I would like to control my flying wing with a SuperD ELRS Diversity Receiver connected to my Speedybee F405 Wing. In the ArduPlane documentation for the Speedybee F405 Wing, it says to set SERIAL11_PROTOCOL to 23, but I can only find SERIAL1_PROTOCOL to SERIAL6_PROTOCOL, and no SERIAL11_PROTOCOL. As a result, I am getting the error: “PreArm: Waiting for RC”.
It’s SERIAL1_PROTOCOL, because the RX is also connected to SERIAL1.
Once the receiver firmware was updated, everything started functioning perfectly.
Hi everyone,
I have a FrSky radio with a SuperG Nano Transmitter running OpenTX, controlling a SpedeebeeF405Wing with a Nano D receiver running ArduPlane. I’m trying to get telemetry data displayed on my radio using the Yaapu telemetry script, but I’m not sure what configurations need to be set up to make it all work.
The main thing I would like to see on the display is the current flight mode (in addition to other telemetry data such as GPS, battery, RSSI, etc.). Could anyone guide me on the necessary settings in OpenTX, ArduPlane, and any other configurations to get this working?
Thanks in advance for your help!