Channel 5 does not change the flight mode!

Hi,

I calibrated rc transmitter reciever on mission planner my pwms: low is 960 and high is 1960 on channel 5. Two states. But it does not read the pwm on the flight modes tab. Chaning channel 5 switch does not change flight mode. what could be the problem? I am using apm 2.8.

The apm 2.8 is too old to be recognized by the new mission planner, the modes are actually changing but you don’t see in that page, although you can see it change in the main HUD of mission planner!

Thanks for the answer this solved my problem.

1 Like