Hello! First post here so I apologize for any errors and whatnot:
I have a TBS crossfire TX and 8ch diversity receiver (connected to spektrum nx8). My FC is the speedybee f405 WING.
So, I’ve got telemetry working via bluetooth. I have RC inputs working by setting CRSF TX/RX outputs on my receiver and connecting them to my FC and MAVLINK TX/RX connected to a UART. This works…ish. It gets stuck on “getting params 1” and I have to cancel the dialogue box. I can see the HUD working and responding to me moving the plane around and the gps seems to work too. However, it is VERY delayed, at least 1-1.5s of delay and I cant write/change parameters with it. This is probably because bluetooth is just bad. Anyway, the crossfire TX has a usb port that can connect to a computer to flash and update firmware. Im wondering…is there any way I can communicate telemetry info via that and mission planner? It seems like a much cleaner solution than having MP talk to the crossfire via bluetooth. Or, is it possible to get it to change/write parameters via bluetooth?