Recommendation for a "complete kit" to build an Ardupilot based autonomous fixed wing vehicle?

[Tristan_Redish]

So the Hawks Work stuff is interesting, at least it has some kind of support and in kit form its quite complete.

But its a complete kit of “Parts to avoid” as per this thread.

Hardware To Avoid When Building Your First Multirotor

Hobbyists new to Arducopter, or Ardupilot in general, often make the mistake of starting out with sub-par hardware which in the best case causes frustration and in the worst case actually costs them more in the long run when expectations are not met and the hardware has to be replaced. So, the following is a suggested list of hardware to avoid. I realize cost is often a driving factor or limitation but this is not considering that, simply performance. Flight Controllers: The APM flight control…

Could someone make it work? Sure but without previous experience you may encounter lots of growing pains.

Another option would be a inexpensive frame and a basic F405 controller.