AJack
(Jack)
February 14, 2021, 11:25am
1
Using tbs micro and apsync , not able to get parameters on both of them. I can see the sensors and telemetry but no Parameters are downloaded. Please share your sr config and MP also for a working system. Thank you!
Probably a TBS micro bug. please post your parameter file
AJack
(Jack)
February 15, 2021, 1:19pm
3
setup1.param (20.7 KB)
here it is, although same setup i s working fine on copter. same issues with apsync. therefore i would not blame tbs.
Thanks!
Allister
(Allister Schreiber)
February 16, 2021, 12:03am
4
I don’t know if this similar enough to what you’re doing or if it will help, but here’s what I had to do to get it to work for me.
This isn’t field tested, but I’m declaring a win!
I have Yaapu telemetry working on my TX16S AND MAVLink to the Mission Planner on the laptop. I’ll share my setup info in case this helps someone else.
Matek F405-Std
Arducopter 4.1.0.dev
OpenTX2.3.11
Crossfire 4.10 beta on Micro TX V2 and RX Nano.
The laptop is connected directly to the Micro TX WiFi access point. I am not using a hotspot or any extra hardware. I’m hoping this will make it practical in the field. Yes, you need to restar…
AJack
(Jack)
February 16, 2021, 1:15am
5
Thank you! i do not belive it is a TBS related problem , same thing is happening with a CC. Have telemetry just no params.