Servers by jDrones

ArduRover   Rover 3.1


About the Rover 3.1 category (1)
SKID STEER OUT removed! Why? (13)
Rover without direction in auto mode f.3.1.2 rover or FLIGHT CHANGE MODE FAILED f.3.2.3 (1)
BUG? Urgent! Arduboat circling when arriving at a waypoint while logged waypoint distance value is static during Auto mission (1)
Dynamic Positioning for ArduBoat? (7)
Mavros Offboard/Guided with no GPS (6)
SKID-Steering Rover - 4 x PWM OUT *on ErleBrain 3* for 2 tracks (4)
Tighter 180 deg turning needed for rover at WP (7)
What events trigger FS_CRASH_CHECK? (4)
What controlls acceleration? (9)
Pixhawk4 rover auto mode (4)
Here+ RTK (Hex) support for Rover (2)
Rover with Skid Steering won't move in AUTO mode (12)
Manually Change Compass Offset Parameters (2)
Constant Compass Errors and Incorrect Heading (6)
No autopilot.....ㅠㅠ (4)
Wild thumper with sabertooth (3)
Mav_cmd_nav_set_yaw_speed (2)
ArduRover 3.1.1 Arming Issue ( 2 ) (29)
Using hardware Quadrature Encoder Counter instead of software count (5)
Arduino vs Pixhawk (8)
RM_MAP not working in skid steer mode (1)
USB with no mavlink / diagnostics (1)
Problem in downloading dataflash logs (1)
Can't change flight mode pwm value on second position on three position switch (4)
Questions about Skid Steer Rover (4)
PPM encoder and PixHawk (5)
Ardurover on beaglebone blue? (6)
Compass calibration not possible to do with big rover, what to do? (2)
AUTO MODE doesn't trigger the throttle (1)