VTOL wiring to pixhawk

Hi all!

Going to attempt to build my first quadplane based on the Mozzie build (https://mozzie.readthedocs.io/en/latest/Overview.html) using an X-UAV Mini Talon. I would like to use a very similar design with one exception, I am planning to use Dragon Link for RC control, autonomous control and telemetry. For the flight controller I am going to use the Cube Orange with the standard carrier board.

I am unsure to which ports the 4 servos and 5 motors will connect to the board, i.e. what should connect to the aux ports and what should connect to the main ports.

Any and all advice is appreciated!