Setting top to : /home/maxbuzz/repos/github/ArduPilot/ardupilot Setting out to : /home/maxbuzz/repos/github/ArduPilot/ardupilot/build Autoconfiguration : enabled Checking for program 'python' : /usr/lib/python-exec/python3.11/python3 Checking for python version >= 3.6.9 : 3.11.7 Setting board to : FlywooF405S-AIO Using toolchain : arm-none-eabi Checking for 'g++' (C++ compiler) : /usr/bin/arm-none-eabi-g++ Checking for 'gcc' (C compiler) : /usr/bin/arm-none-eabi-gcc Checking for c flags '-MMD' : yes Checking for cxx flags '-MMD' : yes CXX Compiler : g++ 13.2.1 Checking for program 'make' : /usr/bin/make Checking for program 'arm-none-eabi-objcopy' : /usr/bin/arm-none-eabi-objcopy Including /home/maxbuzz/repos/github/ArduPilot/ardupilot/libraries/AP_HAL_ChibiOS/hwdef/include/minimize_fpv_osd.inc Including /home/maxbuzz/repos/github/ArduPilot/ardupilot/libraries/AP_HAL_ChibiOS/hwdef/include/minimize_common.inc Removing HAL_MSP_GPS_ENABLED Setup for MCU STM32F405xx Default parameters path from hwdef: /home/maxbuzz/repos/github/ArduPilot/ardupilot/libraries/AP_HAL_ChibiOS/hwdef/FlywooF405S-AIO/defaults.parm Writing hwdef setup in /home/maxbuzz/repos/github/ArduPilot/ardupilot/build/FlywooF405S-AIO/hwdef.h Writing DMA map Sharing channel (1, 2) for TIM3_UP TIM3_CH4 Sharing channel (1, 7) for TIM2_UP TIM2_CH4 Setting up as normal Generating ldscript.ld Checking for env.py env set ENABLE_DFU_BOOT=0 env set PROCESS_STACK=0x1C00 env set MAIN_STACK=0x600 env set IOMCU_FW=0 env set PERIPH_FW=0 env set BOARD_FLASH_SIZE=1024 env set EXT_FLASH_SIZE_MB=0 env set INT_FLASH_PRIMARY=False env set ENABLE_CRASHDUMP=False env set CPU_FLAGS=['-mcpu=cortex-m4', '-mfpu=fpv4-sp-d16', '-mfloat-abi=hard', '-DARM_MATH_CM4', '-u_printf_float'] env set CORTEX=cortex-m4 env set APJ_BOARD_ID=1099 env set APJ_BOARD_TYPE=STM32F405xx env set USBID=0x1209/0x5741 env set FLASH_RESERVE_START_KB=48 env set EXT_FLASH_RESERVE_START_KB=0 env set FLASH_TOTAL=999424 env set HAS_EXTERNAL_FLASH_SECTIONS=0 env set CHIBIOS_BUILD_FLAGS=USE_FATFS=no CHIBIOS_STARTUP_MK=os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk CHIBIOS_PLATFORM_MK=os/hal/ports/STM32/STM32F4xx/platform.mk MCU=cortex-m4 ENV_UDEFS=-DCHPRINTF_USE_FLOAT=1 Enabling ChibiOS asserts : no Disabling Watchdog : no Enabling malloc guard : no Enabling ChibiOS thread statistics : no Enabling -Werror : no Checking for intelhex module: : disabled Enabled OpenDroneID : no Enabled firmware ID checking : no GPS Debug Logging : no Enabled custom controller : no Checking for HAVE_CMATH_ISFINITE : yes Checking for HAVE_CMATH_ISINF : yes Checking for HAVE_CMATH_ISNAN : yes Checking for NEED_CMATH_ISFINITE_STD_NAMESPACE : yes Checking for NEED_CMATH_ISINF_STD_NAMESPACE : yes Checking for NEED_CMATH_ISNAN_STD_NAMESPACE : yes Checking for header endian.h : not found Checking for header byteswap.h : not found Checking for HAVE_MEMRCHR : no Configured VSCode Intellisense: : no DC_DSDL compiler : /home/maxbuzz/repos/github/ArduPilot/ardupilot/modules/DroneCAN/dronecan_dsdlc/dronecan_dsdlc.py Source is git repository : yes Update submodules : yes Checking for program 'git' : /usr/bin/git Gtest : STM32 boards currently don't support compiling gtest Checking for program 'arm-none-eabi-size' : /usr/bin/arm-none-eabi-size Benchmarks : disabled Unit tests : disabled Scripting : maybe Scripting runtime checks : enabled Debug build : disabled Coverage build : disabled Force 32-bit build : disabled Checking for program 'rsync' : /usr/bin/rsync 'configure' finished successfully (1.580s)