Pixhawk 2.1 - Trigger Camera / UBEC 5V?


I trying to trigger my sony a5100 with the seagull map 2 in the mission planner but i dont have any signal or the led from the map 2 on.

Doesn’t the aux out have 5v? Do i have to use the ubec 5v like i use in the old pixhawk?

Thank you!

Best regards,


1 Like

The Aux end of the PH2.1 does not have it’s own power.
You will need to provide a 5V supply to operate anything from the OUT and AUX ports.

1 Like

Thank you Mike Boland.