I have a Arducopter APM 2.8 with built in compass and when i connected it with my pc and mission planner first it successfully recognized by pc then later on in my arducopter there is only green light of gps module glowing and when i click connect there is no light beeping on left side of reset only the gps green is glowing and red is bleeping an after the time limit of 30 seconds in mission planer the blue light starts beeping so i don’t know what the problem someone says that the regulator is burn and someone says that you need to reset it so i don’t know what the problem so please help me to resolve my problem
The problem here is no one has these Flight Controllers so the opportunity for help is vanishingly small.
You should really replace it with a supported one.
1 Like