Servers by jDrones

Hardware   Pixhawk family


About the Pixhawk family category (1)
FrSky FLVSS LiPo Voltage Sensor with SMARTPort (10)
Issue during autonomous mission (3)
How to connect two different Receivers parallel for redundancy? ( 2 ) (30)
Pixhawk 2.4.8 and REV35 35A BLheli 4in1 Esc (3)
Pixhawk 2.4.8 + dshoot ESC (5)
Pixhawk 4 Fmu B/E Led is blinking red (1)
Pixhawk 2.4.8 hangs with solid yellow I/O Bootloader Mode LED (2)
How to enter DFM mode on Pixhawk (9)
Check BRD_TYPE no ms5611 found BG Pixracer clone AP3.4.6 (6)
Motor arming issue ( 2 ) (22)
Solved: Teensy PPM via Pulse Position library to Pixhawk (9)
ESP8266 WIFI on pixhawk ( 2 3 ) (40)
PreArm Trim Error (12)
Size of screws for fixing cube2.1 to mini carrier board? (6)
Radio Cali issue (2)
ESC telemetry wiring and OSD visibility (5)
Pixhawk 2.4.6 not getting GPS lock (4)
Save trim & auto trim doesn't have effect (10)
PixFalcon RSSI on OSD EZ UHF 4 Channel lite (3)
Pixhawk 4 motor testing issue (1)
CUAV Pixhack V5 Spektrum satellite issue (2)
Pixhawk "Bad Logging" with ChibiOS, works with NuttX? (13)
Can Port.hmmmmm (13)
Introducing a posi and alt hold into stabilize mode with additional sensor..and can I tune throttle in stabilize? (4)
Drotec Pixhawk 3 Pro (11)
Problem motor cannot connect to throttle remote (1)
SBUS Non-Inverted (12)
What waf board type do I use with my V3 Pixhawk1 ? 2MB versus 1MB? (2)
Pixhawk 4 FMU v5 ( 2 ) (29)