Add new problem Github

[JDANILOM (José Danilo Martins da Silva)]

@rmackay9 Please, could you add once new problem related us topics below.

Opened by me

Throttle not responding (After installation Hereflow)

I have came around the same problem described here: Please read it to see if it is the same behavior. I haven’t found any solution yet.

Opened by Nautics

EKF3,Optical flow and GPS behavior

Hello to all, I have set up a copter with orange cube, hereflow, Here2 gps and tfmini plus lidar (firmware, copter 4.3.3) I am struggling to understand the fusion behavior. By setting per wiki for regular flight Verify that EK3_ENABLE = 1, enabling EKF3 Set AHRS_EKF_TYPE = 3 to use EKF3 Set EK3_SRC_OPTIONS = 0 to disable FuseAllVelocities Set EK3_FLOW_DELAY depending on your optical flow sensor Set EK3_SRC1_POSXY = 3 (Primary horizontal position from GPS, set this to 0 to only …

Both are related to the same issue with Hereflow and Rangefinder.

[rmackay9]

Hi @JDANILOM,

I’ve responded here and raised this Wiki issue.

Thanks for the report and sorry for not responding more quickly.