13:14:34 **** Build of configuration Default for project ArduCopter ****
make px4-v2-upload 
// BUILDROOT=/c/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter HAL_BOARD=HAL_BOARD_PX4 HAL_BOARD_SUBTYPE= TOOLCHAIN=NATIVE EXTRAFLAGS=-DGIT_VERSION="1f477c2e" -I/c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Common/missing -DMAVLINK_PROTOCOL_VERSION=2 -DNUTTX_GIT_VERSION="be6ff61a" -DPX4_GIT_VERSION="3df5644c" -DUAVCAN=1 -D__STDC_FORMAT_MACROS -DHAVE_STD_NULLPTR_T=0 -DHAVE_ENDIAN_H=0 -DHAVE_BYTESWAP_H=0 -DHAVE_OCLOEXEC=0 -I/c/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink
Checking modules
echo "Generating MAVLink headers..."
Generating MAVLink headers...
#goto mavlink module directory and run the most recent generator script
echo "Generating C code using mavgen.py located at" /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/
Generating C code using mavgen.py located at /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/
PYTHONPATH=/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/ python /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink//pymavlink/tools/mavgen.py --lang=C --wire-protocol=2.0 --output=/c/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0 /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/message_definitions/v1.0/ardupilotmega.xml; if [ $? -le 0 -o $? -gt 128 ]; then echo "mavgen: success"; exit 0; else echo "mavgen: failed"; exit 1; fi
Validating c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/message_definitions/v1.0/ardupilotmega.xml
Parsing c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/message_definitions/v1.0/ardupilotmega.xml
Note: message DATA64 is longer than 64 bytes long (74 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message DATA96 is longer than 64 bytes long (106 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message REMOTE_LOG_DATA_BLOCK is longer than 64 bytes long (214 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message DEVICE_OP_READ_REPLY is longer than 64 bytes long (143 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message DEVICE_OP_WRITE is longer than 64 bytes long (187 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Validating c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/message_definitions/v1.0\common.xml
Parsing c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/message_definitions/v1.0\common.xml
Note: message GPS_STATUS is longer than 64 bytes long (109 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message ATTITUDE_QUATERNION_COV is longer than 64 bytes long (80 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message GLOBAL_POSITION_INT_COV is longer than 64 bytes long (189 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message LOCAL_POSITION_NED_COV is longer than 64 bytes long (233 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message HIL_ACTUATOR_CONTROLS is longer than 64 bytes long (89 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message HIGHRES_IMU is longer than 64 bytes long (70 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message HIL_SENSOR is longer than 64 bytes long (72 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message SIM_STATE is longer than 64 bytes long (92 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message FILE_TRANSFER_PROTOCOL is longer than 64 bytes long (262 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message HIL_STATE_QUATERNION is longer than 64 bytes long (72 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message LOG_DATA is longer than 64 bytes long (105 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message GPS_INJECT_DATA is longer than 64 bytes long (121 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message SERIAL_CONTROL is longer than 64 bytes long (87 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message ENCAPSULATED_DATA is longer than 64 bytes long (263 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message RESOURCE_REQUEST is longer than 64 bytes long (251 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message FOLLOW_TARGET is longer than 64 bytes long (101 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message CONTROL_SYSTEM_STATE is longer than 64 bytes long (108 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message AUTOPILOT_VERSION is longer than 64 bytes long (68 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message GPS_INPUT is longer than 64 bytes long (71 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message GPS_RTCM_DATA is longer than 64 bytes long (190 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message V2_EXTENSION is longer than 64 bytes long (262 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message CAMERA_INFORMATION is longer than 64 bytes long (94 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message CAMERA_IMAGE_CAPTURED is longer than 64 bytes long (263 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message LOGGING_DATA is longer than 64 bytes long (263 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Note: message LOGGING_DATA_ACKED is longer than 64 bytes long (263 bytes), which can cause fragmentation since many radio modems use 64 bytes as maximum air transfer unit.
Validating c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/message_definitions/v1.0\uAvionix.xml
Parsing c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/mavlink/message_definitions/v1.0\uAvionix.xml
Merged enum MAV_CMD
Found 206 MAVLink message types in 3 XML files
Generating C implementation in directory c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0\ardupilotmega
Generating C implementation in directory c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0\common
Generating C implementation in directory c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0\uAvionix
Copying fixed headers for protocol 2.0 to c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0
mavgen: success
make[1]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware'
Skipping submodules. NUTTX_SRC is set to /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4NuttX/nuttx/
%% Configuring NuttX for px4fmu-v2
%% Exporting NuttX for px4fmu-v2
LN: include/arch to arch/arm/include
LN: include/arch/board to configs/px4fmu-v2/include
LN: include/arch/chip to arch/arm/include/stm32
LN: arch/arm/src/board to configs/px4fmu-v2/src
LN: arch/arm/src/chip to arch/arm/src/stm32
LN: include/apps to ../apps/include
Register: sercon
Register: serdis
make[4]: Nothing to be done for `context'.
make[4]: Nothing to be done for `context'.
make[4]: Nothing to be done for `context'.
make[4]: Nothing to be done for `context'.
Register: sysinfo
make[5]: Nothing to be done for `context'.
make[4]: Nothing to be done for `context'.
make[4]: Nothing to be done for `context'.
make[4]: Nothing to be done for `context'.
make[4]: Nothing to be done for `context'.
make[4]: Nothing to be done for `context'.
make[4]: Nothing to be done for `context'.
CC:  os_start.c
CC:  os_bringup.c
CC:  errno_getptr.c
CC:  errno_get.c
CC:  errno_set.c
CC:  sched_garbage.c
CC:  sched_getfiles.c
CC:  sched_getsockets.c
CC:  sched_getstreams.c
CC:  prctl.c
CC:  exit.c
CC:  getpid.c
CC:  task_create.c
CC:  task_init.c
CC:  task_setup.c
CC:  task_activate.c
CC:  task_start.c
CC:  task_delete.c
CC:  task_exit.c
CC:  task_exithook.c
CC:  task_recover.c
CC:  task_restart.c
CC:  task_spawn.c
CC:  task_spawnparms.c
CC:  task_terminate.c
CC:  sched_addreadytorun.c
CC:  sched_removereadytorun.c
CC:  sched_addprioritized.c
CC:  sched_mergepending.c
CC:  sched_addblocked.c
CC:  sched_removeblocked.c
CC:  sched_free.c
CC:  sched_gettcb.c
CC:  sched_verifytcb.c
CC:  sched_releasetcb.c
CC:  task_vfork.c
CC:  group_create.c
CC:  group_join.c
CC:  group_leave.c
CC:  group_find.c
CC:  group_setupstreams.c
CC:  group_setupidlefiles.c
CC:  group_setuptaskfiles.c
CC:  task_getgroup.c
CC:  group_foreachchild.c
CC:  group_killchildren.c
CC:  group_signal.c
CC:  sched_setparam.c
CC:  sched_setpriority.c
CC:  sched_getparam.c
CC:  sched_setscheduler.c
CC:  sched_getscheduler.c
CC:  sched_yield.c
CC:  sched_rrgetinterval.c
CC:  sched_foreach.c
CC:  sched_lock.c
CC:  sched_unlock.c
CC:  sched_lockcount.c
CC:  sched_self.c
CC:  atexit.c
CC:  sched_reprioritize.c
CC:  sched_waitpid.c
CC:  wd_initialize.c
CC:  wd_create.c
CC:  wd_start.c
CC:  wd_cancel.c
CC:  wd_delete.c
CC:  wd_gettime.c
CC:  sched_processtimer.c
CC:  sleep.c
CC:  usleep.c
CC:  sem_initialize.c
CC:  sem_destroy.c
CC:  sem_open.c
CC:  sem_close.c
CC:  sem_unlink.c
CC:  sem_wait.c
CC:  sem_trywait.c
CC:  sem_timedwait.c
sem_timedwait.c: In function 'sem_timedwait':
sem_timedwait.c:226:23: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
   if (abstime->tv_sec < 0 || abstime->tv_nsec > 1000000000)
                       ^
CC:  sem_post.c
CC:  sem_findnamed.c
CC:  sem_waitirq.c
CC:  sem_holder.c
CC:  timer_initialize.c
CC:  timer_create.c
CC:  timer_delete.c
CC:  timer_getoverrun.c
CC:  timer_gettime.c
CC:  timer_settime.c
timer_settime.c:70:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
 static void inline timer_sigqueue(FAR struct posix_timer_s *timer);
 ^
timer_settime.c:71:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
 static void inline timer_restart(FAR struct posix_timer_s *timer, uint32_t itimer);
 ^
timer_settime.c:96:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
 static void inline timer_sigqueue(FAR struct posix_timer_s *timer)
 ^
timer_settime.c:136:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
 static void inline timer_restart(FAR struct posix_timer_s *timer, uint32_t itimer)
 ^
CC:  timer_release.c
CC:  irq_initialize.c
CC:  irq_attach.c
CC:  irq_dispatch.c
CC:  irq_unexpectedisr.c
CC:  clock_initialize.c
CC:  clock_settime.c
CC:  clock_gettime.c
CC:  clock_getres.c
CC:  clock_time2ticks.c
CC:  clock_abstime2ticks.c
CC:  clock_ticks2time.c
CC:  clock_gettimeofday.c
CC:  clock_systimer.c
CC:  pthread_create.c
CC:  pthread_exit.c
CC:  pthread_join.c
CC:  pthread_detach.c
CC:  pthread_yield.c
CC:  pthread_getschedparam.c
CC:  pthread_setschedparam.c
CC:  pthread_mutexinit.c
CC:  pthread_mutexdestroy.c
CC:  pthread_mutexlock.c
CC:  pthread_mutextrylock.c
CC:  pthread_mutexunlock.c
CC:  pthread_condinit.c
CC:  pthread_conddestroy.c
CC:  pthread_condwait.c
CC:  pthread_condsignal.c
CC:  pthread_condbroadcast.c
CC:  pthread_barrierinit.c
CC:  pthread_barrierdestroy.c
CC:  pthread_barrierwait.c
CC:  pthread_cancel.c
CC:  pthread_setcancelstate.c
CC:  pthread_keycreate.c
CC:  pthread_setspecific.c
CC:  pthread_getspecific.c
CC:  pthread_keydelete.c
CC:  pthread_initialize.c
CC:  pthread_completejoin.c
CC:  pthread_findjoininfo.c
CC:  pthread_once.c
CC:  pthread_release.c
CC:  pthread_setschedprio.c
CC:  pthread_condtimedwait.c
CC:  pthread_kill.c
CC:  pthread_sigmask.c
CC:  sig_initialize.c
CC:  sig_action.c
CC:  sig_procmask.c
CC:  sig_pending.c
CC:  sig_suspend.c
CC:  sig_kill.c
CC:  sig_queue.c
CC:  sig_waitinfo.c
CC:  sig_timedwait.c
CC:  sig_findaction.c
CC:  sig_allocatependingsigaction.c
CC:  sig_releasependingsigaction.c
CC:  sig_unmaskpendingsignal.c
CC:  sig_removependingsignal.c
CC:  sig_releasependingsignal.c
CC:  sig_lowest.c
CC:  sig_mqnotempty.c
CC:  sig_cleanup.c
CC:  sig_dispatch.c
CC:  sig_deliver.c
CC:  pause.c
CC:  mq_open.c
CC:  mq_close.c
CC:  mq_unlink.c
CC:  mq_send.c
CC:  mq_timedsend.c
mq_timedsend.c: In function 'mq_timedsend':
mq_timedsend.c:202:35: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
   if (!abstime || abstime->tv_sec < 0 || abstime->tv_nsec > 1000000000)
                                   ^
CC:  mq_sndinternal.c
CC:  mq_receive.c
CC:  mq_timedreceive.c
mq_timedreceive.c: In function 'mq_timedreceive':
mq_timedreceive.c:201:35: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
   if (!abstime || abstime->tv_sec < 0 || abstime->tv_nsec > 1000000000)
                                   ^
CC:  mq_rcvinternal.c
CC:  mq_initialize.c
CC:  mq_descreate.c
CC:  mq_findnamed.c
CC:  mq_msgfree.c
CC:  mq_msgqfree.c
CC:  mq_release.c
CC:  mq_recover.c
CC:  mq_waitirq.c
CC:  mq_notify.c
CC:  env_getenvironptr.c
CC:  env_dup.c
CC:  env_release.c
CC:  env_findvar.c
CC:  env_removevar.c
CC:  env_clearenv.c
CC:  env_getenv.c
CC:  env_putenv.c
CC:  env_setenv.c
CC:  env_unsetenv.c
AR:   os_start.o os_bringup.o errno_getptr.o errno_get.o errno_set.o sched_garbage.o sched_getfiles.o sched_getsockets.o sched_getstreams.o prctl.o exit.o getpid.o task_create.o task_init.o task_setup.o task_activate.o task_start.o task_delete.o task_exit.o task_exithook.o task_recover.o task_restart.o task_spawn.o task_spawnparms.o task_terminate.o sched_addreadytorun.o sched_removereadytorun.o sched_addprioritized.o sched_mergepending.o sched_addblocked.o sched_removeblocked.o sched_free.o sched_gettcb.o sched_verifytcb.o sched_releasetcb.o task_vfork.o group_create.o group_join.o group_leave.o group_find.o group_setupstreams.o group_setupidlefiles.o group_setuptaskfiles.o task_getgroup.o group_foreachchild.o group_killchildren.o group_signal.o sched_setparam.o sched_setpriority.o sched_getparam.o sched_setscheduler.o sched_getscheduler.o sched_yield.o sched_rrgetinterval.o sched_foreach.o sched_lock.o sched_unlock.o sched_lockcount.o sched_self.o atexit.o sched_reprioritize.o sched_waitpid.o wd_initialize.o wd_create.o wd_start.o wd_cancel.o wd_delete.o wd_gettime.o sched_processtimer.o sleep.o usleep.o sem_initialize.o sem_destroy.o sem_open.o sem_close.o sem_unlink.o sem_wait.o sem_trywait.o sem_timedwait.o sem_post.o sem_findnamed.o sem_waitirq.o sem_holder.o timer_initialize.o timer_create.o timer_delete.o timer_getoverrun.o timer_gettime.o timer_settime.o timer_release.o irq_initialize.o irq_attach.o irq_dispatch.o irq_unexpectedisr.o clock_initialize.o clock_settime.o clock_gettime.o clock_getres.o clock_time2ticks.o clock_abstime2ticks.o clock_ticks2time.o clock_gettimeofday.o clock_systimer.o pthread_create.o pthread_exit.o pthread_join.o pthread_detach.o pthread_yield.o pthread_getschedparam.o pthread_setschedparam.o pthread_mutexinit.o pthread_mutexdestroy.o pthread_mutexlock.o pthread_mutextrylock.o pthread_mutexunlock.o pthread_condinit.o pthread_conddestroy.o pthread_condwait.o pthread_condsignal.o pthread_condbroadcast.o pthread_barrierinit.o pthread_barrierdestroy.o pthread_barrierwait.o pthread_cancel.o pthread_setcancelstate.o pthread_keycreate.o pthread_setspecific.o pthread_getspecific.o pthread_keydelete.o pthread_initialize.o pthread_completejoin.o pthread_findjoininfo.o pthread_once.o pthread_release.o pthread_setschedprio.o pthread_condtimedwait.o pthread_kill.o pthread_sigmask.o sig_initialize.o sig_action.o sig_procmask.o sig_pending.o sig_suspend.o sig_kill.o sig_queue.o sig_waitinfo.o sig_timedwait.o sig_findaction.o sig_allocatependingsigaction.o sig_releasependingsigaction.o sig_unmaskpendingsignal.o sig_removependingsignal.o sig_releasependingsignal.o sig_lowest.o sig_mqnotempty.o sig_cleanup.o sig_dispatch.o sig_deliver.o pause.o mq_open.o mq_close.o mq_unlink.o mq_send.o mq_timedsend.o mq_sndinternal.o mq_receive.o mq_timedreceive.o mq_rcvinternal.o mq_initialize.o mq_descreate.o mq_findnamed.o mq_msgfree.o mq_msgqfree.o mq_release.o mq_recover.o mq_waitirq.o mq_notify.o env_getenvironptr.o env_dup.o env_release.o env_findvar.o env_removevar.o env_clearenv.o env_getenv.o env_putenv.o env_setenv.o env_unsetenv.o
CC:  stdio/lib_fileno.c
CC:  stdio/lib_printf.c
CC:  stdio/lib_syslog.c
CC:  stdio/lib_lowsyslog.c
CC:  stdio/lib_sprintf.c
CC:  stdio/lib_asprintf.c
CC:  stdio/lib_snprintf.c
CC:  stdio/lib_libsprintf.c
CC:  stdio/lib_vsprintf.c
CC:  stdio/lib_avsprintf.c
CC:  stdio/lib_vsnprintf.c
CC:  stdio/lib_libvsprintf.c
In file included from stdio/lib_libvsprintf.c:230:0:
./stdio/lib_libdtoa.c: In function 'lib_dtoa':
./stdio/lib_libdtoa.c:153:13: warning: variable 'digalloc' set but not used [-Wunused-but-set-variable]
   FAR char *digalloc;   /* Copy of digits to be freed after usage */
             ^
CC:  stdio/lib_dprintf.c
CC:  stdio/lib_vdprintf.c
CC:  stdio/lib_meminstream.c
CC:  stdio/lib_memoutstream.c
CC:  stdio/lib_lowinstream.c
CC:  stdio/lib_lowoutstream.c
CC:  stdio/lib_zeroinstream.c
CC:  stdio/lib_nullinstream.c
CC:  stdio/lib_nulloutstream.c
CC:  stdio/lib_sscanf.c
CC:  stdio/lib_rawinstream.c
CC:  stdio/lib_rawoutstream.c
CC:  stdio/lib_fopen.c
CC:  stdio/lib_fclose.c
CC:  stdio/lib_fread.c
CC:  stdio/lib_libfread.c
CC:  stdio/lib_fseek.c
CC:  stdio/lib_ftell.c
CC:  stdio/lib_fsetpos.c
CC:  stdio/lib_fgetpos.c
CC:  stdio/lib_fgetc.c
CC:  stdio/lib_fgets.c
CC:  stdio/lib_gets.c
CC:  stdio/lib_fwrite.c
CC:  stdio/lib_libfwrite.c
CC:  stdio/lib_fflush.c
CC:  stdio/lib_libflushall.c
CC:  stdio/lib_libfflush.c
CC:  stdio/lib_rdflush.c
CC:  stdio/lib_wrflush.c
CC:  stdio/lib_fputc.c
CC:  stdio/lib_puts.c
CC:  stdio/lib_fputs.c
CC:  stdio/lib_ungetc.c
CC:  stdio/lib_vprintf.c
CC:  stdio/lib_fprintf.c
CC:  stdio/lib_vfprintf.c
CC:  stdio/lib_stdinstream.c
CC:  stdio/lib_stdoutstream.c
CC:  stdio/lib_perror.c
CC:  stdio/lib_feof.c
CC:  stdio/lib_ferror.c
CC:  stdio/lib_clearerr.c
CC:  stdio/lib_dtoa.c
CC:  stdio/lib_libnoflush.c
CC:  stdlib/lib_abs.c
CC:  stdlib/lib_abort.c
CC:  stdlib/lib_imaxabs.c
CC:  stdlib/lib_itoa.c
CC:  stdlib/lib_labs.c
CC:  stdlib/lib_llabs.c
CC:  stdlib/lib_rand.c
CC:  stdlib/lib_qsort.c
CC:  unistd/lib_getopt.c
CC:  unistd/lib_getoptargp.c
CC:  unistd/lib_getoptindp.c
CC:  unistd/lib_getoptoptp.c
CC:  unistd/lib_chdir.c
CC:  unistd/lib_getcwd.c
CC:  sched/sched_getprioritymax.c
CC:  sched/sched_getprioritymin.c
CC:  string/lib_checkbase.c
CC:  string/lib_isbasedigit.c
CC:  string/lib_memset.c
CC:  string/lib_memchr.c
CC:  string/lib_memccpy.c
CC:  string/lib_memcmp.c
CC:  string/lib_memmove.c
CC:  string/lib_skipspace.c
CC:  string/lib_strcasecmp.c
CC:  string/lib_strcat.c
CC:  string/lib_strchr.c
CC:  string/lib_strcpy.c
CC:  string/lib_strcmp.c
CC:  string/lib_strcspn.c
CC:  string/lib_strdup.c
CC:  string/lib_strerror.c
CC:  string/lib_strlen.c
CC:  string/lib_strnlen.c
CC:  string/lib_strncasecmp.c
CC:  string/lib_strncat.c
CC:  string/lib_strncmp.c
CC:  string/lib_strncpy.c
CC:  string/lib_strndup.c
CC:  string/lib_strcasestr.c
CC:  string/lib_strpbrk.c
CC:  string/lib_strrchr.c
CC:  string/lib_strspn.c
CC:  string/lib_strstr.c
CC:  string/lib_strtok.c
CC:  string/lib_strtokr.c
CC:  string/lib_strtol.c
CC:  string/lib_strtoll.c
CC:  string/lib_strtoul.c
CC:  string/lib_strtoull.c
CC:  string/lib_strtod.c
CC:  pthread/pthread_attrinit.c
CC:  pthread/pthread_attrdestroy.c
CC:  pthread/pthread_attrsetschedpolicy.c
CC:  pthread/pthread_attrgetschedpolicy.c
CC:  pthread/pthread_attrsetinheritsched.c
CC:  pthread/pthread_attrgetinheritsched.c
CC:  pthread/pthread_attrsetstacksize.c
CC:  pthread/pthread_attrgetstacksize.c
CC:  pthread/pthread_attrsetschedparam.c
CC:  pthread/pthread_attrgetschedparam.c
CC:  pthread/pthread_barrierattrinit.c
CC:  pthread/pthread_barrierattrdestroy.c
CC:  pthread/pthread_barrierattrgetpshared.c
CC:  pthread/pthread_barrierattrsetpshared.c
CC:  pthread/pthread_condattrinit.c
CC:  pthread/pthread_condattrdestroy.c
CC:  pthread/pthread_mutexattrinit.c
CC:  pthread/pthread_mutexattrdestroy.c
CC:  pthread/pthread_mutexattrgetpshared.c
CC:  pthread/pthread_mutexattrsetpshared.c
CC:  semaphore/sem_init.c
CC:  semaphore/sem_getvalue.c
CC:  signal/sig_emptyset.c
CC:  signal/sig_fillset.c
CC:  signal/sig_addset.c
CC:  signal/sig_delset.c
CC:  signal/sig_ismember.c
CC:  mqueue/mq_setattr.c
CC:  mqueue/mq_getattr.c
CC:  fixedmath/lib_rint.c
CC:  fixedmath/lib_fixedmath.c
CC:  fixedmath/lib_b16sin.c
CC:  fixedmath/lib_b16cos.c
CC:  fixedmath/lib_b16atan2.c
CC:  net/lib_etherntoa.c
CC:  net/lib_htons.c
CC:  net/lib_htonl.c
CC:  net/lib_inetaddr.c
CC:  net/lib_inetntoa.c
CC:  net/lib_inetntop.c
CC:  net/lib_inetpton.c
CC:  time/lib_mktime.c
CC:  time/lib_gmtime.c
CC:  time/lib_gmtimer.c
CC:  time/lib_strftime.c
CC:  time/lib_calendar2utc.c
CC:  time/lib_daysbeforemonth.c
CC:  time/lib_isleapyear.c
CC:  time/lib_time.c
CC:  libgen/lib_basename.c
CC:  libgen/lib_dirname.c
CC:  dirent/lib_readdirr.c
CC:  dirent/lib_telldir.c
CC:  termios/lib_cfgetspeed.c
CC:  termios/lib_cfsetspeed.c
CC:  termios/lib_tcflush.c
CC:  termios/lib_tcgetattr.c
CC:  termios/lib_tcsetattr.c
CC:  spawn/lib_psfa_addaction.c
CC:  spawn/lib_psfa_addclose.c
CC:  spawn/lib_psfa_adddup2.c
CC:  spawn/lib_psfa_addopen.c
CC:  spawn/lib_psfa_destroy.c
CC:  spawn/lib_psfa_init.c
CC:  spawn/lib_psa_getflags.c
CC:  spawn/lib_psa_getschedparam.c
CC:  spawn/lib_psa_getschedpolicy.c
CC:  spawn/lib_psa_getstacksize.c
CC:  spawn/lib_psa_init.c
CC:  spawn/lib_psa_setflags.c
CC:  spawn/lib_psa_setschedparam.c
CC:  spawn/lib_psa_setschedpolicy.c
CC:  spawn/lib_psa_setstacksize.c
CC:  spawn/lib_psa_getsigmask.c
CC:  spawn/lib_psa_setsigmask.c
CC:  queue/sq_addlast.c
CC:  queue/sq_addfirst.c
CC:  queue/sq_addafter.c
CC:  queue/sq_rem.c
CC:  queue/sq_remlast.c
CC:  queue/sq_remfirst.c
CC:  queue/sq_remafter.c
CC:  queue/dq_addlast.c
CC:  queue/dq_addfirst.c
CC:  queue/dq_addafter.c
CC:  queue/dq_addbefore.c
CC:  queue/dq_rem.c
CC:  queue/dq_remlast.c
CC:  queue/dq_remfirst.c
CC:  wqueue/work_thread.c
CC:  wqueue/work_queue.c
CC:  wqueue/work_cancel.c
CC:  wqueue/work_signal.c
CC:  misc/lib_init.c
CC:  misc/lib_filesem.c
CC:  misc/lib_sendfile.c
CC:  misc/lib_streamsem.c
CC:  misc/lib_match.c
CC:  misc/lib_crc32.c
CC:  misc/lib_dbg.c
CC:  misc/lib_dumpbuffer.c
AR:    bin/lib_fileno.o  bin/lib_printf.o  bin/lib_syslog.o  bin/lib_lowsyslog.o  bin/lib_sprintf.o  bin/lib_asprintf.o  bin/lib_snprintf.o  bin/lib_libsprintf.o  bin/lib_vsprintf.o  bin/lib_avsprintf.o  bin/lib_vsnprintf.o  bin/lib_libvsprintf.o  bin/lib_dprintf.o  bin/lib_vdprintf.o  bin/lib_meminstream.o  bin/lib_memoutstream.o  bin/lib_lowinstream.o  bin/lib_lowoutstream.o  bin/lib_zeroinstream.o  bin/lib_nullinstream.o  bin/lib_nulloutstream.o  bin/lib_sscanf.o  bin/lib_rawinstream.o  bin/lib_rawoutstream.o  bin/lib_fopen.o  bin/lib_fclose.o  bin/lib_fread.o  bin/lib_libfread.o  bin/lib_fseek.o  bin/lib_ftell.o  bin/lib_fsetpos.o  bin/lib_fgetpos.o  bin/lib_fgetc.o  bin/lib_fgets.o  bin/lib_gets.o  bin/lib_fwrite.o  bin/lib_libfwrite.o  bin/lib_fflush.o  bin/lib_libflushall.o  bin/lib_libfflush.o  bin/lib_rdflush.o  bin/lib_wrflush.o  bin/lib_fputc.o  bin/lib_puts.o  bin/lib_fputs.o  bin/lib_ungetc.o  bin/lib_vprintf.o  bin/lib_fprintf.o  bin/lib_vfprintf.o  bin/lib_stdinstream.o  bin/lib_stdoutstream.o  bin/lib_perror.o  bin/lib_feof.o  bin/lib_ferror.o  bin/lib_clearerr.o  bin/lib_dtoa.o  bin/lib_libnoflush.o  bin/lib_abs.o  bin/lib_abort.o  bin/lib_imaxabs.o  bin/lib_itoa.o  bin/lib_labs.o  bin/lib_llabs.o  bin/lib_rand.o  bin/lib_qsort.o  bin/lib_getopt.o  bin/lib_getoptargp.o  bin/lib_getoptindp.o  bin/lib_getoptoptp.o  bin/lib_chdir.o  bin/lib_getcwd.o  bin/sched_getprioritymax.o  bin/sched_getprioritymin.o  bin/lib_checkbase.o  bin/lib_isbasedigit.o  bin/lib_memset.o  bin/lib_memchr.o  bin/lib_memccpy.o  bin/lib_memcmp.o  bin/lib_memmove.o  bin/lib_skipspace.o  bin/lib_strcasecmp.o  bin/lib_strcat.o  bin/lib_strchr.o  bin/lib_strcpy.o  bin/lib_strcmp.o  bin/lib_strcspn.o  bin/lib_strdup.o  bin/lib_strerror.o  bin/lib_strlen.o  bin/lib_strnlen.o  bin/lib_strncasecmp.o  bin/lib_strncat.o  bin/lib_strncmp.o  bin/lib_strncpy.o  bin/lib_strndup.o  bin/lib_strcasestr.o  bin/lib_strpbrk.o  bin/lib_strrchr.o  bin/lib_strspn.o  bin/lib_strstr.o  bin/lib_strtok.o  bin/lib_strtokr.o  bin/lib_strtol.o  bin/lib_strtoll.o  bin/lib_strtoul.o  bin/lib_strtoull.o  bin/lib_strtod.o  bin/pthread_attrinit.o  bin/pthread_attrdestroy.o  bin/pthread_attrsetschedpolicy.o  bin/pthread_attrgetschedpolicy.o  bin/pthread_attrsetinheritsched.o  bin/pthread_attrgetinheritsched.o  bin/pthread_attrsetstacksize.o  bin/pthread_attrgetstacksize.o  bin/pthread_attrsetschedparam.o  bin/pthread_attrgetschedparam.o  bin/pthread_barrierattrinit.o  bin/pthread_barrierattrdestroy.o  bin/pthread_barrierattrgetpshared.o  bin/pthread_barrierattrsetpshared.o  bin/pthread_condattrinit.o  bin/pthread_condattrdestroy.o  bin/pthread_mutexattrinit.o  bin/pthread_mutexattrdestroy.o  bin/pthread_mutexattrgetpshared.o  bin/pthread_mutexattrsetpshared.o  bin/sem_init.o  bin/sem_getvalue.o  bin/sig_emptyset.o  bin/sig_fillset.o  bin/sig_addset.o  bin/sig_delset.o  bin/sig_ismember.o  bin/mq_setattr.o  bin/mq_getattr.o  bin/lib_rint.o  bin/lib_fixedmath.o  bin/lib_b16sin.o  bin/lib_b16cos.o  bin/lib_b16atan2.o  bin/lib_etherntoa.o  bin/lib_htons.o  bin/lib_htonl.o  bin/lib_inetaddr.o  bin/lib_inetntoa.o  bin/lib_inetntop.o  bin/lib_inetpton.o  bin/lib_mktime.o  bin/lib_gmtime.o  bin/lib_gmtimer.o  bin/lib_strftime.o  bin/lib_calendar2utc.o  bin/lib_daysbeforemonth.o  bin/lib_isleapyear.o  bin/lib_time.o  bin/lib_basename.o  bin/lib_dirname.o  bin/lib_readdirr.o  bin/lib_telldir.o  bin/lib_cfgetspeed.o  bin/lib_cfsetspeed.o  bin/lib_tcflush.o  bin/lib_tcgetattr.o  bin/lib_tcsetattr.o  bin/lib_psfa_addaction.o  bin/lib_psfa_addclose.o  bin/lib_psfa_adddup2.o  bin/lib_psfa_addopen.o  bin/lib_psfa_destroy.o  bin/lib_psfa_init.o  bin/lib_psa_getflags.o  bin/lib_psa_getschedparam.o  bin/lib_psa_getschedpolicy.o  bin/lib_psa_getstacksize.o  bin/lib_psa_init.o  bin/lib_psa_setflags.o  bin/lib_psa_setschedparam.o  bin/lib_psa_setschedpolicy.o  bin/lib_psa_setstacksize.o  bin/lib_psa_getsigmask.o  bin/lib_psa_setsigmask.o  bin/sq_addlast.o  bin/sq_addfirst.o  bin/sq_addafter.o  bin/sq_rem.o  bin/sq_remlast.o  bin/sq_remfirst.o  bin/sq_remafter.o  bin/dq_addlast.o  bin/dq_addfirst.o  bin/dq_addafter.o  bin/dq_addbefore.o  bin/dq_rem.o  bin/dq_remlast.o  bin/dq_remfirst.o  bin/work_thread.o  bin/work_queue.o  bin/work_cancel.o  bin/work_signal.o  bin/lib_init.o  bin/lib_filesem.o  bin/lib_sendfile.o  bin/lib_streamsem.o  bin/lib_match.o  bin/lib_crc32.o  bin/lib_dbg.o  bin/lib_dumpbuffer.o
CC:  mm_initialize.c
CC:  mm_sem.c
CC:  mm_addfreechunk.c
CC:  mm_size2ndx.c
CC:  mm_shrinkchunk.c
CC:  mm_malloc.c
CC:  mm_zalloc.c
CC:  mm_calloc.c
CC:  mm_realloc.c
CC:  mm_memalign.c
mm_memalign.c: In function 'mm_memalign':
mm_memalign.c:106:14: warning: cast from function call of type 'void *' to non-matching type 'unsigned int' [-Wbad-function-cast]
   rawchunk = (size_t)malloc(allocsize);
              ^
CC:  mm_free.c
CC:  mm_mallinfo.c
CC:  mm_user.c
CC:  mm_graninit.c
CC:  mm_granalloc.c
CC:  mm_granfree.c
CC:  mm_grancritical.c
AR:    bin/mm_initialize.o  bin/mm_sem.o  bin/mm_addfreechunk.o  bin/mm_size2ndx.o  bin/mm_shrinkchunk.o  bin/mm_malloc.o  bin/mm_zalloc.o  bin/mm_calloc.o  bin/mm_realloc.o  bin/mm_memalign.o  bin/mm_free.o  bin/mm_mallinfo.o  bin/mm_user.o  bin/mm_graninit.o  bin/mm_granalloc.o  bin/mm_granfree.o  bin/mm_grancritical.o
AS:  chip/stm32_vectors.S
AS:  armv7-m/up_saveusercontext.S
AS:  armv7-m/up_fullcontextrestore.S
AS:  armv7-m/up_switchcontext.S
AS:  armv7-m/vfork.S
AS:  armv7-m/up_exception.S
AS:  armv7-m/up_memcpy.S
AS:  armv7-m/up_fpu.S
CC:  chip/stm32_allocateheap.c
chip/stm32_allocateheap.c:358:8: warning: #warning "CCM SRAM is included in the heap AND DMA is enabled" [-Wcpp]
 #      warning "CCM SRAM is included in the heap AND DMA is enabled"
        ^
CC:  chip/stm32_start.c
CC:  chip/stm32_rcc.c
CC:  chip/stm32_lse.c
CC:  chip/stm32_lsi.c
CC:  chip/stm32_gpio.c
CC:  chip/stm32_exti_gpio.c
CC:  chip/stm32_flash.c
CC:  chip/stm32_irq.c
CC:  chip/stm32_timerisr.c
CC:  chip/stm32_dma.c
CC:  chip/stm32_lowputc.c
CC:  chip/stm32_serial.c
CC:  chip/stm32_spi.c
chip/stm32_spi.c: In function 'spi_send':
chip/stm32_spi.c:1242:12: warning: variable 'regval' set but not used [-Wunused-but-set-variable]
   uint32_t regval;
            ^
CC:  chip/stm32_sdio.c
chip/stm32_sdio.c: In function 'stm32_dmasendsetup':
chip/stm32_sdio.c:2662:7: warning: unused variable 'ret' [-Wunused-variable]
   int ret = -EINVAL;
       ^
CC:  chip/stm32_tim.c
chip/stm32_tim.c:241:13: warning: 'stm32_tim_gpioconfig' defined but not used [-Wunused-function]
 static void stm32_tim_gpioconfig(uint32_t cfg, stm32_tim_channel_t mode)
             ^
CC:  chip/stm32_i2c.c
chip/stm32_i2c.c: In function 'up_i2creset':
chip/stm32_i2c.c:2050:16: warning: unused variable 'state' [-Wunused-variable]
     irqstate_t state;
                ^
CC:  chip/stm32_waste.c
CC:  chip/stm32_otgfsdev.c
chip/stm32_otgfsdev.c: In function 'stm32_ep0out_testmode':
chip/stm32_otgfsdev.c:2040:12: warning: variable 'regval' set but not used [-Wunused-but-set-variable]
   uint32_t regval;
            ^
chip/stm32_otgfsdev.c: In function 'stm32_ep_cancel':
chip/stm32_otgfsdev.c:4434:30: warning: variable 'priv' set but not used [-Wunused-but-set-variable]
   FAR struct stm32_usbdev_s *priv;
                              ^
CC:  chip/stm32_idle.c
CC:  chip/stm32_pmstop.c
CC:  chip/stm32_pmstandby.c
CC:  chip/stm32_pmsleep.c
CC:  chip/stm32_pminitialize.c
CC:  chip/stm32_pwr.c
CC:  chip/stm32_rtc.c
In file included from chip/stm32_rtc.c:84:0:
chip/stm32_rtcc.c: In function 'up_rtcinitialize':
chip/stm32_rtcc.c:600:7: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
   int ret;
       ^
CC:  chip/stm32_wwdg.c
CC:  armv7-m/up_assert.c
CC:  armv7-m/up_blocktask.c
CC:  armv7-m/up_copystate.c
CC:  common/up_createstack.c
CC:  common/up_mdelay.c
CC:  common/up_udelay.c
CC:  common/up_exit.c
CC:  common/up_initialize.c
CC:  armv7-m/up_initialstate.c
CC:  common/up_interruptcontext.c
CC:  armv7-m/up_memfault.c
CC:  common/up_modifyreg8.c
CC:  common/up_modifyreg16.c
CC:  common/up_modifyreg32.c
CC:  armv7-m/up_releasepending.c
CC:  common/up_releasestack.c
CC:  armv7-m/up_reprioritizertr.c
CC:  armv7-m/up_schedulesigaction.c
CC:  armv7-m/up_sigdeliver.c
CC:  armv7-m/up_systemreset.c
CC:  armv7-m/up_unblocktask.c
CC:  common/up_usestack.c
CC:  armv7-m/up_doirq.c
CC:  armv7-m/up_hardfault.c
CC:  armv7-m/up_svcall.c
CC:  common/up_vfork.c
CC:  armv7-m/up_vectors.c
AR:  stm32_vectors.o up_saveusercontext.o up_fullcontextrestore.o up_switchcontext.o vfork.o up_exception.o up_memcpy.o up_fpu.o stm32_allocateheap.o stm32_start.o stm32_rcc.o stm32_lse.o stm32_lsi.o stm32_gpio.o stm32_exti_gpio.o stm32_flash.o stm32_irq.o stm32_timerisr.o stm32_dma.o stm32_lowputc.o stm32_serial.o stm32_spi.o stm32_sdio.o stm32_tim.o stm32_i2c.o stm32_waste.o stm32_otgfsdev.o stm32_idle.o stm32_pmstop.o stm32_pmstandby.o stm32_pmsleep.o stm32_pminitialize.o stm32_pwr.o stm32_rtc.o stm32_wwdg.o up_assert.o up_blocktask.o up_copystate.o up_createstack.o up_mdelay.o up_udelay.o up_exit.o up_initialize.o up_initialstate.o up_interruptcontext.o up_memfault.o up_modifyreg8.o up_modifyreg16.o up_modifyreg32.o up_releasepending.o up_releasestack.o up_reprioritizertr.o up_schedulesigaction.o up_sigdeliver.o up_systemreset.o up_unblocktask.o up_usestack.o up_doirq.o up_hardfault.o up_svcall.o up_vfork.o up_vectors.o
CXX:  libxx_cxapurevirtual.cxx
CXX:  libxx_eabi_atexit.cxx
CXX:  libxx_cxa_atexit.cxx
CXX:  libxx_delete.cxx
CXX:  libxx_deletea.cxx
CXX:  libxx_new.cxx
CXX:  libxx_newa.cxx
CXX:  libxx_stdthrow.cxx
AR:    libxx_cxapurevirtual.o libxx_eabi_atexit.o libxx_cxa_atexit.o libxx_delete.o libxx_deletea.o libxx_new.o libxx_newa.o libxx_stdthrow.o
CC:  builtin.c
CC:  builtin_list.c
CC:  exec_builtin.c
AR:   builtin.o builtin_list.o exec_builtin.o
CC:  cdcacm_main.c
AR:   cdcacm_main.o
CC:  mount_main.c
CC:  ramdisk.c
ramdisk.c: In function 'create_ramdisk':
ramdisk.c:116:21: warning: pointer targets in passing argument 2 of 'ramdisk_register' differ in signedness [-Wpointer-sign]
                     pbuffer,
                     ^
In file included from ramdisk.c:48:0:
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4NuttX/nuttx/include/nuttx/ramdisk.h:86:12: note: expected 'uint8_t *' but argument is of type 'char *'
 EXTERN int ramdisk_register(int minor, FAR uint8_t *buffer, uint32_t nsectors,
            ^
AR:   mount_main.o ramdisk.o
CC:  nsh_main.c
AR:   nsh_main.o
CC:  nsh_init.c
CC:  nsh_parse.c
CC:  nsh_console.c
CC:  nsh_script.c
CC:  nsh_session.c
CC:  nsh_fscmds.c
CC:  nsh_ddcmd.c
CC:  nsh_proccmds.c
CC:  nsh_mmcmds.c
CC:  nsh_envcmds.c
CC:  nsh_dbgcmds.c
CC:  nsh_builtin.c
CC:  nsh_romfsetc.c
CC:  nsh_timcmds.c
CC:  nsh_mntcmds.c
CC:  nsh_consolemain.c
CC:  nsh_test.c
CC:  nsh_usbdev.c
AR:   nsh_init.o nsh_parse.o nsh_console.o nsh_script.o nsh_session.o nsh_fscmds.o nsh_ddcmd.o nsh_proccmds.o nsh_mmcmds.o nsh_envcmds.o nsh_dbgcmds.o nsh_builtin.o nsh_romfsetc.o nsh_timcmds.o nsh_mntcmds.o nsh_consolemain.o nsh_test.o nsh_usbdev.o
CC:  readline.c
AR:   readline.o
CC:  sysinfo.c
AR:   sysinfo.o
CC:  fs_close.c
CC:  fs_closedir.c
CC:  fs_dup.c
CC:  fs_dup2.c
CC:  fs_fcntl.c
CC:  fs_filedup.c
CC:  fs_filedup2.c
CC:  fs_ioctl.c
CC:  fs_lseek.c
CC:  fs_open.c
CC:  fs_opendir.c
CC:  fs_poll.c
CC:  fs_read.c
CC:  fs_readdir.c
CC:  fs_rewinddir.c
CC:  fs_seekdir.c
CC:  fs_stat.c
CC:  fs_statfs.c
CC:  fs_select.c
CC:  fs_write.c
CC:  fs_files.c
CC:  fs_foreachinode.c
CC:  fs_inode.c
CC:  fs_inodeaddref.c
CC:  fs_inodefind.c
CC:  fs_inoderelease.c
CC:  fs_inoderemove.c
CC:  fs_inodereserve.c
CC:  fs_registerdriver.c
CC:  fs_unregisterdriver.c
CC:  fs_registerblockdriver.c
CC:  fs_unregisterblockdriver.c
CC:  fs_findblockdriver.c
CC:  fs_openblockdriver.c
CC:  fs_closeblockdriver.c
CC:  mmap/fs_mmap.c
CC:  fs_fdopen.c
CC:  fs_fsync.c
CC:  fs_mkdir.c
CC:  fs_mount.c
CC:  fs_rename.c
CC:  fs_rmdir.c
CC:  fs_umount.c
CC:  fs_unlink.c
CC:  fs_foreachmountpoint.c
CC:  fat/fs_fat32.c
fat/fs_fat32.c: In function 'fat_unlink':
fat/fs_fat32.c:1949:4: warning: #warning "Need to defer deleting cluster chain if the file is open" [-Wcpp]
 #  warning "Need to defer deleting cluster chain if the file is open"
    ^
fat/fs_fat32.c: In function 'fat_rmdir':
fat/fs_fat32.c:2214:4: warning: #warning "Need to defer deleting cluster chain if the directory is open" [-Wcpp]
 #  warning "Need to defer deleting cluster chain if the directory is open"
    ^
CC:  fat/fs_fat32dirent.c
CC:  fat/fs_fat32attrib.c
CC:  fat/fs_fat32util.c
CC:  fat/fs_mkfatfs.c
CC:  fat/fs_configfat.c
CC:  fat/fs_writefat.c
CC:  romfs/fs_romfs.c
CC:  romfs/fs_romfsutil.c
CC:  binfs/fs_binfs.c
AR:   fs_close.o fs_closedir.o fs_dup.o fs_dup2.o fs_fcntl.o fs_filedup.o fs_filedup2.o fs_ioctl.o fs_lseek.o fs_open.o fs_opendir.o fs_poll.o fs_read.o fs_readdir.o fs_rewinddir.o fs_seekdir.o fs_stat.o fs_statfs.o fs_select.o fs_write.o fs_files.o fs_foreachinode.o fs_inode.o fs_inodeaddref.o fs_inodefind.o fs_inoderelease.o fs_inoderemove.o fs_inodereserve.o fs_registerdriver.o fs_unregisterdriver.o fs_registerblockdriver.o fs_unregisterblockdriver.o fs_findblockdriver.o fs_openblockdriver.o fs_closeblockdriver.o fs_mmap.o fs_fdopen.o fs_fsync.o fs_mkdir.o fs_mount.o fs_rename.o fs_rmdir.o fs_umount.o fs_unlink.o fs_foreachmountpoint.o fs_fat32.o fs_fat32dirent.o fs_fat32attrib.o fs_fat32util.o fs_mkfatfs.o fs_configfat.o fs_writefat.o fs_romfs.o fs_romfsutil.o fs_binfs.o
CC:  bch/bchlib_setup.c
CC:  bch/bchlib_teardown.c
CC:  bch/bchlib_read.c
CC:  bch/bchlib_write.c
CC:  bch/bchlib_cache.c
CC:  bch/bchlib_sem.c
CC:  bch/bchdev_register.c
CC:  bch/bchdev_unregister.c
CC:  bch/bchdev_driver.c
CC:  mmcsd/mmcsd_sdio.c
CC:  mtd/at45db.c
CC:  mtd/flash_eraseall.c
CC:  mtd/ftl.c
CC:  mtd/m25px.c
CC:  mtd/ramtron.c
mtd/ramtron.c: In function 'ramtron_readid':
mtd/ramtron.c:361:26: warning: variable 'memory' set but not used [-Wunused-but-set-variable]
   uint16_t manufacturer, memory, capacity, part;
                          ^
CC:  mtd/mtd_partition.c
CC:  pipes/pipe.c
pipes/pipe.c:91:1: warning: missing initializer for field 'holder' of 'sem_t' [-Wmissing-field-initializers]
 static sem_t  g_pipesem       = { 1 };
 ^
In file included from c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4NuttX/nuttx/include/nuttx/fs/fs.h:49:0,
                 from pipes/pipe.c:47:
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4NuttX/nuttx/include/semaphore.h:97:22: note: 'holder' declared here
   struct semholder_s holder;     /* Single holder */
                      ^
CC:  pipes/fifo.c
CC:  pipes/pipe_common.c
CC:  sensors/lis331dl.c
CC:  serial/serial.c
CC:  serial/serialirq.c
CC:  serial/lowconsole.c
CC:  usbdev/cdcacm.c
usbdev/cdcacm.c:245:1: warning: missing initializer for field 'onrxdeque' of 'const struct uart_ops_s' [-Wmissing-field-initializers]
 };
 ^
In file included from usbdev/cdcacm.c:56:0:
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4NuttX/nuttx/include/nuttx/serial/serial.h:191:15: note: 'onrxdeque' declared here
   CODE void (*onrxdeque)(FAR struct uart_dev_s *dev);
               ^
CC:  usbdev/cdcacm_desc.c
CC:  usbdev/usbdev_trace.c
CC:  usbdev/usbdev_trprintf.c
CC:  usbhost/hid_parser.c
CC:  dev_null.c
CC:  dev_zero.c
CC:  loop.c
CC:  ramdisk.c
CC:  rwbuffer.c
CC:  watchdog.c
AR:   bchlib_setup.o bchlib_teardown.o bchlib_read.o bchlib_write.o bchlib_cache.o bchlib_sem.o bchdev_register.o bchdev_unregister.o bchdev_driver.o mmcsd_sdio.o at45db.o flash_eraseall.o ftl.o m25px.o ramtron.o mtd_partition.o pipe.o fifo.o pipe_common.o lis331dl.o serial.o serialirq.o lowconsole.o cdcacm.o cdcacm_desc.o usbdev_trace.o usbdev_trprintf.o hid_parser.o dev_null.o dev_zero.o loop.o ramdisk.o rwbuffer.o watchdog.o
CC:  binfmt_globals.c
CC:  binfmt_register.c
CC:  binfmt_unregister.c
CC:  binfmt_loadmodule.c
CC:  binfmt_unloadmodule.c
CC:  binfmt_execmodule.c
CC:  binfmt_exec.c
CC:  binfmt_dumpmodule.c
CC:  symtab_findbyname.c
CC:  symtab_findbyvalue.c
CC:  symtab_findorderedbyname.c
CC:  symtab_findorderedbyvalue.c
CC:  builtin.c
CC:  libbuiltin/libbuiltin_getname.c
CC:  libbuiltin/libbuiltin_isavail.c
AR:   binfmt_globals.o binfmt_register.o binfmt_unregister.o binfmt_loadmodule.o binfmt_unloadmodule.o binfmt_execmodule.o binfmt_exec.o binfmt_dumpmodule.o symtab_findbyname.o symtab_findbyvalue.o symtab_findorderedbyname.o symtab_findorderedbyvalue.o builtin.o libbuiltin_getname.o libbuiltin_isavail.o
CC:  empty.c
AR:   empty.o
make[1]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware'
Building /c/Users/Brian/Documents/GitHubSources/ardupilot/module.mk
%% module_mk
make[1]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware'
Skipping submodules. NUTTX_SRC is set to /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4NuttX/nuttx/
%% Configuring NuttX for px4io-v2
%% Exporting NuttX for px4io-v2
LN: include/arch to arch/arm/include
LN: include/arch/board to configs/px4io-v2/include
LN: include/arch/chip to arch/arm/include/stm32
LN: arch/arm/src/board to configs/px4io-v2/src
LN: arch/arm/src/chip to arch/arm/src/stm32
LN: include/apps to ../apps/include
make[5]: Nothing to be done for `context'.
CC:  os_start.c
CC:  os_bringup.c
CC:  errno_getptr.c
CC:  errno_get.c
CC:  errno_set.c
CC:  sched_garbage.c
CC:  sched_getfiles.c
CC:  sched_getsockets.c
CC:  sched_getstreams.c
CC:  prctl.c
CC:  exit.c
CC:  getpid.c
CC:  task_create.c
CC:  task_init.c
CC:  task_setup.c
CC:  task_activate.c
CC:  task_start.c
CC:  task_delete.c
CC:  task_exit.c
CC:  task_exithook.c
CC:  task_recover.c
CC:  task_restart.c
CC:  task_spawn.c
CC:  task_spawnparms.c
CC:  task_terminate.c
CC:  sched_addreadytorun.c
CC:  sched_removereadytorun.c
CC:  sched_addprioritized.c
CC:  sched_mergepending.c
CC:  sched_addblocked.c
CC:  sched_removeblocked.c
CC:  sched_free.c
CC:  sched_gettcb.c
CC:  sched_verifytcb.c
CC:  sched_releasetcb.c
CC:  group_create.c
CC:  group_join.c
CC:  group_leave.c
CC:  group_find.c
CC:  group_setupstreams.c
CC:  group_setupidlefiles.c
CC:  group_setuptaskfiles.c
CC:  task_getgroup.c
CC:  group_foreachchild.c
CC:  group_killchildren.c
CC:  sched_setparam.c
CC:  sched_setpriority.c
CC:  sched_getparam.c
CC:  sched_setscheduler.c
CC:  sched_getscheduler.c
CC:  sched_yield.c
CC:  sched_rrgetinterval.c
CC:  sched_foreach.c
CC:  sched_lock.c
CC:  sched_unlock.c
CC:  sched_lockcount.c
CC:  sched_self.c
CC:  wd_initialize.c
CC:  wd_create.c
CC:  wd_start.c
CC:  wd_cancel.c
CC:  wd_delete.c
CC:  wd_gettime.c
CC:  sched_processtimer.c
CC:  sem_initialize.c
CC:  sem_destroy.c
CC:  sem_open.c
CC:  sem_close.c
CC:  sem_unlink.c
CC:  sem_wait.c
CC:  sem_trywait.c
CC:  sem_timedwait.c
sem_timedwait.c: In function 'sem_timedwait':
sem_timedwait.c:226:23: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
   if (abstime->tv_sec < 0 || abstime->tv_nsec > 1000000000)
                       ^
CC:  sem_post.c
CC:  sem_findnamed.c
CC:  irq_initialize.c
CC:  irq_attach.c
CC:  irq_dispatch.c
CC:  irq_unexpectedisr.c
CC:  clock_initialize.c
CC:  clock_settime.c
CC:  clock_gettime.c
CC:  clock_getres.c
CC:  clock_time2ticks.c
CC:  clock_abstime2ticks.c
CC:  clock_ticks2time.c
CC:  clock_gettimeofday.c
CC:  clock_systimer.c
AR:   os_start.o os_bringup.o errno_getptr.o errno_get.o errno_set.o sched_garbage.o sched_getfiles.o sched_getsockets.o sched_getstreams.o prctl.o exit.o getpid.o task_create.o task_init.o task_setup.o task_activate.o task_start.o task_delete.o task_exit.o task_exithook.o task_recover.o task_restart.o task_spawn.o task_spawnparms.o task_terminate.o sched_addreadytorun.o sched_removereadytorun.o sched_addprioritized.o sched_mergepending.o sched_addblocked.o sched_removeblocked.o sched_free.o sched_gettcb.o sched_verifytcb.o sched_releasetcb.o group_create.o group_join.o group_leave.o group_find.o group_setupstreams.o group_setupidlefiles.o group_setuptaskfiles.o task_getgroup.o group_foreachchild.o group_killchildren.o sched_setparam.o sched_setpriority.o sched_getparam.o sched_setscheduler.o sched_getscheduler.o sched_yield.o sched_rrgetinterval.o sched_foreach.o sched_lock.o sched_unlock.o sched_lockcount.o sched_self.o wd_initialize.o wd_create.o wd_start.o wd_cancel.o wd_delete.o wd_gettime.o sched_processtimer.o sem_initialize.o sem_destroy.o sem_open.o sem_close.o sem_unlink.o sem_wait.o sem_trywait.o sem_timedwait.o sem_post.o sem_findnamed.o irq_initialize.o irq_attach.o irq_dispatch.o irq_unexpectedisr.o clock_initialize.o clock_settime.o clock_gettime.o clock_getres.o clock_time2ticks.o clock_abstime2ticks.o clock_ticks2time.o clock_gettimeofday.o clock_systimer.o
CC:  stdio/lib_fileno.c
CC:  stdio/lib_printf.c
stdio/lib_printf.c: In function 'printf':
stdio/lib_printf.c:96:3: warning: implicit declaration of function 'vsyslog' [-Wimplicit-function-declaration]
   ret = vsyslog(fmt, ap);
   ^
stdio/lib_printf.c:96:3: warning: nested extern declaration of 'vsyslog' [-Wnested-externs]
CC:  stdio/lib_syslog.c
CC:  stdio/lib_lowsyslog.c
CC:  stdio/lib_sprintf.c
CC:  stdio/lib_asprintf.c
CC:  stdio/lib_snprintf.c
CC:  stdio/lib_libsprintf.c
CC:  stdio/lib_vsprintf.c
CC:  stdio/lib_avsprintf.c
CC:  stdio/lib_vsnprintf.c
CC:  stdio/lib_libvsprintf.c
CC:  stdio/lib_dprintf.c
CC:  stdio/lib_vdprintf.c
CC:  stdio/lib_meminstream.c
CC:  stdio/lib_memoutstream.c
CC:  stdio/lib_lowinstream.c
CC:  stdio/lib_lowoutstream.c
CC:  stdio/lib_zeroinstream.c
CC:  stdio/lib_nullinstream.c
CC:  stdio/lib_nulloutstream.c
CC:  stdio/lib_sscanf.c
CC:  stdio/lib_rawinstream.c
CC:  stdio/lib_rawoutstream.c
CC:  stdlib/lib_abs.c
CC:  stdlib/lib_abort.c
CC:  stdlib/lib_imaxabs.c
CC:  stdlib/lib_itoa.c
CC:  stdlib/lib_labs.c
CC:  stdlib/lib_llabs.c
CC:  stdlib/lib_rand.c
CC:  stdlib/lib_qsort.c
CC:  unistd/lib_getopt.c
CC:  unistd/lib_getoptargp.c
CC:  unistd/lib_getoptindp.c
CC:  unistd/lib_getoptoptp.c
CC:  sched/sched_getprioritymax.c
CC:  sched/sched_getprioritymin.c
CC:  string/lib_checkbase.c
CC:  string/lib_isbasedigit.c
CC:  string/lib_memset.c
CC:  string/lib_memchr.c
CC:  string/lib_memccpy.c
CC:  string/lib_memcmp.c
CC:  string/lib_memmove.c
CC:  string/lib_skipspace.c
CC:  string/lib_strcasecmp.c
CC:  string/lib_strcat.c
CC:  string/lib_strchr.c
CC:  string/lib_strcpy.c
CC:  string/lib_strcmp.c
CC:  string/lib_strcspn.c
CC:  string/lib_strdup.c
CC:  string/lib_strerror.c
CC:  string/lib_strlen.c
CC:  string/lib_strnlen.c
CC:  string/lib_strncasecmp.c
CC:  string/lib_strncat.c
CC:  string/lib_strncmp.c
CC:  string/lib_strncpy.c
CC:  string/lib_strndup.c
CC:  string/lib_strcasestr.c
CC:  string/lib_strpbrk.c
CC:  string/lib_strrchr.c
CC:  string/lib_strspn.c
CC:  string/lib_strstr.c
CC:  string/lib_strtok.c
CC:  string/lib_strtokr.c
CC:  string/lib_strtol.c
CC:  string/lib_strtoll.c
CC:  string/lib_strtoul.c
CC:  string/lib_strtoull.c
CC:  string/lib_strtod.c
CC:  string/lib_memcpy.c
CC:  pthread/pthread_attrinit.c
CC:  pthread/pthread_attrdestroy.c
CC:  pthread/pthread_attrsetschedpolicy.c
CC:  pthread/pthread_attrgetschedpolicy.c
CC:  pthread/pthread_attrsetinheritsched.c
CC:  pthread/pthread_attrgetinheritsched.c
CC:  pthread/pthread_attrsetstacksize.c
CC:  pthread/pthread_attrgetstacksize.c
CC:  pthread/pthread_attrsetschedparam.c
CC:  pthread/pthread_attrgetschedparam.c
CC:  pthread/pthread_barrierattrinit.c
CC:  pthread/pthread_barrierattrdestroy.c
CC:  pthread/pthread_barrierattrgetpshared.c
CC:  pthread/pthread_barrierattrsetpshared.c
CC:  pthread/pthread_condattrinit.c
CC:  pthread/pthread_condattrdestroy.c
CC:  pthread/pthread_mutexattrinit.c
CC:  pthread/pthread_mutexattrdestroy.c
CC:  pthread/pthread_mutexattrgetpshared.c
CC:  pthread/pthread_mutexattrsetpshared.c
CC:  semaphore/sem_init.c
CC:  semaphore/sem_getvalue.c
CC:  fixedmath/lib_rint.c
CC:  fixedmath/lib_fixedmath.c
CC:  fixedmath/lib_b16sin.c
CC:  fixedmath/lib_b16cos.c
CC:  fixedmath/lib_b16atan2.c
CC:  net/lib_etherntoa.c
CC:  net/lib_htons.c
CC:  net/lib_htonl.c
CC:  net/lib_inetaddr.c
CC:  net/lib_inetntoa.c
CC:  net/lib_inetntop.c
CC:  net/lib_inetpton.c
CC:  time/lib_mktime.c
CC:  time/lib_gmtime.c
CC:  time/lib_gmtimer.c
CC:  time/lib_strftime.c
CC:  time/lib_calendar2utc.c
CC:  time/lib_daysbeforemonth.c
CC:  time/lib_isleapyear.c
CC:  time/lib_time.c
CC:  libgen/lib_basename.c
CC:  libgen/lib_dirname.c
CC:  dirent/lib_readdirr.c
CC:  dirent/lib_telldir.c
CC:  termios/lib_cfgetspeed.c
CC:  termios/lib_cfsetspeed.c
CC:  termios/lib_tcflush.c
CC:  termios/lib_tcgetattr.c
CC:  termios/lib_tcsetattr.c
CC:  spawn/lib_psfa_addaction.c
CC:  spawn/lib_psfa_addclose.c
CC:  spawn/lib_psfa_adddup2.c
CC:  spawn/lib_psfa_addopen.c
CC:  spawn/lib_psfa_destroy.c
CC:  spawn/lib_psfa_init.c
CC:  spawn/lib_psa_getflags.c
CC:  spawn/lib_psa_getschedparam.c
CC:  spawn/lib_psa_getschedpolicy.c
CC:  spawn/lib_psa_getstacksize.c
CC:  spawn/lib_psa_init.c
CC:  spawn/lib_psa_setflags.c
CC:  spawn/lib_psa_setschedparam.c
CC:  spawn/lib_psa_setschedpolicy.c
CC:  spawn/lib_psa_setstacksize.c
CC:  queue/sq_addlast.c
CC:  queue/sq_addfirst.c
CC:  queue/sq_addafter.c
CC:  queue/sq_rem.c
CC:  queue/sq_remlast.c
CC:  queue/sq_remfirst.c
CC:  queue/sq_remafter.c
CC:  queue/dq_addlast.c
CC:  queue/dq_addfirst.c
CC:  queue/dq_addafter.c
CC:  queue/dq_addbefore.c
CC:  queue/dq_rem.c
CC:  queue/dq_remlast.c
CC:  queue/dq_remfirst.c
CC:  misc/lib_init.c
CC:  misc/lib_filesem.c
CC:  misc/lib_sendfile.c
CC:  misc/lib_match.c
CC:  misc/lib_crc32.c
CC:  misc/lib_dbg.c
CC:  misc/lib_dumpbuffer.c
AR:    bin/lib_fileno.o  bin/lib_printf.o  bin/lib_syslog.o  bin/lib_lowsyslog.o  bin/lib_sprintf.o  bin/lib_asprintf.o  bin/lib_snprintf.o  bin/lib_libsprintf.o  bin/lib_vsprintf.o  bin/lib_avsprintf.o  bin/lib_vsnprintf.o  bin/lib_libvsprintf.o  bin/lib_dprintf.o  bin/lib_vdprintf.o  bin/lib_meminstream.o  bin/lib_memoutstream.o  bin/lib_lowinstream.o  bin/lib_lowoutstream.o  bin/lib_zeroinstream.o  bin/lib_nullinstream.o  bin/lib_nulloutstream.o  bin/lib_sscanf.o  bin/lib_rawinstream.o  bin/lib_rawoutstream.o  bin/lib_abs.o  bin/lib_abort.o  bin/lib_imaxabs.o  bin/lib_itoa.o  bin/lib_labs.o  bin/lib_llabs.o  bin/lib_rand.o  bin/lib_qsort.o  bin/lib_getopt.o  bin/lib_getoptargp.o  bin/lib_getoptindp.o  bin/lib_getoptoptp.o  bin/sched_getprioritymax.o  bin/sched_getprioritymin.o  bin/lib_checkbase.o  bin/lib_isbasedigit.o  bin/lib_memset.o  bin/lib_memchr.o  bin/lib_memccpy.o  bin/lib_memcmp.o  bin/lib_memmove.o  bin/lib_skipspace.o  bin/lib_strcasecmp.o  bin/lib_strcat.o  bin/lib_strchr.o  bin/lib_strcpy.o  bin/lib_strcmp.o  bin/lib_strcspn.o  bin/lib_strdup.o  bin/lib_strerror.o  bin/lib_strlen.o  bin/lib_strnlen.o  bin/lib_strncasecmp.o  bin/lib_strncat.o  bin/lib_strncmp.o  bin/lib_strncpy.o  bin/lib_strndup.o  bin/lib_strcasestr.o  bin/lib_strpbrk.o  bin/lib_strrchr.o  bin/lib_strspn.o  bin/lib_strstr.o  bin/lib_strtok.o  bin/lib_strtokr.o  bin/lib_strtol.o  bin/lib_strtoll.o  bin/lib_strtoul.o  bin/lib_strtoull.o  bin/lib_strtod.o  bin/lib_memcpy.o  bin/pthread_attrinit.o  bin/pthread_attrdestroy.o  bin/pthread_attrsetschedpolicy.o  bin/pthread_attrgetschedpolicy.o  bin/pthread_attrsetinheritsched.o  bin/pthread_attrgetinheritsched.o  bin/pthread_attrsetstacksize.o  bin/pthread_attrgetstacksize.o  bin/pthread_attrsetschedparam.o  bin/pthread_attrgetschedparam.o  bin/pthread_barrierattrinit.o  bin/pthread_barrierattrdestroy.o  bin/pthread_barrierattrgetpshared.o  bin/pthread_barrierattrsetpshared.o  bin/pthread_condattrinit.o  bin/pthread_condattrdestroy.o  bin/pthread_mutexattrinit.o  bin/pthread_mutexattrdestroy.o  bin/pthread_mutexattrgetpshared.o  bin/pthread_mutexattrsetpshared.o  bin/sem_init.o  bin/sem_getvalue.o  bin/lib_rint.o  bin/lib_fixedmath.o  bin/lib_b16sin.o  bin/lib_b16cos.o  bin/lib_b16atan2.o  bin/lib_etherntoa.o  bin/lib_htons.o  bin/lib_htonl.o  bin/lib_inetaddr.o  bin/lib_inetntoa.o  bin/lib_inetntop.o  bin/lib_inetpton.o  bin/lib_mktime.o  bin/lib_gmtime.o  bin/lib_gmtimer.o  bin/lib_strftime.o  bin/lib_calendar2utc.o  bin/lib_daysbeforemonth.o  bin/lib_isleapyear.o  bin/lib_time.o  bin/lib_basename.o  bin/lib_dirname.o  bin/lib_readdirr.o  bin/lib_telldir.o  bin/lib_cfgetspeed.o  bin/lib_cfsetspeed.o  bin/lib_tcflush.o  bin/lib_tcgetattr.o  bin/lib_tcsetattr.o  bin/lib_psfa_addaction.o  bin/lib_psfa_addclose.o  bin/lib_psfa_adddup2.o  bin/lib_psfa_addopen.o  bin/lib_psfa_destroy.o  bin/lib_psfa_init.o  bin/lib_psa_getflags.o  bin/lib_psa_getschedparam.o  bin/lib_psa_getschedpolicy.o  bin/lib_psa_getstacksize.o  bin/lib_psa_init.o  bin/lib_psa_setflags.o  bin/lib_psa_setschedparam.o  bin/lib_psa_setschedpolicy.o  bin/lib_psa_setstacksize.o  bin/sq_addlast.o  bin/sq_addfirst.o  bin/sq_addafter.o  bin/sq_rem.o  bin/sq_remlast.o  bin/sq_remfirst.o  bin/sq_remafter.o  bin/dq_addlast.o  bin/dq_addfirst.o  bin/dq_addafter.o  bin/dq_addbefore.o  bin/dq_rem.o  bin/dq_remlast.o  bin/dq_remfirst.o  bin/lib_init.o  bin/lib_filesem.o  bin/lib_sendfile.o  bin/lib_match.o  bin/lib_crc32.o  bin/lib_dbg.o  bin/lib_dumpbuffer.o
CC:  mm_initialize.c
CC:  mm_sem.c
CC:  mm_addfreechunk.c
CC:  mm_size2ndx.c
CC:  mm_shrinkchunk.c
CC:  mm_malloc.c
CC:  mm_zalloc.c
CC:  mm_calloc.c
CC:  mm_realloc.c
CC:  mm_memalign.c
mm_memalign.c: In function 'mm_memalign':
mm_memalign.c:106:14: warning: cast from function call of type 'void *' to non-matching type 'unsigned int' [-Wbad-function-cast]
   rawchunk = (size_t)malloc(allocsize);
              ^
CC:  mm_free.c
CC:  mm_mallinfo.c
CC:  mm_user.c
AR:    bin/mm_initialize.o  bin/mm_sem.o  bin/mm_addfreechunk.o  bin/mm_size2ndx.o  bin/mm_shrinkchunk.o  bin/mm_malloc.o  bin/mm_zalloc.o  bin/mm_calloc.o  bin/mm_realloc.o  bin/mm_memalign.o  bin/mm_free.o  bin/mm_mallinfo.o  bin/mm_user.o
AS:  chip/stm32_vectors.S
AS:  armv7-m/up_saveusercontext.S
AS:  armv7-m/up_fullcontextrestore.S
AS:  armv7-m/up_switchcontext.S
AS:  armv7-m/vfork.S
AS:  armv7-m/up_exception.S
CC:  chip/stm32_allocateheap.c
CC:  chip/stm32_start.c
CC:  chip/stm32_rcc.c
CC:  chip/stm32_lse.c
CC:  chip/stm32_lsi.c
CC:  chip/stm32_gpio.c
CC:  chip/stm32_exti_gpio.c
CC:  chip/stm32_flash.c
CC:  chip/stm32_irq.c
CC:  chip/stm32_timerisr.c
CC:  chip/stm32_dma.c
CC:  chip/stm32_lowputc.c
CC:  chip/stm32_serial.c
CC:  chip/stm32_spi.c
CC:  chip/stm32_sdio.c
CC:  chip/stm32_tim.c
CC:  chip/stm32_i2c.c
CC:  chip/stm32_waste.c
CC:  chip/stm32_idle.c
CC:  chip/stm32_pmstop.c
CC:  chip/stm32_pmstandby.c
CC:  chip/stm32_pmsleep.c
CC:  chip/stm32_pminitialize.c
CC:  armv7-m/up_assert.c
CC:  armv7-m/up_blocktask.c
CC:  armv7-m/up_copystate.c
CC:  common/up_createstack.c
CC:  common/up_mdelay.c
CC:  common/up_udelay.c
CC:  common/up_exit.c
CC:  common/up_initialize.c
CC:  armv7-m/up_initialstate.c
CC:  common/up_interruptcontext.c
CC:  armv7-m/up_memfault.c
CC:  common/up_modifyreg8.c
CC:  common/up_modifyreg16.c
CC:  common/up_modifyreg32.c
CC:  armv7-m/up_releasepending.c
CC:  common/up_releasestack.c
CC:  armv7-m/up_reprioritizertr.c
CC:  armv7-m/up_schedulesigaction.c
CC:  armv7-m/up_sigdeliver.c
CC:  armv7-m/up_systemreset.c
CC:  armv7-m/up_unblocktask.c
CC:  common/up_usestack.c
CC:  armv7-m/up_doirq.c
CC:  armv7-m/up_hardfault.c
CC:  armv7-m/up_svcall.c
CC:  common/up_vfork.c
CC:  armv7-m/up_vectors.c
AR:  stm32_vectors.o up_saveusercontext.o up_fullcontextrestore.o up_switchcontext.o vfork.o up_exception.o stm32_allocateheap.o stm32_start.o stm32_rcc.o stm32_lse.o stm32_lsi.o stm32_gpio.o stm32_exti_gpio.o stm32_flash.o stm32_irq.o stm32_timerisr.o stm32_dma.o stm32_lowputc.o stm32_serial.o stm32_spi.o stm32_sdio.o stm32_tim.o stm32_i2c.o stm32_waste.o stm32_idle.o stm32_pmstop.o stm32_pmstandby.o stm32_pmsleep.o stm32_pminitialize.o up_assert.o up_blocktask.o up_copystate.o up_createstack.o up_mdelay.o up_udelay.o up_exit.o up_initialize.o up_initialstate.o up_interruptcontext.o up_memfault.o up_modifyreg8.o up_modifyreg16.o up_modifyreg32.o up_releasepending.o up_releasestack.o up_reprioritizertr.o up_schedulesigaction.o up_sigdeliver.o up_systemreset.o up_unblocktask.o up_usestack.o up_doirq.o up_hardfault.o up_svcall.o up_vfork.o up_vectors.o
CXX:  libxx_cxapurevirtual.cxx
CXX:  libxx_eabi_atexit.cxx
CXX:  libxx_cxa_atexit.cxx
CXX:  libxx_delete.cxx
CXX:  libxx_deletea.cxx
CXX:  libxx_new.cxx
CXX:  libxx_newa.cxx
CXX:  libxx_stdthrow.cxx
AR:    libxx_cxapurevirtual.o libxx_eabi_atexit.o libxx_cxa_atexit.o libxx_delete.o libxx_deletea.o libxx_new.o libxx_newa.o libxx_stdthrow.o
CC:  builtin.c
CC:  builtin_list.c
CC:  exec_builtin.c
AR:   builtin.o builtin_list.o exec_builtin.o
CC:  fs_close.c
CC:  fs_closedir.c
CC:  fs_dup.c
CC:  fs_dup2.c
CC:  fs_fcntl.c
CC:  fs_filedup.c
CC:  fs_filedup2.c
CC:  fs_ioctl.c
CC:  fs_lseek.c
CC:  fs_open.c
CC:  fs_opendir.c
CC:  fs_poll.c
CC:  fs_read.c
CC:  fs_readdir.c
CC:  fs_rewinddir.c
CC:  fs_seekdir.c
CC:  fs_stat.c
CC:  fs_statfs.c
CC:  fs_select.c
CC:  fs_write.c
CC:  fs_files.c
CC:  fs_foreachinode.c
CC:  fs_inode.c
CC:  fs_inodeaddref.c
CC:  fs_inodefind.c
CC:  fs_inoderelease.c
CC:  fs_inoderemove.c
CC:  fs_inodereserve.c
CC:  fs_registerdriver.c
CC:  fs_unregisterdriver.c
CC:  fs_registerblockdriver.c
CC:  fs_unregisterblockdriver.c
CC:  fs_findblockdriver.c
CC:  fs_openblockdriver.c
CC:  fs_closeblockdriver.c
CC:  mmap/fs_mmap.c
AR:   fs_close.o fs_closedir.o fs_dup.o fs_dup2.o fs_fcntl.o fs_filedup.o fs_filedup2.o fs_ioctl.o fs_lseek.o fs_open.o fs_opendir.o fs_poll.o fs_read.o fs_readdir.o fs_rewinddir.o fs_seekdir.o fs_stat.o fs_statfs.o fs_select.o fs_write.o fs_files.o fs_foreachinode.o fs_inode.o fs_inodeaddref.o fs_inodefind.o fs_inoderelease.o fs_inoderemove.o fs_inodereserve.o fs_registerdriver.o fs_unregisterdriver.o fs_registerblockdriver.o fs_unregisterblockdriver.o fs_findblockdriver.o fs_openblockdriver.o fs_closeblockdriver.o fs_mmap.o
CC:  pipes/pipe.c
CC:  pipes/fifo.c
CC:  pipes/pipe_common.c
CC:  serial/serial.c
CC:  serial/serialirq.c
CC:  serial/lowconsole.c
CC:  usbhost/hid_parser.c
CC:  dev_null.c
CC:  dev_zero.c
CC:  loop.c
AR:   pipe.o fifo.o pipe_common.o serial.o serialirq.o lowconsole.o hid_parser.o dev_null.o dev_zero.o loop.o
CC:  binfmt_globals.c
CC:  binfmt_register.c
CC:  binfmt_unregister.c
CC:  binfmt_loadmodule.c
CC:  binfmt_unloadmodule.c
CC:  binfmt_execmodule.c
CC:  binfmt_exec.c
CC:  binfmt_dumpmodule.c
CC:  symtab_findbyname.c
CC:  symtab_findbyvalue.c
CC:  symtab_findorderedbyname.c
CC:  symtab_findorderedbyvalue.c
AR:   binfmt_globals.o binfmt_register.o binfmt_unregister.o binfmt_loadmodule.o binfmt_unloadmodule.o binfmt_execmodule.o binfmt_exec.o binfmt_dumpmodule.o symtab_findbyname.o symtab_findbyvalue.o symtab_findorderedbyname.o symtab_findorderedbyvalue.o
CC:  empty.c
AR:   empty.o
make[1]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware'
make[1]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware'
Skipping submodules. NUTTX_SRC is set to /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/NuttX/nuttx/
Generating uORB topic headers
actuator_armed.h: new header file
actuator_controls.h: new header file
actuator_controls_0.h: new header file
actuator_controls_1.h: new header file
actuator_controls_2.h: new header file
actuator_controls_3.h: new header file
actuator_controls_virtual_fw.h: new header file
actuator_controls_virtual_mc.h: new header file
actuator_direct.h: new header file
actuator_outputs.h: new header file
airspeed.h: new header file
att_pos_mocap.h: new header file
battery_status.h: new header file
camera_trigger.h: new header file
control_state.h: new header file
debug_key_value.h: new header file
differential_pressure.h: new header file
distance_sensor.h: new header file
ekf2_innovations.h: new header file
ekf2_replay.h: new header file
encoders.h: new header file
esc_report.h: new header file
esc_status.h: new header file
estimator_status.h: new header file
fence.h: new header file
fence_vertex.h: new header file
filtered_bottom_flow.h: new header file
follow_target.h: new header file
fw_virtual_attitude_setpoint.h: new header file
fw_virtual_rates_setpoint.h: new header file
geofence_result.h: new header file
hil_sensor.h: new header file
home_position.h: new header file
input_rc.h: new header file
manual_control_setpoint.h: new header file
mavlink_log.h: new header file
mc_att_ctrl_status.h: new header file
mc_virtual_attitude_setpoint.h: new header file
mc_virtual_rates_setpoint.h: new header file
mission.h: new header file
mission_result.h: new header file
multirotor_motor_limits.h: new header file
navigation_capabilities.h: new header file
offboard_control_mode.h: new header file
optical_flow.h: new header file
output_pwm.h: new header file
parameter_update.h: new header file
position_setpoint.h: new header file
position_setpoint_triplet.h: new header file
pwm_input.h: new header file
qshell_req.h: new header file
rc_channels.h: new header file
rc_parameter_map.h: new header file
safety.h: new header file
satellite_info.h: new header file
sensor_accel.h: new header file
sensor_baro.h: new header file
sensor_combined.h: new header file
sensor_gyro.h: new header file
sensor_mag.h: new header file
servorail_status.h: new header file
subsystem_info.h: new header file
system_power.h: new header file
tecs_status.h: new header file
telemetry_status.h: new header file
test_motor.h: new header file
time_offset.h: new header file
uavcan_parameter_request.h: new header file
uavcan_parameter_value.h: new header file
vehicle_attitude.h: new header file
vehicle_attitude_setpoint.h: new header file
vehicle_command.h: new header file
vehicle_command_ack.h: new header file
vehicle_control_mode.h: new header file
vehicle_force_setpoint.h: new header file
vehicle_global_position.h: new header file
vehicle_global_velocity_setpoint.h: new header file
vehicle_gps_position.h: new header file
vehicle_land_detected.h: new header file
vehicle_local_position.h: new header file
vehicle_local_position_setpoint.h: new header file
vehicle_rates_setpoint.h: new header file
vehicle_status.h: new header file
vision_position_estimate.h: new header file
vtol_vehicle_status.h: new header file
wind_estimate.h: new header file
Generating multiplatform uORB topic wrapper headers
actuator_armed.h: new header file
actuator_controls.h: new header file
actuator_controls_0.h: new header file
actuator_controls_1.h: new header file
actuator_controls_2.h: new header file
actuator_controls_3.h: new header file
actuator_controls_virtual_fw.h: new header file
actuator_controls_virtual_mc.h: new header file
actuator_direct.h: new header file
actuator_outputs.h: new header file
airspeed.h: new header file
att_pos_mocap.h: new header file
battery_status.h: new header file
camera_trigger.h: new header file
control_state.h: new header file
debug_key_value.h: new header file
differential_pressure.h: new header file
distance_sensor.h: new header file
ekf2_innovations.h: new header file
ekf2_replay.h: new header file
encoders.h: new header file
esc_report.h: new header file
esc_status.h: new header file
estimator_status.h: new header file
fence.h: new header file
fence_vertex.h: new header file
filtered_bottom_flow.h: new header file
follow_target.h: new header file
fw_virtual_attitude_setpoint.h: new header file
fw_virtual_rates_setpoint.h: new header file
geofence_result.h: new header file
hil_sensor.h: new header file
home_position.h: new header file
input_rc.h: new header file
manual_control_setpoint.h: new header file
mavlink_log.h: new header file
mc_att_ctrl_status.h: new header file
mc_virtual_attitude_setpoint.h: new header file
mc_virtual_rates_setpoint.h: new header file
mission.h: new header file
mission_result.h: new header file
multirotor_motor_limits.h: new header file
navigation_capabilities.h: new header file
offboard_control_mode.h: new header file
optical_flow.h: new header file
output_pwm.h: new header file
parameter_update.h: new header file
position_setpoint.h: new header file
position_setpoint_triplet.h: new header file
pwm_input.h: new header file
qshell_req.h: new header file
rc_channels.h: new header file
rc_parameter_map.h: new header file
safety.h: new header file
satellite_info.h: new header file
sensor_accel.h: new header file
sensor_baro.h: new header file
sensor_combined.h: new header file
sensor_gyro.h: new header file
sensor_mag.h: new header file
servorail_status.h: new header file
subsystem_info.h: new header file
system_power.h: new header file
tecs_status.h: new header file
telemetry_status.h: new header file
test_motor.h: new header file
time_offset.h: new header file
uavcan_parameter_request.h: new header file
uavcan_parameter_value.h: new header file
vehicle_attitude.h: new header file
vehicle_attitude_setpoint.h: new header file
vehicle_command.h: new header file
vehicle_command_ack.h: new header file
vehicle_control_mode.h: new header file
vehicle_force_setpoint.h: new header file
vehicle_global_position.h: new header file
vehicle_global_velocity_setpoint.h: new header file
vehicle_gps_position.h: new header file
vehicle_land_detected.h: new header file
vehicle_local_position.h: new header file
vehicle_local_position_setpoint.h: new header file
vehicle_rates_setpoint.h: new header file
vehicle_status.h: new header file
vision_position_estimate.h: new header file
vtol_vehicle_status.h: new header file
wind_estimate.h: new header file
%%%%
%%%% Building px4io-v2_default in /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/
%%%%
%  PX4_BASE            = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/
%  GIT_DESC            = 
%  CONFIG              = px4io-v2_default
grep: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/nuttx-export/include/nuttx/config.h: No such file or directory
%  BOARD               = px4io-v2
%  WORK_DIR            = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/
%  NUTTX_EXPORT_DIR    = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/nuttx-export/
%  NUTTX_CONFIG_HEADER = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/nuttx-export/include/nuttx/config.h
make[2]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build'
%% Unpacking /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Archives/px4io-v2.export
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/empty.c
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4io-v2/module.mk
%  MODULE_NAME         = px4io-v2
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4io-v2/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4io-v2/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4io-v2
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4io-v2'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4io-v2/px4io_init.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4io-v2/px4io_timer_config.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4io-v2/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4io-v2'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/module.mk
%  MODULE_NAME         = stm32
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/drv_hrt.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/drv_pwm_servo.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/drv_io_timer.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/drv_input_capture.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/module.mk
%  MODULE_NAME         = px4iofirmware
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/adc.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/controls.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/px4io.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/registers.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/safety.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../../lib/rc/sbus.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../../lib/rc/dsm.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../systemlib/up_cxxinitialize.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../systemlib/perf_counter.c
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/mixer.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../systemlib/mixer/mixer.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../systemlib/mixer/mixer_group.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../systemlib/mixer/mixer_simple.cpp
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../systemlib/pwm_limit/pwm_limit.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../../lib/rc/st24.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../../lib/rc/sumd.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../../lib/rc/srxl.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/serial.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/../systemlib/hx_stream.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/px4iofirmware'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/module.mk
%  MODULE_NAME         = common
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/px4_getopt.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/module.mk
%  MODULE_NAME         = px4_layer
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/px4_nuttx_tasks.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/../../posix/px4_layer/px4_log.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer'
LINK:    /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/firmware.elf
BIN:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/firmware.bin
%% Generating /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build/firmware.px4
fatal: Could not chdir to '../../../../../../../../../../../../../../modules/PX4Firmware/src/lib/DriverFramework/dspal/test/dspal_tester/cmake_hexagon': No such file or directory
fatal: 'git status --porcelain' failed in submodule test/dspal_tester/cmake_hexagon
fatal: 'git status --porcelain' failed in submodule dspal
fatal: 'git status --porcelain' failed in submodule src/lib/DriverFramework
make[2]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4io-v2_default.build'
%% Copying /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Images/px4io-v2_default.px4
make[1]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware'
PX4IOv2 Firmware is in px4io-v2.bin
Building px4-v2
%% px4-v2
make[1]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot'
Skipping submodules. NUTTX_SRC is set to /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4NuttX/nuttx/
Generating uORB topic headers
actuator_armed.h: unchanged
actuator_controls.h: unchanged
actuator_controls_0.h: unchanged
actuator_controls_1.h: unchanged
actuator_controls_2.h: unchanged
actuator_controls_3.h: unchanged
actuator_controls_virtual_fw.h: unchanged
actuator_controls_virtual_mc.h: unchanged
actuator_direct.h: unchanged
actuator_outputs.h: unchanged
airspeed.h: unchanged
att_pos_mocap.h: unchanged
battery_status.h: unchanged
camera_trigger.h: unchanged
control_state.h: unchanged
debug_key_value.h: unchanged
differential_pressure.h: unchanged
distance_sensor.h: unchanged
ekf2_innovations.h: unchanged
ekf2_replay.h: unchanged
encoders.h: unchanged
esc_report.h: unchanged
esc_status.h: unchanged
estimator_status.h: unchanged
fence.h: unchanged
fence_vertex.h: unchanged
filtered_bottom_flow.h: unchanged
follow_target.h: unchanged
fw_virtual_attitude_setpoint.h: unchanged
fw_virtual_rates_setpoint.h: unchanged
geofence_result.h: unchanged
hil_sensor.h: unchanged
home_position.h: unchanged
input_rc.h: unchanged
manual_control_setpoint.h: unchanged
mavlink_log.h: unchanged
mc_att_ctrl_status.h: unchanged
mc_virtual_attitude_setpoint.h: unchanged
mc_virtual_rates_setpoint.h: unchanged
mission.h: unchanged
mission_result.h: unchanged
multirotor_motor_limits.h: unchanged
navigation_capabilities.h: unchanged
offboard_control_mode.h: unchanged
optical_flow.h: unchanged
output_pwm.h: unchanged
parameter_update.h: unchanged
position_setpoint.h: unchanged
position_setpoint_triplet.h: unchanged
pwm_input.h: unchanged
qshell_req.h: unchanged
rc_channels.h: unchanged
rc_parameter_map.h: unchanged
safety.h: unchanged
satellite_info.h: unchanged
sensor_accel.h: unchanged
sensor_baro.h: unchanged
sensor_combined.h: unchanged
sensor_gyro.h: unchanged
sensor_mag.h: unchanged
servorail_status.h: unchanged
subsystem_info.h: unchanged
system_power.h: unchanged
tecs_status.h: unchanged
telemetry_status.h: unchanged
test_motor.h: unchanged
time_offset.h: unchanged
uavcan_parameter_request.h: unchanged
uavcan_parameter_value.h: unchanged
vehicle_attitude.h: unchanged
vehicle_attitude_setpoint.h: unchanged
vehicle_command.h: unchanged
vehicle_command_ack.h: unchanged
vehicle_control_mode.h: unchanged
vehicle_force_setpoint.h: unchanged
vehicle_global_position.h: unchanged
vehicle_global_velocity_setpoint.h: unchanged
vehicle_gps_position.h: unchanged
vehicle_land_detected.h: unchanged
vehicle_local_position.h: unchanged
vehicle_local_position_setpoint.h: unchanged
vehicle_rates_setpoint.h: unchanged
vehicle_status.h: unchanged
vision_position_estimate.h: unchanged
vtol_vehicle_status.h: unchanged
wind_estimate.h: unchanged
Generating multiplatform uORB topic wrapper headers
actuator_armed.h: unchanged
actuator_controls.h: unchanged
actuator_controls_0.h: unchanged
actuator_controls_1.h: unchanged
actuator_controls_2.h: unchanged
actuator_controls_3.h: unchanged
actuator_controls_virtual_fw.h: unchanged
actuator_controls_virtual_mc.h: unchanged
actuator_direct.h: unchanged
actuator_outputs.h: unchanged
airspeed.h: unchanged
att_pos_mocap.h: unchanged
battery_status.h: unchanged
camera_trigger.h: unchanged
control_state.h: unchanged
debug_key_value.h: unchanged
differential_pressure.h: unchanged
distance_sensor.h: unchanged
ekf2_innovations.h: unchanged
ekf2_replay.h: unchanged
encoders.h: unchanged
esc_report.h: unchanged
esc_status.h: unchanged
estimator_status.h: unchanged
fence.h: unchanged
fence_vertex.h: unchanged
filtered_bottom_flow.h: unchanged
follow_target.h: unchanged
fw_virtual_attitude_setpoint.h: unchanged
fw_virtual_rates_setpoint.h: unchanged
geofence_result.h: unchanged
hil_sensor.h: unchanged
home_position.h: unchanged
input_rc.h: unchanged
manual_control_setpoint.h: unchanged
mavlink_log.h: unchanged
mc_att_ctrl_status.h: unchanged
mc_virtual_attitude_setpoint.h: unchanged
mc_virtual_rates_setpoint.h: unchanged
mission.h: unchanged
mission_result.h: unchanged
multirotor_motor_limits.h: unchanged
navigation_capabilities.h: unchanged
offboard_control_mode.h: unchanged
optical_flow.h: unchanged
output_pwm.h: unchanged
parameter_update.h: unchanged
position_setpoint.h: unchanged
position_setpoint_triplet.h: unchanged
pwm_input.h: unchanged
qshell_req.h: unchanged
rc_channels.h: unchanged
rc_parameter_map.h: unchanged
safety.h: unchanged
satellite_info.h: unchanged
sensor_accel.h: unchanged
sensor_baro.h: unchanged
sensor_combined.h: unchanged
sensor_gyro.h: unchanged
sensor_mag.h: unchanged
servorail_status.h: unchanged
subsystem_info.h: unchanged
system_power.h: unchanged
tecs_status.h: unchanged
telemetry_status.h: unchanged
test_motor.h: unchanged
time_offset.h: unchanged
uavcan_parameter_request.h: unchanged
uavcan_parameter_value.h: unchanged
vehicle_attitude.h: unchanged
vehicle_attitude_setpoint.h: unchanged
vehicle_command.h: unchanged
vehicle_command_ack.h: unchanged
vehicle_control_mode.h: unchanged
vehicle_force_setpoint.h: unchanged
vehicle_global_position.h: unchanged
vehicle_global_velocity_setpoint.h: unchanged
vehicle_gps_position.h: unchanged
vehicle_land_detected.h: unchanged
vehicle_local_position.h: unchanged
vehicle_local_position_setpoint.h: unchanged
vehicle_rates_setpoint.h: unchanged
vehicle_status.h: unchanged
vision_position_estimate.h: unchanged
vtol_vehicle_status.h: unchanged
wind_estimate.h: unchanged
%%%%
%%%% Building px4fmu-v2_APM in /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/
%%%%
%  PX4_BASE            = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/
%  GIT_DESC            = 
%  CONFIG              = px4fmu-v2_APM
grep: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/nuttx-export/include/nuttx/config.h: No such file or directory
%  BOARD               = px4fmu-v2
%  WORK_DIR            = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/
%  NUTTX_EXPORT_DIR    = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/nuttx-export/
%  NUTTX_CONFIG_HEADER = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/nuttx-export/include/nuttx/config.h
make[2]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build'
%% Unpacking /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Archives/px4fmu-v2.export
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/module.mk
%  MODULE_NAME         = ardupilot
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/AP_Arming.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/AP_Rally.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/AP_State.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/ArduCopter.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/ArduCopter.cpp: In member function 'void Copter::portable_logger_arming_update()':
c:/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/ArduCopter.cpp:249:124: warning: implicit conversion from 'float' to 'double' when passing argument to function [-Wdouble-promotion]
             GCS_MAVLINK::send_statustext_all(MAV_SEVERITY_INFO, "DL: neg_pulse_detected %f", ins.get_accel_peak_hold_neg_x());
                                                                                                                            ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/ArduCopter.cpp:329:124: warning: implicit conversion from 'float' to 'double' when passing argument to function [-Wdouble-promotion]
             GCS_MAVLINK::send_statustext_all(MAV_SEVERITY_INFO, "DL: pos_pulse_detected %f", ins.get_accel_peak_hold_pos_x());
                                                                                                                            ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/Attitude.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/Copter.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/GCS_Mavlink.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/Log.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/Parameters.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/UserCode.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/afs_copter.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/avoidance_adsb.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/baro_ground_effect.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/capabilities.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/commands.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/commands_logic.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/compassmot.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/compat.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_acro.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_althold.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_auto.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_autotune.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_avoid_adsb.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_brake.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_circle.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_drift.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_flip.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_guided.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_guided_nogps.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_land.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_loiter.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_poshold.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_rtl.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_sport.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_stabilize.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/control_throw.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/crash_check.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/ekf_check.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/esc_calibration.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/events.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/failsafe.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/fence.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/flight_mode.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/heli.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/heli_control_acro.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/heli_control_stabilize.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/inertia.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/land_detector.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/landing_gear.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/leds.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/motor_test.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/motors.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/navigation.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/perf_info.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/position_vector.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/precision_landing.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/radio.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/sensors.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/setup.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/switches.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/system.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/takeoff.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/terrain.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/test.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/ArduCopter/tuning.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Common/AP_Common.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Common/Location.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Common/c++.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Menu/AP_Menu.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_AdvancedFailsafe/AP_AdvancedFailsafe.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Param/AP_Param.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/StorageManager/StorageManager.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_Common.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_DeviceOp.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_Logs.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_MAVLink.cpp
In file included from c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:6:0,
                 from c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_MAVLink.cpp:31:
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h: In function 'void mavlink_quaternion_to_dcm(const float*, float (*)[3])':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h:37:21: warning: no previous declaration for 'void mavlink_quaternion_to_dcm(const float*, float (*)[3])' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_quaternion_to_dcm(const float quaternion[4], float dcm[3][3])
                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h: In function 'void mavlink_dcm_to_euler(const float (*)[3], float*, float*, float*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h:67:21: warning: no previous declaration for 'void mavlink_dcm_to_euler(const float (*)[3], float*, float*, float*)' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_dcm_to_euler(const float dcm[3][3], float* roll, float* pitch, float* yaw)
                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h: In function 'void mavlink_quaternion_to_euler(const float*, float*, float*, float*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h:101:21: warning: no previous declaration for 'void mavlink_quaternion_to_euler(const float*, float*, float*, float*)' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_quaternion_to_euler(const float quaternion[4], float* roll, float* pitch, float* yaw)
                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h: In function 'void mavlink_euler_to_quaternion(float, float, float, float*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h:117:21: warning: no previous declaration for 'void mavlink_euler_to_quaternion(float, float, float, float*)' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_euler_to_quaternion(float roll, float pitch, float yaw, float quaternion[4])
                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h: In function 'void mavlink_dcm_to_quaternion(const float (*)[3], float*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h:145:21: warning: no previous declaration for 'void mavlink_dcm_to_quaternion(const float (*)[3], float*)' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_dcm_to_quaternion(const float dcm[3][3], float quaternion[4])
                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h: In function 'void mavlink_euler_to_dcm(float, float, float, float (*)[3])':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_conversions.h:188:21: warning: no previous declaration for 'void mavlink_euler_to_dcm(float, float, float, float (*)[3])' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_euler_to_dcm(float roll, float pitch, float yaw, float dcm[3][3])
                     ^
In file included from c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:13:0,
                 from c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_MAVLink.cpp:31:
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_sha256.h: In function 'void mavlink_sha256_init(mavlink_sha256_ctx*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_sha256.h:96:21: warning: no previous declaration for 'void mavlink_sha256_init(mavlink_sha256_ctx*)' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_sha256_init(mavlink_sha256_ctx *m)
                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_sha256.h: In function 'void mavlink_sha256_update(mavlink_sha256_ctx*, const void*, uint32_t)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_sha256.h:157:21: warning: no previous declaration for 'void mavlink_sha256_update(mavlink_sha256_ctx*, const void*, uint32_t)' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_sha256_update(mavlink_sha256_ctx *m, const void *v, uint32_t len)
                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_sha256.h: In function 'void mavlink_sha256_final_48(mavlink_sha256_ctx*, uint8_t*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_sha256.h:197:21: warning: no previous declaration for 'void mavlink_sha256_final_48(mavlink_sha256_ctx*, uint8_t*)' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_sha256_final_48(mavlink_sha256_ctx *m, uint8_t result[6])
                     ^
In file included from c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_MAVLink.cpp:31:0:
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h: In function 'mavlink_message_t* mavlink_get_channel_buffer(uint8_t)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:35:35: warning: no previous declaration for 'mavlink_message_t* mavlink_get_channel_buffer(uint8_t)' [-Wmissing-declarations]
 MAVLINK_HELPER mavlink_message_t* mavlink_get_channel_buffer(uint8_t chan)
                                   ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h: In function 'uint8_t mavlink_sign_packet(mavlink_signing_t*, uint8_t*, const uint8_t*, uint8_t, const uint8_t*, uint8_t, const uint8_t*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:60:24: warning: no previous declaration for 'uint8_t mavlink_sign_packet(mavlink_signing_t*, uint8_t*, const uint8_t*, uint8_t, const uint8_t*, uint8_t, const uint8_t*)' [-Wmissing-declarations]
 MAVLINK_HELPER uint8_t mavlink_sign_packet(mavlink_signing_t *signing,
                        ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h: In function 'uint8_t _mav_trim_payload(const char*, uint8_t)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:95:24: warning: no previous declaration for 'uint8_t _mav_trim_payload(const char*, uint8_t)' [-Wmissing-declarations]
 MAVLINK_HELPER uint8_t _mav_trim_payload(const char *payload, uint8_t length)
                        ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h: In function 'bool mavlink_signature_check(mavlink_signing_t*, mavlink_signing_streams_t*, const mavlink_message_t*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:106:21: warning: no previous declaration for 'bool mavlink_signature_check(mavlink_signing_t*, mavlink_signing_streams_t*, const mavlink_message_t*)' [-Wmissing-declarations]
 MAVLINK_HELPER bool mavlink_signature_check(mavlink_signing_t *signing,
                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h: In function 'uint8_t mavlink_get_crc_extra(const mavlink_message_t*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:504:24: warning: no previous declaration for 'uint8_t mavlink_get_crc_extra(const mavlink_message_t*)' [-Wmissing-declarations]
 MAVLINK_HELPER uint8_t mavlink_get_crc_extra(const mavlink_message_t *msg)
                        ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h: In function 'uint8_t mavlink_expected_message_length(const mavlink_message_t*)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:514:24: warning: no previous declaration for 'uint8_t mavlink_expected_message_length(const mavlink_message_t*)' [-Wmissing-declarations]
 MAVLINK_HELPER uint8_t mavlink_expected_message_length(const mavlink_message_t *msg)
                        ^
In file included from c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_MAVLink.cpp:31:0:
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h: In function 'void mavlink_set_proto_version(uint8_t, unsigned int)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:870:21: warning: no previous declaration for 'void mavlink_set_proto_version(uint8_t, unsigned int)' [-Wmissing-declarations]
 MAVLINK_HELPER void mavlink_set_proto_version(uint8_t chan, unsigned int version)
                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h: In function 'unsigned int mavlink_get_proto_version(uint8_t)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/Build.ArduCopter/libraries/GCS_MAVLink/include/mavlink/v2.0/mavlink_helpers.h:885:29: warning: no previous declaration for 'unsigned int mavlink_get_proto_version(uint8_t)' [-Wmissing-declarations]
 MAVLINK_HELPER unsigned int mavlink_get_proto_version(uint8_t chan)
                             ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_Signing.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/GCS_serial_control.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/GCS_MAVLink/MAVLink_routing.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_SerialManager/AP_SerialManager.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_ERB.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_ERB.cpp: In member function 'bool AP_GPS_ERB::_parse_gps()':
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_ERB.cpp:157:65: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
         state.location.lng    = (int32_t)(_buffer.pos.longitude * 1e7);
                                                                 ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_ERB.cpp:158:64: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
         state.location.lat    = (int32_t)(_buffer.pos.latitude * 1e7);
                                                                ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_ERB.cpp:159:68: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
         state.location.alt    = (int32_t)(_buffer.pos.altitude_msl * 1e2);
                                                                    ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_GSOF.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_GSOF.cpp: In member function 'bool AP_GPS_GSOF::process_message()':
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_GSOF.cpp:297:66: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
                 state.location.lat = (int32_t)(RAD_TO_DEG_DOUBLE * (SwapDouble(gsof_msg.data, a)) * 1e7);
                                                                  ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_GSOF.cpp:297:99: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
                 state.location.lat = (int32_t)(RAD_TO_DEG_DOUBLE * (SwapDouble(gsof_msg.data, a)) * 1e7);
                                                                                                   ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_GSOF.cpp:298:66: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
                 state.location.lng = (int32_t)(RAD_TO_DEG_DOUBLE * (SwapDouble(gsof_msg.data, a + 8)) * 1e7);
                                                                  ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_GSOF.cpp:298:103: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
                 state.location.lng = (int32_t)(RAD_TO_DEG_DOUBLE * (SwapDouble(gsof_msg.data, a + 8)) * 1e7);
                                                                                                       ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_GSOF.cpp:299:82: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
                 state.location.alt = (int32_t)(SwapDouble(gsof_msg.data, a + 16) * 1e2);
                                                                                  ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_MAV.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_MTK.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_MTK19.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_NMEA.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_NOVA.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_NOVA.cpp: In member function 'bool AP_GPS_NOVA::process_message()':
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_NOVA.cpp:199:53: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
         state.location.lat = (int32_t) (bestposu.lat*1e7);
                                                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_NOVA.cpp:200:53: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
         state.location.lng = (int32_t) (bestposu.lng*1e7);
                                                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_NOVA.cpp:201:53: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
         state.location.alt = (int32_t) (bestposu.hgt*1e2);
                                                     ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_PX4.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_QURT.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBF.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBF.cpp: In member function 'bool AP_GPS_SBF::process_message()':
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBF.cpp:239:58: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
             state.location.lat = (int32_t)(temp.Latitude * RAD_TO_DEG_DOUBLE * 1e7);
                                                          ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBF.cpp:239:78: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
             state.location.lat = (int32_t)(temp.Latitude * RAD_TO_DEG_DOUBLE * 1e7);
                                                                              ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBF.cpp:240:59: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
             state.location.lng = (int32_t)(temp.Longitude * RAD_TO_DEG_DOUBLE * 1e7);
                                                           ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBF.cpp:240:79: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
             state.location.lng = (int32_t)(temp.Longitude * RAD_TO_DEG_DOUBLE * 1e7);
                                                                               ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBP.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBP.cpp: In member function 'bool AP_GPS_SBP::_attempt_state_update()':
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBP.cpp:278:58: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
         state.location.lat      = (int32_t) (pos_llh->lat*1e7);
                                                          ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBP.cpp:279:58: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
         state.location.lng      = (int32_t) (pos_llh->lon*1e7);
                                                          ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SBP.cpp:280:61: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
         state.location.alt      = (int32_t) (pos_llh->height*1e2);
                                                             ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_SIRF.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/AP_GPS_UBLOX.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_GPS/GPS_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/DataFlash/DFMessageWriter.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/DataFlash/DataFlash.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/DataFlash/DataFlash_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/DataFlash/DataFlash_Block.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/DataFlash/DataFlash_File.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/DataFlash/DataFlash_MAVLink.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/DataFlash/DataFlash_SITL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/DataFlash/LogFile.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_ADC/AP_ADC.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_ADC/AP_ADC_ADS1115.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Baro/AP_Baro.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Baro/AP_Baro_BMP085.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Baro/AP_Baro_BMP280.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Baro/AP_Baro_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Baro/AP_Baro_HIL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Baro/AP_Baro_MS5611.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Baro/AP_Baro_PX4.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Baro/AP_Baro_QURT.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Baro/AP_Baro_qflight.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_AK09916.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_AK8963.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_BMM150.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_Calibration.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_HIL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_HMC5843.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_IST8310.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_LIS3MDL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_LSM303D.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_LSM9DS1.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_PX4.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_QURT.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/AP_Compass_qflight.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/CompassCalibrator.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Compass/Compass_learn.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/AP_GeodesicGrid.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/AP_Math.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/crc.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/edc.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp: In function 'void wgsllh2ecef(const Vector3d&, Vector3d&)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:205:32: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   double N = WGS84_A / sqrt(1. - d*d);
                                ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:205:22: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   double N = WGS84_A / sqrt(1. - d*d);
                      ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp: In function 'void wgsecef2llh(const Vector3d&, Vector3d&)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:225:9: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   if (p < WGS84_A*1e-16) {
         ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:227:28: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
     llh[2] = fabs(ecef[2]) - WGS84_B;
                            ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:232:22: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   const double P = p / WGS84_A;
                      ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:233:30: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   const double e_c = sqrt(1. - WGS84_E*WGS84_E);
                              ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:234:40: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   const double Z = fabs(ecef[2]) * e_c / WGS84_A;
                                        ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:256:14: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
     B_n = 1.5*WGS84_E*S*C*C*(A_n*(P*S - Z*C) - WGS84_E*S*C);
              ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:292:26: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
     if (fabs(S - prev_S) < 1e-16 && fabs(C - prev_C) < 1e-16) {
                          ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:292:54: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
     if (fabs(S - prev_S) < 1e-16 && fabs(C - prev_C) < 1e-16) {
                                                      ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/location.cpp:302:48: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   llh[2] = (p*e_c*C + fabs(ecef[2])*S - WGS84_A*e_c*A_n) / sqrt(e_c*e_c*C*C + S*S);
                                                ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/matrix3.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/matrix_alg.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/polygon.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/quaternion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/vector2.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/vector3.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/vector3.cpp: In instantiation of 'float Vector3<T>::angle(const Vector3<T>&) const [with T = double]':
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/vector3.cpp:439:65:   required from here
c:/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Math/vector3.cpp:367:31: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
     float cosv = ((*this)*v2) / len;
                               ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_BMI160.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_HIL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_Invensense.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_L3G4200D.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_LSM9DS0.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_PX4.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_QURT.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_SITL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_UserInteract_MAVLink.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_UserInteract_Stream.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_qflight.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialSensor/AuxiliaryBus.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_AccelCal/AP_AccelCal.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_AccelCal/AccelCalibrator.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_AHRS/AP_AHRS.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_AHRS/AP_AHRS_DCM.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_AHRS/AP_AHRS_NavEKF.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_AirDataFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_Control.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_MagFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_Measurements.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_OptFlowFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_Outputs.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_PosVelFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_RngBcnFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_VehicleStatus.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF2_core.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF2/AP_NavEKF_GyroBias.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_AirDataFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_Control.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_GyroBias.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_MagFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_Measurements.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_OptFlowFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_Outputs.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_PosVelFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_RngBcnFusion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_VehicleStatus.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_core.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mission/AP_Mission.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Rally/AP_Rally.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PID/AC_HELI_PID.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PID/AC_P.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PID/AC_PID.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PID/AC_PI_2D.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_AttitudeControl/AC_AttitudeControl.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_AttitudeControl/AC_AttitudeControl_Heli.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_AttitudeControl/AC_AttitudeControl_Multi.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_AttitudeControl/AC_PosControl.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_AttitudeControl/ControlMonitor.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/RC_Channel/RC_Channel.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Motors/AP_MotorsCoax.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Motors/AP_MotorsHeli.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Motors/AP_MotorsHeli_RSC.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Motors/AP_MotorsHeli_Single.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Motors/AP_MotorsMatrix.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Motors/AP_MotorsMulticopter.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Motors/AP_MotorsSingle.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Motors/AP_MotorsTri.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Motors/AP_Motors_Class.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_BBB_PRU.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_Bebop.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_LeddarOne.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_LightWareI2C.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_LightWareSerial.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_MAVLink.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_MaxsonarI2CXL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_MaxsonarSerialLV.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_PX4_PWM.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_PulsedLightLRF.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_analog.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_trone.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_uLanding.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/RangeFinder.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RangeFinder/RangeFinder_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_OpticalFlow/AP_OpticalFlow_Onboard.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_OpticalFlow/AP_OpticalFlow_PX4Flow.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_OpticalFlow/AP_OpticalFlow_Pixart.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_OpticalFlow/AP_OpticalFlow_SITL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_OpticalFlow/OpticalFlow.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_OpticalFlow/OpticalFlow_backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RSSI/AP_RSSI.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/Filter/DerivativeFilter.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/Filter/LowPassFilter.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/Filter/LowPassFilter2p.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Relay/AP_Relay.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_ServoRelayEvents/AP_ServoRelayEvents.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Camera/AP_Camera.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/AP_Mount.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/AP_Mount_Alexmos.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/AP_Mount_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/AP_Mount_SToRM32.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/AP_Mount_SToRM32_serial.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/AP_Mount_Servo.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/AP_Mount_SoloGimbal.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/SoloGimbal.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/SoloGimbalEKF.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Mount/SoloGimbal_Parameters.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Airspeed/AP_Airspeed.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Airspeed/AP_Airspeed_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Airspeed/AP_Airspeed_MS4525.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Airspeed/AP_Airspeed_MS5525.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Airspeed/AP_Airspeed_analog.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Airspeed/Airspeed_Calibration.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_InertialNav/AP_InertialNav_NavEKF.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_WPNav/AC_Circle.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_WPNav/AC_WPNav.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Declination/AP_Declination.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_Fence/AC_Fence.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_Fence/AC_PolyFence_loader.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_Avoidance/AC_Avoid.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Scheduler/AP_Scheduler.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RCMapper/AP_RCMapper.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/AP_BoardLED.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/AP_Notify.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/Buzzer.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/DiscoLED.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/DiscreteRGBLed.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/Display.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/Display_SH1106_I2C.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/Display_SSD1306_I2C.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/ExternalLED.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/NavioLED.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/NavioLED_I2C.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/OreoLED_PX4.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/PixRacerLED.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/RCOutputRGBLed.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/RGBLed.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/ToneAlarm_Linux.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/ToneAlarm_PX4.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/ToneAlarm_PX4_Solo.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/ToshibaLED.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/ToshibaLED_I2C.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Notify/VRBoard_LED.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_BattMonitor/AP_BattMonitor.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_BattMonitor/AP_BattMonitor_Analog.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_BattMonitor/AP_BattMonitor_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_BattMonitor/AP_BattMonitor_Bebop.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_BattMonitor/AP_BattMonitor_SMBus_I2C.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_BattMonitor/AP_BattMonitor_SMBus_PX4.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_BoardConfig/AP_BoardConfig.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_BoardConfig/px4_drivers.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Frsky_Telem/AP_Frsky_Telem.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_Sprayer/AC_Sprayer.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Parachute/AP_Parachute.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_LandingGear/AP_LandingGear.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Terrain/AP_Terrain.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Terrain/TerrainGCS.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Terrain/TerrainIO.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Terrain/TerrainMission.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Terrain/TerrainUtil.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RPM/AP_RPM.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RPM/RPM_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RPM/RPM_PX4_PWM.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_RPM/RPM_SITL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PrecLand/AC_PrecLand.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PrecLand/AC_PrecLand_Companion.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PrecLand/AC_PrecLand_IRLock.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PrecLand/AC_PrecLand_SITL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PrecLand/AC_PrecLand_SITL_Gazebo.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_PrecLand/PosVelEKF.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_IRLock/AP_IRLock_I2C.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_IRLock/AP_IRLock_SITL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_IRLock/IRLock.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_InputManager/AC_InputManager.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AC_InputManager/AC_InputManager_Heli.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_ADSB/AP_ADSB.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Avoidance/AP_Avoidance.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Proximity/AP_Proximity.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Proximity/AP_Proximity_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Proximity/AP_Proximity_LightWareSF40C.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Proximity/AP_Proximity_MAV.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Proximity/AP_Proximity_SITL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Stats/AP_Stats.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Gripper/AP_Gripper.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Gripper/AP_Gripper_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Gripper/AP_Gripper_EPM.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Gripper/AP_Gripper_Servo.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Beacon/AP_Beacon.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Beacon/AP_Beacon_Backend.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Beacon/AP_Beacon_Pozyx.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Beacon/AP_Beacon_SITL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Arming/AP_Arming.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Module/AP_Module.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_Button/AP_Button.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_ICEngine/AP_ICEngine.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_FlashStorage/AP_FlashStorage.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/SRV_Channel/SRV_Channel.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/SRV_Channel/SRV_Channel_aux.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/Device.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/HAL.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/UARTDriver.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/Util.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/AnalogIn.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/GPIO.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/HAL_Empty_Class.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/PrivateMember.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/RCInput.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/RCOutput.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/Scheduler.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/Semaphores.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/Storage.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_Empty/UARTDriver.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/AnalogIn.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/Device.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/GPIO.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/HAL_PX4_Class.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/I2CDevice.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/NSHShellStream.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/RCInput.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/RCOutput.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/SPIDevice.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/Scheduler.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/Semaphores.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/Storage.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/UARTDriver.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/Util.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/px4_param.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL_PX4/system.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/Print.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/RingBuffer.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/Socket.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/dsm.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/ftoa_engine.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/getopt_cpp.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/print_vprintf.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/srxl.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/st24.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/sumd.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/libraries/AP_HAL/utility/utoa_invert.cpp
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/module.pre.o
CMD:     ArduPilot
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/module.mk
%  MODULE_NAME         = batt_smbus
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/batt_smbus.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/batt_smbus.cpp: In member function 'virtual int BATT_SMBUS::test()':
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/batt_smbus.cpp:305:89: warning: implicit conversion from 'float' to 'double' when passing argument to function [-Wdouble-promotion]
           (float)status.discharged_mah, (int)_batt_capacity, (int)status.is_powering_off);
                                                                                         ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/batt_smbus.cpp:305:89: warning: implicit conversion from 'float' to 'double' when passing argument to function [-Wdouble-promotion]
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/batt_smbus.cpp:305:89: warning: implicit conversion from 'float' to 'double' when passing argument to function [-Wdouble-promotion]
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/module.pre.o
CMD:     batt_smbus
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/module.mk
%  MODULE_NAME         = px4fmu-v2
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/px4fmu_can.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/px4fmu2_init.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/px4fmu_timer_config.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/px4fmu_spi.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/px4fmu_usb.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/px4fmu2_led.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/module.mk
%  MODULE_NAME         = device
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/device_nuttx.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/integrator.cpp
In file included from c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/lib/mathlib/mathlib.h:46:0,
                 from c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/integrator.h:44,
                 from c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/integrator.cpp:42:
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/lib/mathlib/math/Quaternion.hpp: In member function 'void math::Quaternion::from_euler(float, float, float)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/lib/mathlib/math/Quaternion.hpp:198:38: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   double cosPhi_2 = cos(double(roll) / 2.0);
                                      ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/lib/mathlib/math/Quaternion.hpp:199:38: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   double sinPhi_2 = sin(double(roll) / 2.0);
                                      ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/lib/mathlib/math/Quaternion.hpp:200:41: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   double cosTheta_2 = cos(double(pitch) / 2.0);
                                         ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/lib/mathlib/math/Quaternion.hpp:201:41: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   double sinTheta_2 = sin(double(pitch) / 2.0);
                                         ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/lib/mathlib/math/Quaternion.hpp:202:37: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   double cosPsi_2 = cos(double(yaw) / 2.0);
                                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/lib/mathlib/math/Quaternion.hpp:203:37: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
   double sinPsi_2 = sin(double(yaw) / 2.0);
                                     ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/integrator.cpp: In member function 'bool Integrator::put(uint64_t, math::Vector<3u>&, math::Vector<3u>&, uint64_t&)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/integrator.cpp:77:54: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
  double dt = (double)(timestamp - _last_integration) / 1000000.0;
                                                      ^
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/cdev.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/i2c_nuttx.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/pio.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/spi.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/ringbuffer.cpp
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led/module.mk
%  MODULE_NAME         = led
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led/led.cpp
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl/module.mk
%  MODULE_NAME         = mkblctrl
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl/mkblctrl.cpp
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl/mkblctrl_params.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl/module.pre.o
CMD:     mkblctrl
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/module.mk
%  MODULE_NAME         = pwm_input
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/pwm_input.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/pwm_input.cpp: In constructor 'PWMIN::PWMIN()':
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/pwm_input.cpp:267:17: warning: 'PWMIN::_perf_read' will be initialized after [-Wreorder]
  perf_counter_t _perf_read;
                 ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/pwm_input.cpp:266:17: warning:   'perf_ctr_header* PWMIN::_perf_interrupt' [-Wreorder]
  perf_counter_t _perf_interrupt;
                 ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/pwm_input.cpp:280:1: warning:   when initialized here [-Wreorder]
 PWMIN::PWMIN() :
 ^
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/module.pre.o
CMD:     pwm_input
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/module.mk
%  MODULE_NAME         = px4fmu
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/fmu.cpp
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/../../lib/rc/sbus.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/../../lib/rc/dsm.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/../../lib/rc/st24.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/../../lib/rc/sumd.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/../../lib/rc/srxl.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/px4fmu_params.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/module.pre.o
CMD:     fmu
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/module.mk
%  MODULE_NAME         = px4io
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/px4io.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/px4io_uploader.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/px4io_serial.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/px4io_i2c.cpp
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/px4io_params.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/module.pre.o
CMD:     px4io
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/module.mk
%  MODULE_NAME         = stm32
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/drv_hrt.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/drv_pwm_servo.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/drv_io_timer.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/drv_input_capture.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc/module.mk
%  MODULE_NAME         = adc
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc/adc.cpp
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc/module.pre.o
CMD:     adc
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm/module.mk
%  MODULE_NAME         = tone_alarm
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm/tone_alarm.cpp
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm/module.pre.o
CMD:     tone_alarm
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/module.mk
%  MODULE_NAME         = systemlib
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/perf_counter.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/conversions.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/cpuload.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/getopt_long.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/pid/pid.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/airspeed.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mavlink_log.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/rc_check.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/otp.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/board_serial.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/pwm_limit/pwm_limit.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mcu_version.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/bson/tinybson.c
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/circuit_breaker.cpp
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/printload.c
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/printload.c: In function 'print_load':
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/printload.c:220:27: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
      (double)curr_time_us / 1000000.d,
                           ^
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/printload.c:221:27: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
      (double)idle_time_us / 1000000.d,
                           ^
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/git_version.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/err.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/up_cxxinitialize.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/hx_stream.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/module.mk
%  MODULE_NAME         = mixer
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/mixer.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/mixer_group.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/mixer_simple.cpp
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/mixer_load.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/module.mk
%  MODULE_NAME         = uORB
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/uORBDevices_nuttx.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/uORBTest_UnitTest.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/uORBManager_nuttx.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/objects_common.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/Publication.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/Subscription.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/uORBUtils.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/uORB.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/uORBMain.cpp
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/module.pre.o
CMD:     uorb
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/module.mk
Running from the source directory
%  MODULE_NAME         = uavcan
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/uavcan_main.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/uavcan_servers.cpp
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/uavcan_params.c
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/actuators/esc.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/actuators/hardpoint.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/sensors/sensor_bridge.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/sensors/gnss.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/sensors/mag.cpp
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/sensors/baro.cpp
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/sensors/baro.cpp: In member function 'void UavcanBarometerBridge::air_pressure_sub_cb(const uavcan::ReceivedDataStructure<uavcan::equipment::air_data::StaticPressure_<0> >&)':
c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/sensors/baro.cpp:177:47: warning: implicit conversion from 'float' to 'double' to match other operand of binary expression [-Wdouble-promotion]
  const double p = double(msg.static_pressure) / 1000.0; // measured pressure in kPa
                                               ^
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/module.pre.o
CMD:     uavcan
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/module.mk
%  MODULE_NAME         = common
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/px4_getopt.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/module.mk
%  MODULE_NAME         = px4_layer
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/px4_nuttx_tasks.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/../../posix/px4_layer/px4_log.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update/module.mk
%  MODULE_NAME         = bl_update
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update/bl_update.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update/module.pre.o
CMD:     bl_update
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer/module.mk
%  MODULE_NAME         = mixer
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer'
CXX:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer/mixer.cpp
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer/module.pre.o
CMD:     mixer
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd/module.mk
%  MODULE_NAME         = mtd
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd/mtd.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd/24xxxx_mtd.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd/module.pre.o
CMD:     mtd
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm/module.mk
%  MODULE_NAME         = nshterm
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm/nshterm.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm/module.pre.o
CMD:     nshterm
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf/module.mk
%  MODULE_NAME         = perf
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf/perf.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf/module.pre.o
CMD:     perf
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot/module.mk
%  MODULE_NAME         = reboot
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot/reboot.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot/module.pre.o
CMD:     reboot
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top/module.mk
%  MODULE_NAME         = top
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top/top.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top/module.pre.o
CMD:     top
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected/module.mk
%  MODULE_NAME         = usb_connected
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected/usb_connected.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected/module.pre.o
CMD:     usb_connected
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver/module.mk
%  MODULE_NAME         = ver
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver/ver.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver/module.pre.o
CMD:     ver
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver'
CMDS:    /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/builtin_commands.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/builtin_commands.c
Pruning ROMFS files.
ROMFS:   romfs.img
OBJ:     romfs.o
CC:      romfs.o.c
CC:      romfs.o.c
LINK:    /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/firmware.elf
BIN:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/firmware.bin
%% Generating /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/firmware.px4
fatal: Could not chdir to '../../../../../../../../../../../../../../modules/PX4Firmware/src/lib/DriverFramework/dspal/test/dspal_tester/cmake_hexagon': No such file or directory
fatal: 'git status --porcelain' failed in submodule test/dspal_tester/cmake_hexagon
fatal: 'git status --porcelain' failed in submodule dspal
fatal: 'git status --porcelain' failed in submodule src/lib/DriverFramework
make[2]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build'
%% Copying /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Images/px4fmu-v2_APM.px4
make[1]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot'
   text	   data	    bss	    dec	    hex	filename
1020300	   2844	  56820	1079964	 107a9c	c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/firmware.elf
fatal: Not a git repository: c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/../../.git/modules/modules/PX4Firmware
fatal: Not a git repository: c:/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4NuttX/nuttx//../../.git/modules/modules/PX4NuttX
Failed to get px4 hash
Failed to get nuttx hash
PX4 ArduCopter Firmware is in ArduCopter-v2.px4
%% px4-v2-upload
make[1]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot'
Skipping submodules. NUTTX_SRC is set to /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4NuttX/nuttx/
Generating uORB topic headers
actuator_armed.h: unchanged
actuator_controls.h: unchanged
actuator_controls_0.h: unchanged
actuator_controls_1.h: unchanged
actuator_controls_2.h: unchanged
actuator_controls_3.h: unchanged
actuator_controls_virtual_fw.h: unchanged
actuator_controls_virtual_mc.h: unchanged
actuator_direct.h: unchanged
actuator_outputs.h: unchanged
airspeed.h: unchanged
att_pos_mocap.h: unchanged
battery_status.h: unchanged
camera_trigger.h: unchanged
control_state.h: unchanged
debug_key_value.h: unchanged
differential_pressure.h: unchanged
distance_sensor.h: unchanged
ekf2_innovations.h: unchanged
ekf2_replay.h: unchanged
encoders.h: unchanged
esc_report.h: unchanged
esc_status.h: unchanged
estimator_status.h: unchanged
fence.h: unchanged
fence_vertex.h: unchanged
filtered_bottom_flow.h: unchanged
follow_target.h: unchanged
fw_virtual_attitude_setpoint.h: unchanged
fw_virtual_rates_setpoint.h: unchanged
geofence_result.h: unchanged
hil_sensor.h: unchanged
home_position.h: unchanged
input_rc.h: unchanged
manual_control_setpoint.h: unchanged
mavlink_log.h: unchanged
mc_att_ctrl_status.h: unchanged
mc_virtual_attitude_setpoint.h: unchanged
mc_virtual_rates_setpoint.h: unchanged
mission.h: unchanged
mission_result.h: unchanged
multirotor_motor_limits.h: unchanged
navigation_capabilities.h: unchanged
offboard_control_mode.h: unchanged
optical_flow.h: unchanged
output_pwm.h: unchanged
parameter_update.h: unchanged
position_setpoint.h: unchanged
position_setpoint_triplet.h: unchanged
pwm_input.h: unchanged
qshell_req.h: unchanged
rc_channels.h: unchanged
rc_parameter_map.h: unchanged
safety.h: unchanged
satellite_info.h: unchanged
sensor_accel.h: unchanged
sensor_baro.h: unchanged
sensor_combined.h: unchanged
sensor_gyro.h: unchanged
sensor_mag.h: unchanged
servorail_status.h: unchanged
subsystem_info.h: unchanged
system_power.h: unchanged
tecs_status.h: unchanged
telemetry_status.h: unchanged
test_motor.h: unchanged
time_offset.h: unchanged
uavcan_parameter_request.h: unchanged
uavcan_parameter_value.h: unchanged
vehicle_attitude.h: unchanged
vehicle_attitude_setpoint.h: unchanged
vehicle_command.h: unchanged
vehicle_command_ack.h: unchanged
vehicle_control_mode.h: unchanged
vehicle_force_setpoint.h: unchanged
vehicle_global_position.h: unchanged
vehicle_global_velocity_setpoint.h: unchanged
vehicle_gps_position.h: unchanged
vehicle_land_detected.h: unchanged
vehicle_local_position.h: unchanged
vehicle_local_position_setpoint.h: unchanged
vehicle_rates_setpoint.h: unchanged
vehicle_status.h: unchanged
vision_position_estimate.h: unchanged
vtol_vehicle_status.h: unchanged
wind_estimate.h: unchanged
Generating multiplatform uORB topic wrapper headers
actuator_armed.h: unchanged
actuator_controls.h: unchanged
actuator_controls_0.h: unchanged
actuator_controls_1.h: unchanged
actuator_controls_2.h: unchanged
actuator_controls_3.h: unchanged
actuator_controls_virtual_fw.h: unchanged
actuator_controls_virtual_mc.h: unchanged
actuator_direct.h: unchanged
actuator_outputs.h: unchanged
airspeed.h: unchanged
att_pos_mocap.h: unchanged
battery_status.h: unchanged
camera_trigger.h: unchanged
control_state.h: unchanged
debug_key_value.h: unchanged
differential_pressure.h: unchanged
distance_sensor.h: unchanged
ekf2_innovations.h: unchanged
ekf2_replay.h: unchanged
encoders.h: unchanged
esc_report.h: unchanged
esc_status.h: unchanged
estimator_status.h: unchanged
fence.h: unchanged
fence_vertex.h: unchanged
filtered_bottom_flow.h: unchanged
follow_target.h: unchanged
fw_virtual_attitude_setpoint.h: unchanged
fw_virtual_rates_setpoint.h: unchanged
geofence_result.h: unchanged
hil_sensor.h: unchanged
home_position.h: unchanged
input_rc.h: unchanged
manual_control_setpoint.h: unchanged
mavlink_log.h: unchanged
mc_att_ctrl_status.h: unchanged
mc_virtual_attitude_setpoint.h: unchanged
mc_virtual_rates_setpoint.h: unchanged
mission.h: unchanged
mission_result.h: unchanged
multirotor_motor_limits.h: unchanged
navigation_capabilities.h: unchanged
offboard_control_mode.h: unchanged
optical_flow.h: unchanged
output_pwm.h: unchanged
parameter_update.h: unchanged
position_setpoint.h: unchanged
position_setpoint_triplet.h: unchanged
pwm_input.h: unchanged
qshell_req.h: unchanged
rc_channels.h: unchanged
rc_parameter_map.h: unchanged
safety.h: unchanged
satellite_info.h: unchanged
sensor_accel.h: unchanged
sensor_baro.h: unchanged
sensor_combined.h: unchanged
sensor_gyro.h: unchanged
sensor_mag.h: unchanged
servorail_status.h: unchanged
subsystem_info.h: unchanged
system_power.h: unchanged
tecs_status.h: unchanged
telemetry_status.h: unchanged
test_motor.h: unchanged
time_offset.h: unchanged
uavcan_parameter_request.h: unchanged
uavcan_parameter_value.h: unchanged
vehicle_attitude.h: unchanged
vehicle_attitude_setpoint.h: unchanged
vehicle_command.h: unchanged
vehicle_command_ack.h: unchanged
vehicle_control_mode.h: unchanged
vehicle_force_setpoint.h: unchanged
vehicle_global_position.h: unchanged
vehicle_global_velocity_setpoint.h: unchanged
vehicle_gps_position.h: unchanged
vehicle_land_detected.h: unchanged
vehicle_local_position.h: unchanged
vehicle_local_position_setpoint.h: unchanged
vehicle_rates_setpoint.h: unchanged
vehicle_status.h: unchanged
vision_position_estimate.h: unchanged
vtol_vehicle_status.h: unchanged
wind_estimate.h: unchanged
%%%%
%%%% Building px4fmu-v2_APM in /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/
%%%%
%  PX4_BASE            = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/
%  GIT_DESC            = 
%  CONFIG              = px4fmu-v2_APM
%  BOARD               = px4fmu-v2
%  WORK_DIR            = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/
%  NUTTX_EXPORT_DIR    = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/nuttx-export/
%  NUTTX_CONFIG_HEADER = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/nuttx-export/include/nuttx/config.h
make[2]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/module.mk
%  MODULE_NAME         = ardupilot
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot'
CMD:     ArduPilot
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/module.mk
%  MODULE_NAME         = batt_smbus
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus'
CMD:     batt_smbus
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/batt_smbus'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/module.mk
%  MODULE_NAME         = px4fmu-v2
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2'
make[3]: Nothing to be done for `module'.
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/boards/px4fmu-v2'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/module.mk
%  MODULE_NAME         = device
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device'
make[3]: Nothing to be done for `module'.
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/device'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led/module.mk
%  MODULE_NAME         = led
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led'
make[3]: Nothing to be done for `module'.
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/led'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl/module.mk
%  MODULE_NAME         = mkblctrl
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl'
CMD:     mkblctrl
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/mkblctrl'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/module.mk
%  MODULE_NAME         = pwm_input
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input'
CMD:     pwm_input
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/pwm_input'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/module.mk
%  MODULE_NAME         = px4fmu
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu'
CMD:     fmu
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4fmu'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/module.mk
%  MODULE_NAME         = px4io
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io'
CMD:     px4io
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/px4io'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/module.mk
%  MODULE_NAME         = stm32
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32'
make[3]: Nothing to be done for `module'.
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc/module.mk
%  MODULE_NAME         = adc
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc'
CMD:     adc
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/adc'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm/module.mk
%  MODULE_NAME         = tone_alarm
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm'
CMD:     tone_alarm
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/drivers/stm32/tone_alarm'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/module.mk
%  MODULE_NAME         = systemlib
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib'
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/git_version.c
PRELINK: /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/module.pre.o
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/module.mk
%  MODULE_NAME         = mixer
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer'
make[3]: Nothing to be done for `module'.
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/systemlib/mixer'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/module.mk
%  MODULE_NAME         = uORB
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB'
CMD:     uorb
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uORB'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/module.mk
Running from the source directory
%  MODULE_NAME         = uavcan
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan'
CMD:     uavcan
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/modules/uavcan'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/module.mk
%  MODULE_NAME         = common
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common'
make[3]: Nothing to be done for `module'.
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/common'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/module.mk
%  MODULE_NAME         = px4_layer
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer'
make[3]: Nothing to be done for `module'.
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/platforms/nuttx/px4_layer'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update/module.mk
%  MODULE_NAME         = bl_update
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update'
CMD:     bl_update
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/bl_update'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer/module.mk
%  MODULE_NAME         = mixer
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer'
CMD:     mixer
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mixer'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd/module.mk
%  MODULE_NAME         = mtd
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd'
CMD:     mtd
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/mtd'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm/module.mk
%  MODULE_NAME         = nshterm
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm'
CMD:     nshterm
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/nshterm'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf/module.mk
%  MODULE_NAME         = perf
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf'
CMD:     perf
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/perf'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot/module.mk
%  MODULE_NAME         = reboot
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot'
CMD:     reboot
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/reboot'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top/module.mk
%  MODULE_NAME         = top
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top'
CMD:     top
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/top'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected/module.mk
%  MODULE_NAME         = usb_connected
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected'
CMD:     usb_connected
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/usb_connected'
%% MODULE_MK           = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver/module.mk
%  MODULE_NAME         = ver
%  MODULE_SRC          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver/
%  MODULE_OBJ          = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver/module.pre.o
%  MODULE_WORK_DIR     = /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build//c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver'
CMD:     ver
make[3]: Leaving directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/src/systemcmds/ver'
CMDS:    /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/builtin_commands.c
CC:      /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/builtin_commands.c
LINK:    /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/firmware.elf
BIN:     /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/firmware.bin
%% Generating /c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build/firmware.px4
fatal: Could not chdir to '../../../../../../../../../../../../../../modules/PX4Firmware/src/lib/DriverFramework/dspal/test/dspal_tester/cmake_hexagon': No such file or directory
fatal: 'git status --porcelain' failed in submodule test/dspal_tester/cmake_hexagon
fatal: 'git status --porcelain' failed in submodule dspal
fatal: 'git status --porcelain' failed in submodule src/lib/DriverFramework
make[3]: Entering directory `/c/Users/Brian/Documents/GitHubSources/ardupilot/modules/PX4Firmware/Build/px4fmu-v2_APM.build'
Loaded firmware for 9,0, size: 1023144 bytes, waiting for the bootloader...
If the board does not respond within 1-2 seconds, unplug and re-plug the USB connector.
attempting reboot on COM4...
if the board does not respond, unplug and re-plug the USB connector.