Servers by jDrones

ArduCopter   Copter 3.4


Topic Replies Activity
About the Copter 3.4 category 2 May 26, 2016
EKF ground mag anomaly - has anyone heard of it? 21 August 1, 2020
How to use Precision Landing feature with companion computer? 35 July 17, 2020
RNGFND_PIN - unable to select Pin 14 (Pixhawk ADC 3.3V) for Sonar 8 June 20, 2020
Data transfer from ARDUINO to PIXHAWK through serial or I2C 18 June 8, 2020
[Resolved] What is the best firmware for the IR Lock precision landing? 19 June 3, 2020
There is no serial data when run the examples 6 May 27, 2020
Unexpected Land in AUTO MODE 6 May 5, 2020
Loiter can not forward straightly 10 March 31, 2020
Unknown crashes 4 March 20, 2020
Help modifying ArduCopter code 7 March 12, 2020
Loiter tuning terrible. Stabalize is perfect 5 February 13, 2020
The copter does not takeoff in Guided mode and EKF_GPS_TYPE = 3 (optical flow) 50 January 28, 2020
Why does the drone crash when refrash the parmeter list through a telemetry while the drone is in the air? 4 August 3, 2017
S1000 + Pixhawk min throttle issue? 7 December 25, 2019
LIS3MDL external compass not detected 8 December 3, 2019
Bad logging error 41 November 22, 2019
Auto landing gear deploy in RTL - setup confusion (Pixhawk) 18 November 13, 2019
Raspberry Pi and Pixhawk Connection 2 November 10, 2019
Disarming in the air 9 November 5, 2019
How to setup and check Optical flow 47 November 5, 2019
Setup Optical flow problem 16 November 5, 2019
Mag field mistake in auto analysis since Arducopter 3.4.x? 7 October 24, 2019
Need help diagnosing a possible mid-air pixhawk reboot 8 October 17, 2019
EKF altitude vs. POS.Alt 5 October 1, 2019
LightWare SF11/C 6 September 28, 2019
Faster, tighter turns for keeping front forward during Auto mission? 6 August 26, 2019
Strange climbrate limit in Guided mode (~5 m/s) 1 August 15, 2019
Motor out (ch1-4) pwm issues 2 July 23, 2019
EKF Compass Warnings during turns in Auto Mission 3 July 22, 2019
Servers by jDrones