set up mini pix radiolink for helicopter
after complete radio calibration, there is no throttle output from ch 6 of mini pix.
Swash plate calibration was successfully done.
please let me know if anyone knows
thanks so much
set up mini pix radiolink for helicopter
after complete radio calibration, there is no throttle output from ch 6 of mini pix.
Swash plate calibration was successfully done.
please let me know if anyone knows
thanks so much
do you have telemetry connected ?
last time when i use my telemetry with QGroundControl virtual joystick enabled , my radio controls throttle stick was not working because FC responding to telemetry instead radio control.
thanks so much for reply. I have no telemetry with Qground control. All i have is only MP of radiolink.
By the way, if i switch from “helirsc” to RCIN3 which is throttle input,then there is coming out throttle signal from ch6.
thanks you
บนวันอังคารที่ 25 มิถุนายน 2019 02 นาฬิกา 57 นาที 05 วินาที GMT+7, hosein gh via ArduPilot Discourse, noreply@ardupilot.org เขียน:
June 24
do you have telemetry connected ?
last time when i use my telemetry with QGroundControl virtual joystick enabled , my radio controls throttle stick was not working because FC responding to telemetry instead radio control.