Problem with Quadcopter to Fly Higher than 10cm

ArduCopter
1

HI im having problem with my quadcopter. The problem is the drone dont be able to fly more than 10cm from ground. This is my first time in building DIY drone. I really need you guys help.
Eventho there’s no other load in my drone it wont be able to fly higher

IM using ;
F450 frame
Pixhawk 2.4.8
2200kV brushless motor
11.1v 2200mAh battery
30A ESC
Transmitter FlySky
Reveiver Flysky fs-ia6b

can someone suggest me what should i do with it

2

What prop size?
Also grab the latest .bin log file off the memory card and save it to a filesharing service (dropbox, onedrive …) and post a link to it.
2200kv motors sounds a bit suspicious.

3

As @xfacta requested, a .bin file is necessary for any analysis of what is happening.

But glaringly 2200kV motors on 3S in a 450 frame does not sound like a flying combination.
5” to 6” props max, which is not going to give enough thrust for a 450.

4

hi xfacta thanks for replying.

im using 1045 props

5

how much battery voltage and current should i need?

6

Voltage and current is not the problem. If the motors you have are 2200kV they are the wrong motors for a 450 size quad. Which actual motors are they?

7

Hi, is it possible you mistakenly mentioned the 2212 model motors which are 920kv?
2200kv with 10 inch props shall burn the motors
HTH
Gal