413
- Deny arming in some q-modes
- Merged!
UTC2339 - https://github.com/ArduPilot/ardupilot/issues/15941
- Plane update
- Some interesting logs have come in
- Noting disastrous
- 65ms fix to go in
- And perhaps some tailsitter changes
- Might have to wait for 4.1.1
- .1s have traditionally come along within a week or two
UTC2341 - https://github.com/ArduPilot/ardupilot/issues/16478
- Copter update
- Couple of new issues
- KDECAN unreliable with >2 motors
- Motortest spins motors 2 and 3?!
- Acro mode loses control at zero throttle even in airmode
- Airmode spools to zero throttle?
- Pre-existing?
- NMEA yaw drift issues
- Replay log needed
- Unsure what the actual problem is…
- Not fusing the yaw?
- Surface tracking issue…
- BAT_ARM_VOLT not working?
- Logs look OK to Randy
- Circle mode not responding to circle radius parameter…
- Partners relying on this behaviour
- KDECAN unreliable with >2 motors
- New beta or rc on Thursday
- TradHeli can now take off in guided mode!
- PositionControl has gained several little tweaks and checks that should go into 4.1
UTC2352 - TradHeli update
- Autotune alpha version (ff and angle-p tuning) has been out for a while
- BG got a hold of a nice simulation he was able to integrate with his SITL
- Rate-p and rate-d tuning coming soon
- We may be able to predict rate-p and/or angle-p
UTC2356 - Rover update
- https://github.com/ArduPilot/ardupilot/issues/17116
- Mowers give us great feedback!
- Reopened some issues
- GPS-save-config not saving everything?!
- PRX on 1MB boards….
- Don’t want it on 1MB Copters but do want it on 1MB Rovers…
UTC2358 - GSoC update
- Finishes this week
- Rishabh will post later this week
- Will has published his article
- GSoC 2021 - Custom Firmware Builder
- Server has been up-and-running for a while
UTC2359 - which cameras should we support for OA and whatnot
- Rishabh has been playing with OAK-D which has been good
- With Realsense going away we need options to replace D455 etc
UTC0000 - https://github.com/mavlink/mavlink/pull/1674
- Additional axes for manual control
- Extensions need to understand all-zeroes stuff
- Add a flags field to indicate additional fields are present?
- Use DO_AUX_FUNCTION to set a value for a continuous aux function
- Need to worry about failsafes
UTC0020 - close