Flight Mode problem

Archive
1

Hello,

I use a Taranis X9D Plus TX / X8R Rx with a Quanum Nova quadcopter.
I configure my Nova with APM Planner v2.0.18 and when I move on my Tx the SD switch for CH5 it move CH7 baragraph in APM Planner and then I can’t configure the Flight Mode channel (it wait for CH5 not CH7) …
Can anybody help me with this strange reaction ?

Thank
JB

Sorry for my poor English, I’m French …

2

On your Taranis, press MENU then use the PAGE key to go to MIXER on page 6.
Press the + key to scroll through till you see CH5 on the left, what is next to it on the right?
And what does it say next to CH7?

3

Thank you MarkM,

When I move the SD position switch I can see the value of CH5 changing on the Taranis screen so I don’t think it’s a programmation problem. My mixer use the CH5 channel. I thonk this evening I will put a servo on the CH5 to see it moving.

4

Good idea to put a servo !!!
I realize that I invert the servo plug and then 5 was connected to 7, 6 to 6 and 7 to 5 …
Thank you MarkMbut it was a question of servo plug !!!

Solved, you can delete this topic …

Thanks
JB