Hi guys,
I have a radio issue with my setup. I have a phantom fx-61 setup with the pixracer. When I upload the master build, the radio works fine. I can configure my elevon and control manual mode fine. The issue I think is in the mixer, there is no pitch correction, only roll.
So I went and flashed a stable version of arduplane 3.7. I used the same method to configure my elevon. Both my pitch and roll correction works great, but now radio inputs aren’t recognized. The radio is definitely still bound and receiving inputs, but the commands are not recognized at all. Does anyone have suggestions to fix the radio on the stable build or how to fix the mixing in the master build?