Designing external status indicators

[mehmetalp]

Hello
I’m building a ground station with mechanical gauges and led indicators. I need to extract real time data from mission planner to an arduino.
What kind of software i have to create? What programming language i must use?
Any help?
Thanks

[chip (Eric Johnston)]

Any luck?

I’m doing a project with my son and we are wanting to use a toggle switch to arm the quad/plane w/ an Arduino.

[Halim_karapinar (Halim Karapınar)]

Mehmet selam. Benzer bir proje üzerinde kafa yoruyorum bende. Senin projede gelişme var mı?

[geofrancis (GeoMuir)]

MAVLink and Arduino: step by step

MAVLink and Arduino by Juan Pedro López This is not a post on the details of MAVLink serial protocol. If you are interested on the protocol itself, you can read the fantastic post by Pedro Alburquerque: This post will be focused on my experience and practical use of MAVLink protocol on an on-board Arduino (Nano with ATmega328) that communicates with a Pixhawk flight controller (a clone one, v2.4.8). I am using the Arduino to control the lights of my drone (WS2812B leds) and the code you will…