Log showing attitude controls different in mission planner and UAV log viewer

I was analyzing the logs in Mission planner and in Attitude control the desired pitch&roll and atual pitch and roll following closely respectively.

Where as I looked for same log in UAV log viewer but found strange that min, max and mean are matching with mission planner but the graph in attitude control is not following closely as it did in mission planner.

I need a suggestion which should i trust? I have attached the log below.
please have a look.

Looks like a simple scaling difference to me. Use whichever one you like best.

UAV Log Viewer lets you choose up to six y axes (each with its own scaling) for the same plot.
This is what it looks like when you plot everything on the same axis.
Note the controls are in the “Plots Setup” box at upper left.

@kd0aij Thank you, may I know what does each axes represents?

Signal name, axis number and color are displayed (and editable) in the Plots Setup box.
You can also pan and zoom using left and middle mouse buttons on each y-axis in the graph.
Just try it out…