Ok I checked with 4.5.1…
with MNT1_RC_RATE: 0
I can control the PAN of the gimbal (In 4.4.4 in PAN gimbal always backs to oryginal position)
Follow the PAN also works.
RC11_OPTION:163 and Herelink CAM short press set to ch11 default: 1000 Active Value: 2000 moves the gimbal in PAN to the right around 30 degrees. This option doesn’t change “Mount lock” Follow always on.
Gimbal moves are to fast I tried to slow them in gimbal parameters but that doesn’t help
with MNT1_RC_RATE:60
I can control the movement of the PAN and TILT precisely but gimbal is always in “Lock” mode I can’t force it to “Follow” mode in PAN or TILT. Rx_OPTION:163 doesn’t work, doesn’t change anything.