Servers by jDrones

ArduRover


Topic Replies Activity
Loiter turns and do_set_roi 3 December 4, 2019
Strange servo behaviour with "Brushed With Relay" Motor 8 December 3, 2019
Feasibility of loiter-dunk system 12 December 3, 2019
Rover 3.5.2 released 3 December 2, 2019
Strange behavior in Acro mode 2 December 2, 2019
Uncommanded throttle In Acro 5 December 2, 2019
Fence is unavailable to write to pixhawk 2 when use 915MHz data transfer on QGC 13 December 1, 2019
QGC shows your rover does not support fence 4 November 30, 2019
Issue: RTK Fixed F9P Altitude Shown as Absolute/MSL 6 November 28, 2019
Rover-4.0.0-rc4 available for beta testing! 13 November 27, 2019
Arduboat Build for Mapping & Water Quality Monitoring 48 November 27, 2019
Last rover build for APM 2.6 board 2 November 27, 2019
Rover-4.0.0-rc3 available for beta testing! 16 November 26, 2019
Modes fail to change 4 November 26, 2019
Controller and Converter 11 November 25, 2019
4g modem and or network 14 November 25, 2019
An idea to extend the arduboat functionality 6 November 25, 2019
Thruster spinning after disarm / skid steer problems 12 November 24, 2019
Help requested for POZYX guided rover 6 December 6, 2017
Invert Ralay output via RC8 and RC7 3 November 23, 2019
Dronekit Control Motors Command 1 November 23, 2019
RELPOSNED.. How to calibrate absolute heading 2 November 23, 2019
Need Help Setting Up Encoders 9 November 22, 2019
Motor driver packetized serial mode 5 November 21, 2019
Integration of Pixhawk Ardurover and Marvelmind indoor GPS 8 November 20, 2019
Boat Skid Steer SetUp Issue 3 November 18, 2019
EKF failsafe issue 6 November 18, 2019
Minimum sensor set for Rover 1 November 15, 2019
Rover-4.0.0-rc2 available for beta testing! 14 November 9, 2019
Turning light On/Off with MP and a PixRacer 8 November 13, 2019
 
Servers by jDrones