[projectConfiguration]
1\cycle_checkBox_statu=1
1\linetext="$PAIR864,0,0,460800*16" ; Set baud rate to 460800.
1\hex_checkBox_statu=0
1\checkBox_CRLF_statu=1
1\delayTime_linetext=100
2\cycle_checkBox_statu=1
2\linetext="$PAIR003*39" ; Power off the GNSS system, including DSP, RF, PE and clock.
2\hex_checkBox_statu=0
2\checkBox_CRLF_statu=1
2\delayTime_linetext=100
3\cycle_checkBox_statu=1
3\linetext="$PAIR512*3C" ; Clear all data.
3\hex_checkBox_statu=0
3\checkBox_CRLF_statu=1
3\delayTime_linetext=500
4\cycle_checkBox_statu=1
4\linetext="$PQTMRESTOREPAR*13" ; Restore parameters configured by all commands to their default values.
4\hex_checkBox_statu=0
4\checkBox_CRLF_statu=1
4\delayTime_linetext=500
5\cycle_checkBox_statu=1
5\linetext="$PAIR514*3A" ; Clear the current configuration and restore the default settings.
5\hex_checkBox_statu=0
5\checkBox_CRLF_statu=1
5\delayTime_linetext=500
6\cycle_checkBox_statu=1
6\linetext="$PAIR513*3D" ; Save the current configurations from RTC RAM to NVM.
6\hex_checkBox_statu=0
6\checkBox_CRLF_statu=1
6\delayTime_linetext=500
7\cycle_checkBox_statu=1
7\linetext="$PAIR023*3B" ; Reboot.
7\hex_checkBox_statu=0
7\checkBox_CRLF_statu=1
7\delayTime_linetext=2000
8\cycle_checkBox_statu=1
8\linetext="$PQTMGNSSSTOP*09" ; Stop GNSS engine.
8\hex_checkBox_statu=0
8\checkBox_CRLF_statu=1
8\delayTime_linetext=100
9\cycle_checkBox_statu=1
9\linetext="$PAIR007*3D" ; Perform a cold start and clear system/user configurations.
9\hex_checkBox_statu=0
9\checkBox_CRLF_statu=1
9\delayTime_linetext=2000
10\cycle_checkBox_statu=1
10\linetext="$PAIR023*3B" ; Reboot.
10\hex_checkBox_statu=0
10\checkBox_CRLF_statu=1
10\delayTime_linetext=2000
11\cycle_checkBox_statu=1
11\linetext="$PQTMGNSSSTOP*09" ; Stop GNSS engine.
11\hex_checkBox_statu=0
11\checkBox_CRLF_statu=1
11\delayTime_linetext=100
12\cycle_checkBox_statu=1
12\linetext="$PQTMCFGRCVRMODE,W,1*2A" ; Set Rover mode.
12\hex_checkBox_statu=0
12\checkBox_CRLF_statu=1
12\delayTime_linetext=100
13\cycle_checkBox_statu=1
13\linetext="$PAIR062,0,1*3F" ; Enable GGA sentence.
13\hex_checkBox_statu=0
13\checkBox_CRLF_statu=1
13\delayTime_linetext=100
14\cycle_checkBox_statu=1
14\linetext="$PAIR062,1,0*3F" ; Disable GLL sentence.
14\hex_checkBox_statu=0
14\checkBox_CRLF_statu=1
14\delayTime_linetext=100
15\cycle_checkBox_statu=1
15\linetext="$PAIR062,2,0*3C" ; Disable GSA sentence.
15\hex_checkBox_statu=0
15\checkBox_CRLF_statu=1
15\delayTime_linetext=100
16\cycle_checkBox_statu=1
16\linetext="$PAIR062,3,0*3D" ; Disable GSV sentence
16\hex_checkBox_statu=0
16\checkBox_CRLF_statu=1
16\delayTime_linetext=100
17\cycle_checkBox_statu=1
17\linetext="$PAIR062,4,1*3B" ; Enable RMC sentence.
17\hex_checkBox_statu=0
17\checkBox_CRLF_statu=1
17\delayTime_linetext=100
18\cycle_checkBox_statu=1
18\linetext="$PAIR062,5,1*3A" ; Enable VTG sentence.
18\hex_checkBox_statu=0
18\checkBox_CRLF_statu=1
18\delayTime_linetext=100
19\cycle_checkBox_statu=1
19\linetext="$PAIR063,-1*0F" ; Query output rate of NMEA sentences (response: $PAIR063,-1,1,0,0,0,1,1*0E).
19\hex_checkBox_statu=0
19\checkBox_CRLF_statu=1
19\delayTime_linetext=100
20\cycle_checkBox_statu=1
20\linetext="$PAIR050,200*21" ; Set position fix interval to 5Hz (200ms).
20\hex_checkBox_statu=0
20\checkBox_CRLF_statu=1
20\delayTime_linetext=100
21\cycle_checkBox_statu=1
21\linetext="$PQTMCFGNMEADP,W,3,8,3,3,3,3*39" ; Max decimal places (3 for all but lat/lng, which is 8).
21\hex_checkBox_statu=0
21\checkBox_CRLF_statu=1
21\delayTime_linetext=100
22\cycle_checkBox_statu=1
22\linetext="$PAIR862,0,0,37*1E" ; Set GNSS port data type configuration to nmea+command in & out only (undocumented feature?).
22\hex_checkBox_statu=0
22\checkBox_CRLF_statu=1
22\delayTime_linetext=100
23\cycle_checkBox_statu=1
23\linetext="$PAIR058,35*1D" ; Sets the minimum SNR to 35. Try setting 15 if necessary ($PAIR058,15*1F).
23\hex_checkBox_statu=0
23\checkBox_CRLF_statu=1
23\delayTime_linetext=100
24\cycle_checkBox_statu=1
24\linetext="$PAIR070,1*20" ; Sets the static navigation speed threshold to 1dm/s (0.1m/s).
24\hex_checkBox_statu=0
24\checkBox_CRLF_statu=1
24\delayTime_linetext=100
25\cycle_checkBox_statu=1
25\linetext="$PAIR072,15*17" ; Set satellite elevation mask to 15 deg.
25\hex_checkBox_statu=0
25\checkBox_CRLF_statu=1
25\delayTime_linetext=100
26\cycle_checkBox_statu=1
26\linetext="$PAIR074,1*24" ; Enable active interference cancellation (AIC) function.
26\hex_checkBox_statu=0
26\checkBox_CRLF_statu=1
26\delayTime_linetext=100
27\cycle_checkBox_statu=1
27\linetext="$PAIR080,0*2E" ; Set navigation mode = normal (mode 0).
27\hex_checkBox_statu=0
27\checkBox_CRLF_statu=1
27\delayTime_linetext=100
28\cycle_checkBox_statu=1
28\linetext="$PAIR391,1*2C" ; Enable jamming detection.
28\hex_checkBox_statu=0
28\checkBox_CRLF_statu=1
28\delayTime_linetext=100
29\cycle_checkBox_statu=1
29\linetext="$PAIR400,1*23" ; Set RTCM correction source.
29\hex_checkBox_statu=0
29\checkBox_CRLF_statu=1
29\delayTime_linetext=100
30\cycle_checkBox_statu=1
30\linetext="$PAIR473,1*27" ; Enable EPO data aiding & limits saving the flash range to 80K (undocumented feature?).
30\hex_checkBox_statu=0
30\checkBox_CRLF_statu=1
30\delayTime_linetext=100
31\cycle_checkBox_statu=1
31\linetext="$PAIR092,0*2D" ; Set non-static mode (undocumented feature?).
31\hex_checkBox_statu=0
31\checkBox_CRLF_statu=1
31\delayTime_linetext=100
32\cycle_checkBox_statu=1
32\linetext="$PAIR753,1*26" ; Enhance PPS timing accuracy (undocumented feature?).
32\hex_checkBox_statu=0
32\checkBox_CRLF_statu=1
32\delayTime_linetext=100
33\cycle_checkBox_statu=1
33\linetext="$PAIR513*3D" ; Save current configurations from RTC RAM to NVM.
33\hex_checkBox_statu=0
33\checkBox_CRLF_statu=1
33\delayTime_linetext=500
34\cycle_checkBox_statu=1
34\linetext="$PQTMSAVEPAR*5A" ; Save configurations into NVM.
34\hex_checkBox_statu=0
34\checkBox_CRLF_statu=1
34\delayTime_linetext=500
35\cycle_checkBox_statu=1
35\linetext="$PAIR023*3B" ; Reboot.
35\hex_checkBox_statu=0
35\checkBox_CRLF_statu=1
35\delayTime_linetext=300000
size=35