hiii all
i need to get data of my esc in the mission planner status tab. what i did is upload the script ardupilot/libraries/AP_Scripting/drivers/Hobbywing_DataLink.lua at master · ArduPilot/ardupilot · GitHub
and connection according to ardupilot/libraries/AP_Scripting/drivers/Hobbywing_DataLink.md at master · ArduPilot/ardupilot · GitHub
i powered up datalink v2 from the bec. parameters are changed according to the documentation.
but no luck i dint get any output .
i dont no what did i do wrong. i think the parameter esc_hw_poles=24 i did(according to the magnetic coil in the motor i counted it).
datalink v2 module was blinking slow green. according to the datasheet of datalink v2
can you help me through this
