Omnibusf4pro not in Historical builds?

I was looking through firmware.ardupilot.org in the plane section, and it seems that there aren’t any more historical builds for the omnibusf4pro target. Is this an accidental omission or a conscious decision? I think it was available in December 2019.

The Omnibus F4 got support through the port to ChibiOS, which only happened some time ago, so the support for this board is quite young.

Yeah, omnibusf4pro has been supported by plane stable since August 2018, and I believe there were historical builds on firmware.ardupilot.org in December 2019, but the target can no longer be found in the March and April 2020 historical builds.

We’ve been overflowing the flash on this board rather regularly, I’m
afraid. When that happens a binary isn’t produced.

Too much good stuff on that board for something with 1MB :slight_smile:

I do note it is present in the “latest” build, so we’re fine ATM…

Peter

Thanks @peterbarker that makes sense!

Sure enough, looked at 04/01/2020-05:04 which doesn’t have a build, and in the autotest log it shows a build fail from overflowing the flash!

Thanks for your help!