Servers by jDrones

ArduRover   Operating/Tuning -- deprecated

ArduRover Pixhawk Servo Problem - Help! (8)
Rover tuning cruise_throttle (9)
Changing Pin Output (4)
Rover seems to look for the next waypoint (4)
Robot spins in circle in Steering mode, Rover 3.0 (9)
Delayed control? (1)
Ardurover dont stop at wayspoint in auto mode (19)
Pixhawk autopilot problems with skid steer rover (4)
Spektrum Right Stick Throttle (3)
ArduRover Reverse Mode (4)
Servos not responding to Radio input (8)
APM2.8 and EKF (2)
Skid Steer two ESCs poor stick control (5)
Speed/Thrust Limit in Manual Mode (8)
Joystick or gamepad control - how do I set it up? (2)
Not showing correct heading and “Error Compass Variance" (2)
Slow speed rover operation (3)
"Error Compass Variance" & rover does not track straight (3)
Reverse button in radio calibration swaps lever functions? (5)
Tune max/min output in skid steering (2)
A skid steering question (4)
Traxxas Slash is not moving forward (1)
L1 Controller is very High Is it Normal? (2)
Auto mode problem at first time setup (6)
Navigation using LIDAR and Raspberry Pi (2)
Importance of Compass/GPS Placement on Center-line (2)
Problem with autopilot (2)
ArduRover Continuously Driving In Circles (7)
First Time Rover Setup issues (3)
Target Cruise Speed Always Exceeded? (8)