Arming without LED button

KG_Fairbarn · June 26, 2018, 1:29pm

Not sure what’s going on. I had my Aux Ch7 switch setup for Arm/Disarm and it does Arm/Disarm, as does the GUI switch but only the LED button will actually Arm/Disarm initially then the GUI and RC Tx will Arm/Disarm.

Arming Check is set to 0
Arming Required is set to 1

rmackay9 · June 28, 2018, 5:51am

KG,

I’m not sure I understand fully but perhaps setting the BRD_SAFETY_ENABLE to 0 will help. That will remove the need to push the button on the safety switch.