Having trouble connecting my pc and qground control via wifi or usb cube pilot blue..

Ground Control Software QGroundControl
1

Hello, having some issues connecting pc and drone remote controller. I have a blue cube controller. When connecting over hotspot they will not talk to each other. I would like them to so i can utilize terrain follow with my lidar drone. I tried to download terrain models on the controller but was getting error codes back when trying to download them over wifi. The same amount of error codes as tiles. When connecting via USB and turning the controller into developer mode to move my .plan files from my computer qgc, I get an error on opening files on controller. Attached is a photo of the error. It reads “error loading plan file (/storage/emulated/0/QGroundControl/Missions/MyMission.plan). Mission:TransectStyleComplexItem version 2 not supported” I even tried using an sd card and transferring my kml over but it didn’t hold the terrain differential. Just flew at an even 60 meters throughout.

error_message_qground

Any help would be appreciated.

Josh

2

So i think i found what was going on but i still cant remedy the situation. I dont see ardu pilot on the top right of my qground control when i open it up even though i selected ardu pilot on install in settings. any help would be awesome.

thanks,
josh