CUAV is a flight controller manufacturer and designer. In order to let users know more about cuav flight controller products, their flight controllers are described below.
Pixhack v2: Two IMUs with built-in damping and GH1.25 interface.
Pixhack v3: Three IMUs with built-in damping and GH1.25 interface with temperature compensation control system.
CUAV v5: STM32F7 processor ，based on FMU v5 hardware design.
V5 NANO: Avilable in 2019/4. Suitable for small drones.
V5X:Using ■■■■■■■■■ pinouts standard, it can be compatible with other pix accessories. With core design, you can design different boards to connect it (note: it’s totally different hardware from cube design and can’t connect to cube), based on FMU V5.
More CUAV flight controller instructions:
They are looking for regional agents, if you are willing to contact: firstname.lastname@example.org.
They are working hard to add more people to ArduPilot and work hard.
Check out their localized ArduPilot wiki:
Finally, watch the Internet drones based on ArduPilot.