This is for Australia only: I am selling my mower automation for a CupCadet ZT2 54", model 2022 and later as I have sold the mower.
The automation modifications are project box for (but not including) Pixhawk, Telemetry, GPS, etc. but all the servos and relevant brackets; plus custom-welded supports for the project box. The metal bits can be mounted without drilling any holes into the mower; however, the threads are cut into the existing holes for the bolts to affix the metal frame.
I am happy to sell only the automation pieces to someone who has the same mower and wants to automate it.
The six servos were $1,380 new, and were not used, as I did not complete the automation of the mower.
Except the two servos for the hydrostats were installed and calibrated, and then removed, as I did not finish the project in the allocated time.
Gas and choke servos:
Inside the project box:
Please note: the electronics mounted on red supports are not part of the sale.
The automation bits: $650 for four servos (the two big and two small ones, plus programmer) and $150 for the metal project box and support frames; it will come with all rods, helm links, nuts, bolts and washers.
I am happy to add more photos to the post in case there are any queries, or interest, and am happy to negotiate.
[This post initially included the mower which has been sold days after posting.]