I am converting a SplashDrone4 to ArduPilot.
Inside a special / partially membrane-sealed compartment, it has a I2C pressure sensor.
It’s device address is 0x77
0x77 could be a SPL06, MS5611, MS5607 , BMP388, BMP280, BMP085 and DPS280 - I tried to set
BARO_PROBE_EXT to all with no success.
It may be worth mentioning that I see this during the boot:
Those messages are about magnetometers - and I assume this does not affect the barometer issue.
AK09916: Wrong id
IST8310 found on bus 1 id 658441 address 0x0C