Servers by jDrones

ArduRover


Last step from rfd900 modem + PPM to the GCS via Bluetooth rather than via USB cable [ArduBoat] (5)
Course Drift using GPS+Wheel Encoder (EKF3) [Rover 3.3 / 3.4] (1)
Selecting Encoders for Wheel Chair Motors [Miscellaneous] (1)
Landsail in ArduBoat [ArduBoat] (2)
The rover never disarms itself! [Rover 3.5] (2)
Autonomous Floating Sauna [ArduBoat] (8)
Navio2 doesn't support input's on servo rail [Rover 3.5] (1)
Kakute F7 (not AIO) ArduBoat support [Rover 3.5] (15)
Sailboat Support ( 2 3 4 5 6 7 8 9 10 11 12 13 ) [ArduBoat] (250)
No map click available [ArduRover] (3)
Rangefinder avoiding direction_ solved [Rover 3.5] (4)
Can I operate my rover using Encoder + RTK at the same time [Rover 3.3 / 3.4] (5)
Adding waypoints and arming via handset seem to be evading me.. have the parameter changed? [Rover 3.5] (4)
Loiter function after serial port trigger [ArduBoat] (1)
How to setup this type of rover [Rover 3.5] (4)
Data Flash Logs Not opening: Says FMT missing [Rover 3.3 / 3.4] (5)
Should i fix the lidar or mount on a gimbal? [ArduBoat] (5)
servo or throttle, only one works at a time. [Rover 3.3 / 3.4] (6)
iPhone app that helps with large rover (mower) Compass calibration debugging [Rover 3.5] (2)
Bad AHRS on boot [Rover 3.3 / 3.4] (1)
First Run of a Nice Implementation of Autonomous Zero-Turn Mower [ArduRover] (3)
Three-wheeled rover with skid steering and servo controlled tailwheel [Rover 3.3 / 3.4] (11)
Sonar air boat working fine [ArduBoat] (15)
How to use 4ch Receiver? [Rover 3.5] (9)
Loiter Mode and Maintaining a compass heading [ArduBoat] (2)
Changing Power Order [Rover 3.3 / 3.4] (3)
How to store waypoint manually [Rover 3.5] (6)
Rover setup questions? ( 2 ) [Rover 3.5] (36)
Skid Steer Tuning Mode [Rover 3.5] (4)
UAVCAN ESC in Rover [ArduRover] (2)