I replaced my dead 3536 1400kv motor with a 3536 1450 kv motor, different brand.
After arming the Pixhawk the ESC beeps twice repeatedly after giving the motor full throttle, but only after full throttle when back on zero throttle.
It never did this with the old motor.
Any ideas?
Good day,
after you change esc and motors do you perform a new esc calibration?
No. Can’t remember how to do that. The old motor lasted about 5 years…
Just connect the drone in MP… just select option and choose mandatory hardware…, select esc calibration and choose what kind of escs you are using like normal esc… oneshot… OneShot125 etc. Just follow the instructions.
For a good calibration don’t forget the fully battery charge