Hello @ZeusEx ! I am trying to connect the RX6R to the BeagleBone Blue. I’ve read the thread and tried to connect the S.Port to TxD and SBUS to RxD with power coming from 3V3 and GND in UART 1. I’ve tried 5 volts, connecting it to Pin 4 E4, and pretty much every combination and still get a
PreArm Error: RC Not Found
What do you suggest I can do to connect the receiver to the board?
If you need the service file, kernel config, or any other photos or visual aids, please let me know as I recall want to get this thing flying again!
It is running 5.10-LTS and I used the BeagleBone Setup Guide to help me setup Ardupilot.