Greetings
Is it possible to use smartaudio in ardupilot with rush tank solo max 2.5 ?
Or use IRC trump in ardupilot with RUSHFPV OverShoot 3.3G 4W ?
I am using ELRS 900 RX in serial 1 ( CRSF )
And serial 2 for smartaudio or IRC trump ( TX wire only )
parameters I set in mission planner for the vtx :
Serial2_protocol → smartaudio 37 or IRC trump 44
Serialx_options → half-duplex
VTX_ENABLE set to 1
VTX_OPTIONS → set pit mode until armed
RC7_OPTIONS to 94 VTX power ( my tx aux 7 switch )
so far I could not see the power change when flipping the switch.
And OSD VTX power shows ?
Please help, Your help is much appreciated